summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-09-14 13:28:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-09-14 13:28:30 -0700
commit939ae58960bb5ce0c51776aec38877a401c03bcf (patch)
tree876ae3c12951c7057c31d8d35807f086a32b4463 /Documentation
parente75f801f1febabfa3cf3dcb3a1a05bf3c243d41e (diff)
parent4cb30b044a8f06e6e6418ae12c3c00bb02679dac (diff)
downloadlinux-939ae58960bb5ce0c51776aec38877a401c03bcf.tar.bz2
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - add support for the watchdog on Meson8 and Meson8m2 - add support for MediaTek MT7623 and MT7622 SoC - add support for the r8a77995 wdt - explicitly request exclusive reset control for asm9260_wdt, zx2967_wdt, rt2880_wdt and mt7621_wdt - improvements to asm9260_wdt, aspeed_wdt, renesas_wdt and cadence_wdt - add support for reading freq via CCF + suspend/resume support for of_xilinx_wdt - constify watchdog_ops and various device-id structures - revert of commit 1fccb73011ea ("iTCO_wdt: all versions count down twice") (Bug 196509) * git://www.linux-watchdog.org/linux-watchdog: (40 commits) watchdog: mei_wdt: constify mei_cl_device_id watchdog: sp805: constify amba_id watchdog: ziirave: constify i2c_device_id watchdog: sc1200: constify pnp_device_id dt-bindings: watchdog: renesas-wdt: Add support for the r8a77995 wdt watchdog: renesas_wdt: update copyright dates watchdog: renesas_wdt: make 'clk' a variable local to probe() watchdog: renesas_wdt: consistently use RuntimePM for clock management watchdog: aspeed: Support configuration of external signal properties dt-bindings: watchdog: aspeed: External reset signal properties drivers/watchdog: Add optional ASPEED device tree properties drivers/watchdog: ASPEED reference dev tree properties for config watchdog: da9063_wdt: Simplify by removing unneeded struct... watchdog: bcm7038: Check the return value from clk_prepare_enable() watchdog: qcom: Check for platform_get_resource() failure watchdog: of_xilinx_wdt: Add suspend/resume support watchdog: of_xilinx_wdt: Add support for reading freq via CCF dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoC watchdog: max77620_wdt: constify platform_device_id watchdog: pcwd_usb: constify usb_device_id ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt40
-rw-r--r--Documentation/devicetree/bindings/watchdog/meson-wdt.txt6
-rw-r--r--Documentation/devicetree/bindings/watchdog/mtk-wdt.txt2
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas-wdt.txt1
-rw-r--r--Documentation/watchdog/watchdog-parameters.txt2
5 files changed, 49 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
index c5e74d7b4406..c5077a1f5cb3 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -8,9 +8,49 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region
+Optional properties:
+
+ - aspeed,reset-type = "cpu|soc|system|none"
+
+ Reset behavior - Whenever a timeout occurs the watchdog can be programmed
+ to generate one of three different, mutually exclusive, types of resets.
+
+ Type "none" can be specified to indicate that no resets are to be done.
+ This is useful in situations where another watchdog engine on chip is
+ to perform the reset.
+
+ If 'aspeed,reset-type=' is not specfied the default is to enable system
+ reset.
+
+ Reset types:
+
+ - cpu: Reset CPU on watchdog timeout
+
+ - soc: Reset 'System on Chip' on watchdog timeout
+
+ - system: Reset system on watchdog timeout
+
+ - none: No reset is performed on timeout. Assumes another watchdog
+ engine is responsible for this.
+
+ - aspeed,alt-boot: If property is present then boot from alternate block.
+ - aspeed,external-signal: If property is present then signal is sent to
+ external reset counter (only WDT1 and WDT2). If not
+ specified no external signal is sent.
+ - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
+
+Optional properties for AST2500-compatible watchdogs:
+ - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
+ drive type to push-pull. The default is open-drain.
+ - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
+ is configured as push-pull, then set the pulse
+ polarity to active-high. The default is active-low.
+
Example:
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785000 0x1c>;
+ aspeed,reset-type = "system";
+ aspeed,external-signal;
};
diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
index ae70185d96e6..8a6d84cb36c9 100644
--- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
@@ -2,7 +2,11 @@ Meson SoCs Watchdog timer
Required properties:
-- compatible : should be "amlogic,meson6-wdt" or "amlogic,meson8b-wdt"
+- compatible : depending on the SoC this should be one of:
+ "amlogic,meson6-wdt" on Meson6 SoCs
+ "amlogic,meson8-wdt" and "amlogic,meson6-wdt" on Meson8 SoCs
+ "amlogic,meson8b-wdt" on Meson8b SoCs
+ "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
- reg : Specifies base physical address and size of the registers.
Example:
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 20ada673ab0c..235de0683bb6 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -6,6 +6,8 @@ Required properties:
"mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
"mediatek,mt6589-wdt": for MT6589
"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
+ "mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
+ "mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
- reg : Specifies base physical address and size of the registers.
diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
index 9e306afbbd49..bf6d1ca58af7 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
Examples with soctypes are:
- "renesas,r8a7795-wdt" (R-Car H3)
- "renesas,r8a7796-wdt" (R-Car M3-W)
+ - "renesas,r8a77995-wdt" (R-Car D3)
- "renesas,r7s72100-wdt" (RZ/A1)
When compatible with the generic version, nodes must list the SoC-specific
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
index b3526365ea8e..6f9d7b418917 100644
--- a/Documentation/watchdog/watchdog-parameters.txt
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -117,7 +117,7 @@ nowayout: Watchdog cannot be stopped once started
-------------------------------------------------
iTCO_wdt:
heartbeat: Watchdog heartbeat in seconds.
- (5<=heartbeat<=74 (TCO v1) or 1226 (TCO v2), default=30)
+ (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
-------------------------------------------------