summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-07-01 19:09:11 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-07-01 19:09:11 -0700
commit13d45f79a2af84de9083310db58b309a61065208 (patch)
tree06968d83ed6e5e23e1f729cf6f096f9a79f14f72 /Documentation
parent05fde26a943a9c55d8b498d97bb49d3d207e5069 (diff)
parentb67893206fc0a0e8af87130e67f3d8ae553fc87c (diff)
downloadlinux-13d45f79a2af84de9083310db58b309a61065208.tar.bz2
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem updates from Bryan Wu: "In this cycle, we finished to merge patches for LED Flash class driver. Other than that we have some bug fixes and new drivers for LED controllers" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (33 commits) leds:lp55xx: fix firmware loading error leds: fix max77693-led build errors leds: fix aat1290 build errors leds: aat1290: pass flags parameter to devm_gpiod_get leds: ktd2692: pass flags parameter to devm_gpiod_get drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c leds: aat1290: add support for V4L2 Flash sub-device DT: aat1290: Document handling external strobe sources leds: max77693: add support for V4L2 Flash sub-device media: Add registration helpers for V4L2 flash sub-devices v4l: async: Add a pointer to of_node to struct v4l2_subdev, match it Documentation: leds: Add description of v4l2-flash sub-device leds: add BCM6358 LED driver leds: add DT binding for BCM6358 LED controller leds: fix brightness changing when software blinking is active Documentation: leds-lp5523: describe master fader attributes leds: lp5523: add master_fader support leds: leds-gpio: Allow compile test if !GPIOLIB leds: leds-gpio: Add missing #include <linux/of.h> gpiolib: Add missing dummies for the unified device properties interface ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/leds/leds-aat1290.txt73
-rw-r--r--Documentation/devicetree/bindings/leds/leds-bcm6328.txt309
-rw-r--r--Documentation/devicetree/bindings/leds/leds-bcm6358.txt145
-rw-r--r--Documentation/devicetree/bindings/leds/leds-ktd2692.txt50
-rw-r--r--Documentation/devicetree/bindings/leds/leds-tlc591xx.txt40
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--Documentation/leds/leds-class-flash.txt51
-rw-r--r--Documentation/leds/leds-lp5523.txt30
8 files changed, 699 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
new file mode 100644
index 000000000000..c05ed91a4e42
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
@@ -0,0 +1,73 @@
+* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+The device is controlled through two pins: FL_EN and EN_SET. The pins when,
+asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+respectively. In order to add a capability of selecting the strobe signal source
+(e.g. CPU or camera sensor) there is an additional switch required, independent
+of the flash chip. The switch is controlled with pin control.
+
+Required properties:
+
+- compatible : Must be "skyworks,aat1290".
+- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
+- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
+
+Optional properties:
+- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
+ "default" and "host" must refer to the same pin configuration
+ node, which sets the host as a strobe signal provider. Entry
+ "isp" must refer to the pin configuration node, which sets the
+ ISP as a strobe signal provider.
+
+A discrete LED element connected to the device must be represented by a child
+node - see Documentation/devicetree/bindings/leds/common.txt.
+
+Required properties of the LED child node:
+- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+ Maximum flash LED supply current can be calculated using
+ following formula: I = 1A * 162kohm / Rset.
+- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+ Maximum flash timeout can be calculated using following
+ formula: T = 8.82 * 10^9 * Ct.
+
+Optional properties of the LED child node:
+- label : see Documentation/devicetree/bindings/leds/common.txt
+
+Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
+a switch that allows for routing strobe signal either from the host or from
+the camera sensor):
+
+#include "exynos4412.dtsi"
+
+aat1290 {
+ compatible = "skyworks,aat1290";
+ flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "host", "isp";
+ pinctrl-0 = <&camera_flash_host>;
+ pinctrl-1 = <&camera_flash_host>;
+ pinctrl-2 = <&camera_flash_isp>;
+
+ camera_flash: flash-led {
+ label = "aat1290-flash";
+ led-max-microamp = <520833>;
+ flash-max-microamp = <1012500>;
+ flash-timeout-us = <1940000>;
+ };
+};
+
+&pinctrl_0 {
+ camera_flash_host: camera-flash-host {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-val = <0>;
+ };
+
+ camera_flash_isp: camera-flash-isp {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-val = <1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
new file mode 100644
index 000000000000..f9e36adc0ebf
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
@@ -0,0 +1,309 @@
+LEDs connected to Broadcom BCM6328 controller
+
+This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
+In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+However, on some devices there are Serial LEDs (LEDs connected to a 74x164
+controller), which can either be controlled by software (exporting the 74x164
+as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+by hardware using this driver.
+Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
+exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
+controlled, so the only chance to keep them working is by using this driver.
+
+BCM6328 LED controller has a HWDIS register, which controls whether a LED
+should be controlled by a hardware signal instead of the MODE register value,
+with 0 meaning hardware control enabled and 1 hardware control disabled. This
+is usually 1:1 for hardware to LED signals, but through the activity/link
+registers you have some limited control over rerouting the LEDs (as
+explained later in brcm,link-signal-sources). Even if a LED is hardware
+controlled you are still able to make it blink or light it up if it isn't,
+but you can't turn it off if the hardware decides to light it up. For this
+reason, hardware controlled LEDs aren't registered as LED class devices.
+
+Required properties:
+ - compatible : should be "brcm,bcm6328-leds".
+ - #address-cells : must be 1.
+ - #size-cells : must be 0.
+ - reg : BCM6328 LED controller address and size.
+
+Optional properties:
+ - brcm,serial-leds : Boolean, enables Serial LEDs.
+ Default : false
+
+Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
+
+LED sub-node required properties:
+ - reg : LED pin number (only LEDs 0 to 23 are valid).
+
+LED sub-node optional properties:
+ a) Optional properties for sub-nodes related to software controlled LEDs:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - active-low : Boolean, makes LED active low.
+ Default : false
+ - default-state : see
+ Documentation/devicetree/bindings/leds/leds-gpio.txt
+ - linux,default-trigger : see
+ Documentation/devicetree/bindings/leds/common.txt
+
+ b) Optional properties for sub-nodes related to hardware controlled LEDs:
+ - brcm,hardware-controlled : Boolean, makes this LED hardware controlled.
+ Default : false
+ - brcm,link-signal-sources : An array of hardware link
+ signal sources. Up to four link hardware signals can get muxed into
+ these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
+ be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
+ 4 to 7. A signal can be muxed to more than one LED, and one LED can
+ have more than one source signal.
+ - brcm,activity-signal-sources : An array of hardware activity
+ signal sources. Up to four activity hardware signals can get muxed into
+ these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
+ be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
+ 4 to 7. A signal can be muxed to more than one LED, and one LED can
+ have more than one source signal.
+
+Examples:
+Scenario 1 : BCM6328 with 4 EPHY LEDs
+ leds0: led-controller@10000800 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10000800 0x24>;
+
+ alarm_red@2 {
+ reg = <2>;
+ active-low;
+ label = "red:alarm";
+ };
+ inet_green@3 {
+ reg = <3>;
+ active-low;
+ label = "green:inet";
+ };
+ power_green@4 {
+ reg = <4>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ ephy0_spd@17 {
+ reg = <17>;
+ brcm,hardware-controlled;
+ };
+ ephy1_spd@18 {
+ reg = <18>;
+ brcm,hardware-controlled;
+ };
+ ephy2_spd@19 {
+ reg = <19>;
+ brcm,hardware-controlled;
+ };
+ ephy3_spd@20 {
+ reg = <20>;
+ brcm,hardware-controlled;
+ };
+ };
+
+Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
+ leds0: led-controller@10001900 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10001900 0x24>;
+ brcm,serial-leds;
+
+ gphy0_spd0@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ };
+ gphy0_spd1@1 {
+ reg = <1>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <1>;
+ };
+ inet_red@2 {
+ reg = <2>;
+ active-low;
+ label = "red:inet";
+ };
+ dsl_green@3 {
+ reg = <3>;
+ active-low;
+ label = "green:dsl";
+ };
+ usb_green@4 {
+ reg = <4>;
+ active-low;
+ label = "green:usb";
+ };
+ wps_green@7 {
+ reg = <7>;
+ active-low;
+ label = "green:wps";
+ };
+ inet_green@8 {
+ reg = <8>;
+ active-low;
+ label = "green:inet";
+ };
+ ephy0_act@9 {
+ reg = <9>;
+ brcm,hardware-controlled;
+ };
+ ephy1_act@10 {
+ reg = <10>;
+ brcm,hardware-controlled;
+ };
+ ephy2_act@11 {
+ reg = <11>;
+ brcm,hardware-controlled;
+ };
+ gphy0_act@12 {
+ reg = <12>;
+ brcm,hardware-controlled;
+ };
+ ephy0_spd@13 {
+ reg = <13>;
+ brcm,hardware-controlled;
+ };
+ ephy1_spd@14 {
+ reg = <14>;
+ brcm,hardware-controlled;
+ };
+ ephy2_spd@15 {
+ reg = <15>;
+ brcm,hardware-controlled;
+ };
+ power_green@20 {
+ reg = <20>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ };
+
+Scenario 3 : BCM6362 with 1 LED for each EPHY
+ leds0: led-controller@10001900 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10001900 0x24>;
+
+ usb@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ brcm,activity-signal-sources = <0>;
+ /* USB link/activity routed to USB LED */
+ };
+ inet@1 {
+ reg = <1>;
+ brcm,hardware-controlled;
+ brcm,activity-signal-sources = <1>;
+ /* INET activity routed to INET LED */
+ };
+ ephy0@4 {
+ reg = <4>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <4>;
+ /* EPHY0 link routed to EPHY0 LED */
+ };
+ ephy1@5 {
+ reg = <5>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <5>;
+ /* EPHY1 link routed to EPHY1 LED */
+ };
+ ephy2@6 {
+ reg = <6>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <6>;
+ /* EPHY2 link routed to EPHY2 LED */
+ };
+ ephy3@7 {
+ reg = <7>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <7>;
+ /* EPHY3 link routed to EPHY3 LED */
+ };
+ power_green@20 {
+ reg = <20>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ };
+
+Scenario 4 : BCM6362 with 1 LED for all EPHYs
+ leds0: led-controller@10001900 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10001900 0x24>;
+
+ usb@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0 1>;
+ brcm,activity-signal-sources = <0 1>;
+ /* USB/INET link/activity routed to USB LED */
+ };
+ ephy@4 {
+ reg = <4>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <4 5 6 7>;
+ /* EPHY0/1/2/3 link routed to EPHY0 LED */
+ };
+ power_green@20 {
+ reg = <20>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ };
+
+Scenario 5 : BCM6362 with EPHY LEDs swapped
+ leds0: led-controller@10001900 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10001900 0x24>;
+
+ usb@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ brcm,activity-signal-sources = <0 1>;
+ /* USB link/act and INET act routed to USB LED */
+ };
+ ephy0@4 {
+ reg = <4>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <7>;
+ /* EPHY3 link routed to EPHY0 LED */
+ };
+ ephy1@5 {
+ reg = <5>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <6>;
+ /* EPHY2 link routed to EPHY1 LED */
+ };
+ ephy2@6 {
+ reg = <6>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <5>;
+ /* EPHY1 link routed to EPHY2 LED */
+ };
+ ephy3@7 {
+ reg = <7>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <4>;
+ /* EPHY0 link routed to EPHY3 LED */
+ };
+ power_green@20 {
+ reg = <20>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
new file mode 100644
index 000000000000..b22a55bcc65d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -0,0 +1,145 @@
+LEDs connected to Broadcom BCM6358 controller
+
+This controller is present on BCM6358 and BCM6368.
+In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
+which can either be controlled by software (exporting the 74x164 as spi-gpio.
+See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+by hardware using this driver.
+
+Required properties:
+ - compatible : should be "brcm,bcm6358-leds".
+ - #address-cells : must be 1.
+ - #size-cells : must be 0.
+ - reg : BCM6358 LED controller address and size.
+
+Optional properties:
+ - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8.
+ Default : 1
+ - brcm,clk-dat-low : Boolean, makes clock and data signals active low.
+ Default : false
+
+Each LED is represented as a sub-node of the brcm,bcm6358-leds device.
+
+LED sub-node required properties:
+ - reg : LED pin number (only LEDs 0 to 31 are valid).
+
+LED sub-node optional properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - active-low : Boolean, makes LED active low.
+ Default : false
+ - default-state : see
+ Documentation/devicetree/bindings/leds/leds-gpio.txt
+ - linux,default-trigger : see
+ Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+Scenario 1 : BCM6358
+ leds0: led-controller@fffe00d0 {
+ compatible = "brcm,bcm6358-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfffe00d0 0x8>;
+
+ alarm_white {
+ reg = <0>;
+ active-low;
+ label = "white:alarm";
+ };
+ tv_white {
+ reg = <2>;
+ active-low;
+ label = "white:tv";
+ };
+ tel_white {
+ reg = <3>;
+ active-low;
+ label = "white:tel";
+ };
+ adsl_white {
+ reg = <4>;
+ active-low;
+ label = "white:adsl";
+ };
+ };
+
+Scenario 2 : BCM6368
+ leds0: led-controller@100000d0 {
+ compatible = "brcm,bcm6358-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x100000d0 0x8>;
+ brcm,pol-low;
+ brcm,clk-div = <4>;
+
+ power_red {
+ reg = <0>;
+ active-low;
+ label = "red:power";
+ };
+ power_green {
+ reg = <1>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ power_blue {
+ reg = <2>;
+ label = "blue:power";
+ };
+ broadband_red {
+ reg = <3>;
+ active-low;
+ label = "red:broadband";
+ };
+ broadband_green {
+ reg = <4>;
+ label = "green:broadband";
+ };
+ broadband_blue {
+ reg = <5>;
+ active-low;
+ label = "blue:broadband";
+ };
+ wireless_red {
+ reg = <6>;
+ active-low;
+ label = "red:wireless";
+ };
+ wireless_green {
+ reg = <7>;
+ active-low;
+ label = "green:wireless";
+ };
+ wireless_blue {
+ reg = <8>;
+ label = "blue:wireless";
+ };
+ phone_red {
+ reg = <9>;
+ active-low;
+ label = "red:phone";
+ };
+ phone_green {
+ reg = <10>;
+ active-low;
+ label = "green:phone";
+ };
+ phone_blue {
+ reg = <11>;
+ label = "blue:phone";
+ };
+ upgrading_red {
+ reg = <12>;
+ active-low;
+ label = "red:upgrading";
+ };
+ upgrading_green {
+ reg = <13>;
+ active-low;
+ label = "green:upgrading";
+ };
+ upgrading_blue {
+ reg = <14>;
+ label = "blue:upgrading";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
new file mode 100644
index 000000000000..853737452580
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
@@ -0,0 +1,50 @@
+* Kinetic Technologies - KTD2692 Flash LED Driver
+
+KTD2692 is the ideal power solution for high-power flash LEDs.
+It uses ExpressWire single-wire programming for maximum flexibility.
+
+The ExpressWire interface through CTRL pin can control LED on/off and
+enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+Flash timeout, LVP(low voltage protection).
+
+Also, When the AUX pin is pulled high while CTRL pin is high,
+LED current will be ramped up to the flash-mode current level.
+
+Required properties:
+- compatible : Should be "kinetic,ktd2692".
+- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
+- aux-gpios : Specifier of the GPIO connected to AUX pin.
+
+Optional properties:
+- vin-supply : "vin" LED supply (2.7V to 5.5V).
+ See Documentation/devicetree/bindings/regulator/regulator.txt
+
+A discrete LED element connected to the device must be represented by a child
+node - See Documentation/devicetree/bindings/leds/common.txt
+
+Required properties for flash LED child nodes:
+ See Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : Minimum Threshold for Timer protection
+ is defined internally (Maximum 300mA).
+- flash-max-microamp : Flash LED maximum current
+ Formula : I(mA) = 15000 / Rset.
+- flash-max-timeout-us : Flash LED maximum timeout.
+
+Optional properties for flash LED child nodes:
+- label : See Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+ktd2692 {
+ compatible = "kinetic,ktd2692";
+ ctrl-gpios = <&gpc0 1 0>;
+ aux-gpios = <&gpc0 2 0>;
+ vin-supply = <&vbat>;
+
+ flash-led {
+ label = "ktd2692-flash";
+ led-max-microamp = <300000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1835000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt
new file mode 100644
index 000000000000..3bbbf7024411
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt
@@ -0,0 +1,40 @@
+LEDs connected to tlc59116 or tlc59108
+
+Required properties
+- compatible: should be "ti,tlc59116" or "ti,tlc59108"
+- #address-cells: must be 1
+- #size-cells: must be 0
+- reg: typically 0x68
+
+Each led is represented as a sub-node of the ti,tlc59116.
+See Documentation/devicetree/bindings/leds/common.txt
+
+LED sub-node properties:
+- reg: number of LED line, 0 to 15 or 0 to 7
+- label: (optional) name of LED
+- linux,default-trigger : (optional)
+
+Examples:
+
+tlc59116@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59116";
+ reg = <0x68>;
+
+ wan@0 {
+ label = "wrt1900ac:amber:wan";
+ reg = <0x0>;
+ };
+
+ 2g@2 {
+ label = "wrt1900ac:white:2g";
+ reg = <0x2>;
+ };
+
+ alive@9 {
+ label = "wrt1900ac:green:alive";
+ reg = <0x9>;
+ linux,default_trigger = "heartbeat";
+ };
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 7b607761b774..347c8fdcf250 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -114,6 +114,7 @@ isee ISEE 2007 S.L.
isil Intersil
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
+kinetic Kinetic Technologies
lacie LaCie
lantiq Lantiq Semiconductor
lenovo Lenovo Group Ltd.
diff --git a/Documentation/leds/leds-class-flash.txt b/Documentation/leds/leds-class-flash.txt
index 19bb67355424..8da3c6f4b60b 100644
--- a/Documentation/leds/leds-class-flash.txt
+++ b/Documentation/leds/leds-class-flash.txt
@@ -20,3 +20,54 @@ Following sysfs attributes are exposed for controlling flash LED devices:
- max_flash_timeout
- flash_strobe
- flash_fault
+
+
+V4L2 flash wrapper for flash LEDs
+=================================
+
+A LED subsystem driver can be controlled also from the level of VideoForLinux2
+subsystem. In order to enable this CONFIG_V4L2_FLASH_LED_CLASS symbol has to
+be defined in the kernel config.
+
+The driver must call the v4l2_flash_init function to get registered in the
+V4L2 subsystem. The function takes six arguments:
+- dev : flash device, e.g. an I2C device
+- of_node : of_node of the LED, may be NULL if the same as device's
+- fled_cdev : LED flash class device to wrap
+- iled_cdev : LED flash class device representing indicator LED associated with
+ fled_cdev, may be NULL
+- ops : V4L2 specific ops
+ * external_strobe_set - defines the source of the flash LED strobe -
+ V4L2_CID_FLASH_STROBE control or external source, typically
+ a sensor, which makes it possible to synchronise the flash
+ strobe start with exposure start,
+ * intensity_to_led_brightness and led_brightness_to_intensity - perform
+ enum led_brightness <-> V4L2 intensity conversion in a device
+ specific manner - they can be used for devices with non-linear
+ LED current scale.
+- config : configuration for V4L2 Flash sub-device
+ * dev_name - the name of the media entity, unique in the system,
+ * flash_faults - bitmask of flash faults that the LED flash class
+ device can report; corresponding LED_FAULT* bit definitions are
+ available in <linux/led-class-flash.h>,
+ * torch_intensity - constraints for the LED in TORCH mode
+ in microamperes,
+ * indicator_intensity - constraints for the indicator LED
+ in microamperes,
+ * has_external_strobe - determines whether the flash strobe source
+ can be switched to external,
+
+On remove the v4l2_flash_release function has to be called, which takes one
+argument - struct v4l2_flash pointer returned previously by v4l2_flash_init.
+This function can be safely called with NULL or error pointer argument.
+
+Please refer to drivers/leds/leds-max77693.c for an exemplary usage of the
+v4l2 flash wrapper.
+
+Once the V4L2 sub-device is registered by the driver which created the Media
+controller device, the sub-device node acts just as a node of a native V4L2
+flash API device would. The calls are simply routed to the LED flash API.
+
+Opening the V4L2 flash sub-device makes the LED subsystem sysfs interface
+unavailable. The interface is re-enabled after the V4L2 flash sub-device
+is closed.
diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt
index 5b3e91d4ac59..0dbbd279c9b9 100644
--- a/Documentation/leds/leds-lp5523.txt
+++ b/Documentation/leds/leds-lp5523.txt
@@ -49,6 +49,36 @@ There are two ways to run LED patterns.
2) Firmware interface - LP55xx common interface
For the details, please refer to 'firmware' section in leds-lp55xx.txt
+LP5523 has three master faders. If a channel is mapped to one of
+the master faders, its output is dimmed based on the value of the master
+fader.
+
+For example,
+
+ echo "123000123" > master_fader_leds
+
+creates the following channel-fader mappings:
+
+ channel 0,6 to master_fader1
+ channel 1,7 to master_fader2
+ channel 2,8 to master_fader3
+
+Then, to have 25% of the original output on channel 0,6:
+
+ echo 64 > master_fader1
+
+To have 0% of the original output (i.e. no output) channel 1,7:
+
+ echo 0 > master_fader2
+
+To have 100% of the original output (i.e. no dimming) on channel 2,8:
+
+ echo 255 > master_fader3
+
+To clear all master fader controls:
+
+ echo "000000000" > master_fader_leds
+
Selftest uses always the current from the platform data.
Each channel contains led current settings.