Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...

4 files changed, 85 insertions, 14 deletions

diff --git a/Documentation/ABI/stable/sysfs-driver-w1_ds28e04 b/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
new file mode 100644
index 000000000000..26579ee868c9
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
@@ -0,0 +1,15 @@
+What:		/sys/bus/w1/devices/.../pio
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the two PIO's of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
+
+
+
+What:		/sys/bus/w1/devices/.../eeprom
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the EEPROM memory of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04 for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg
index 281ecc5f9709..7e7e07a82e0e 100644
--- a/Documentation/ABI/testing/dev-kmsg
+++ b/Documentation/ABI/testing/dev-kmsg
@@ -58,16 +58,18 @@ Description:	The /dev/kmsg character device node provides userspace access
 
 		The output format consists of a prefix carrying the syslog
 		prefix including priority and facility, the 64 bit message
-		sequence number and the monotonic timestamp in microseconds.
-		The values are separated by a ','. Future extensions might
-		add more comma separated values before the terminating ';'.
-		Unknown values should be gracefully ignored.
+		sequence number and the monotonic timestamp in microseconds,
+		and a flag field. All fields are separated by a ','.
+
+		Future extensions might add more comma separated values before
+		the terminating ';'. Unknown fields and values should be
+		gracefully ignored.
 
 		The human readable text string starts directly after the ';'
 		and is terminated by a '\n'. Untrusted values derived from
 		hardware or other facilities are printed, therefore
-		all non-printable characters in the log message are escaped
-		by "\x00" C-style hex encoding.
+		all non-printable characters and '\' itself in the log message
+		are escaped by "\x00" C-style hex encoding.
 
 		A line starting with ' ', is a continuation line, adding
 		key/value pairs to the log message, which provide the machine
@@ -75,11 +77,11 @@ Description:	The /dev/kmsg character device node provides userspace access
 		userspace.
 
 		Example:
-		7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
+		7,160,424069,-;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
 		 SUBSYSTEM=acpi
 		 DEVICE=+acpi:PNP0A03:00
-		6,339,5140900;NET: Registered protocol family 10
-		30,340,5690716;udevd[80]: starting version 181
+		6,339,5140900,-;NET: Registered protocol family 10
+		30,340,5690716,-;udevd[80]: starting version 181
 
 		The DEVICE= key uniquely identifies devices the following way:
 		  b12:8        - block dev_t
@@ -87,4 +89,13 @@ Description:	The /dev/kmsg character device node provides userspace access
 		  n8           - netdev ifindex
 		  +sound:card0 - subsystem:devname
 
+		The flags field carries '-' by default. A 'c' indicates a
+		fragment of a line. All following fragments are flagged with
+		'+'. Note, that these hints about continuation lines are not
+		neccessarily correct, and the stream could be interleaved with
+		unrelated messages, but merging the lines in the output
+		usually produces better human readable results. A similar
+		logic is used internally when messages are printed to the
+		console, /proc/kmsg or the syslog() syscall.
+
 Users:		dmesg(1), userspace kernel log consumers
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index 4a7b54bd37e8..b0714d8f678a 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -1,4 +1,4 @@
-Everything you ever wanted to know about Linux 2.6 -stable releases.
+Everything you ever wanted to know about Linux -stable releases.
 
 Rules on what kind of patches are accepted, and which ones are not, into the
 "-stable" tree:
@@ -42,10 +42,10 @@ Procedure for submitting patches to the -stable tree:
    cherry-picked than this can be specified in the following format in
    the sign-off area:
 
-     Cc: <stable@vger.kernel.org> # .32.x: a1f84a3: sched: Check for idle
-     Cc: <stable@vger.kernel.org> # .32.x: 1b9508f: sched: Rate-limit newidle
-     Cc: <stable@vger.kernel.org> # .32.x: fd21073: sched: Fix affinity logic
-     Cc: <stable@vger.kernel.org> # .32.x
+     Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle
+     Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle
+     Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic
+     Cc: <stable@vger.kernel.org> # 3.3.x
     Signed-off-by: Ingo Molnar <mingo@elte.hu>
 
    The tag sequence has the meaning of:
@@ -79,6 +79,15 @@ Review cycle:
    security kernel team, and not go through the normal review cycle.
    Contact the kernel security team for more details on this procedure.
 
+Trees:
+
+ - The queues of patches, for both completed versions and in progress
+   versions can be found at:
+	http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
+ - The finalized and tagged releases of all stable kernels can be found
+   in separate branches per version at:
+	http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git
+
 
 Review committee:
 
diff --git a/Documentation/w1/slaves/w1_ds28e04 b/Documentation/w1/slaves/w1_ds28e04
new file mode 100644
index 000000000000..85bc9a7e02fe
--- /dev/null
+++ b/Documentation/w1/slaves/w1_ds28e04
@@ -0,0 +1,36 @@
+Kernel driver w1_ds28e04
+========================
+
+Supported chips:
+  * Maxim DS28E04-100 4096-Bit Addressable 1-Wire EEPROM with PIO
+
+supported family codes:
+	W1_FAMILY_DS28E04	0x1C
+
+Author: Markus Franke, <franke.m@sebakmt.com> <franm@hrz.tu-chemnitz.de>
+
+Description
+-----------
+
+Support is provided through the sysfs files "eeprom" and "pio". CRC checking
+during memory accesses can optionally be enabled/disabled via the device
+attribute "crccheck". The strong pull-up can optionally be enabled/disabled
+via the module parameter "w1_strong_pullup".
+
+Memory Access
+
+	A read operation on the "eeprom" file reads the given amount of bytes
+	from the EEPROM of the DS28E04.
+
+	A write operation on the "eeprom" file writes the given byte sequence
+	to the EEPROM of the DS28E04. If CRC checking mode is enabled only
+	fully alligned blocks of 32 bytes with valid CRC16 values (in bytes 30
+	and 31) are allowed to be written.
+
+PIO Access
+
+	The 2 PIOs of the DS28E04-100 are accessible via the "pio" sysfs file.
+
+	The current status of the PIO's is returned as an 8 bit value. Bit 0/1
+	represent the state of PIO_0/PIO_1. Bits 2..7 do not care. The PIO's are
+	driven low-active, i.e. the driver delivers/expects low-active values.