summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-21 10:15:51 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-21 10:15:51 -0700
commitc7c66c0cb0c77b1a8edf09bca57d922312d58030 (patch)
tree77277103c5f16aa4dee64978a060933d92e14776 /Documentation
parent9f3938346a5c1fa504647670edb5fea5756cfb00 (diff)
parent98e8bdafeb4728a6af7bbcbcc3984967d1cf2bc1 (diff)
downloadlinux-c7c66c0cb0c77b1a8edf09bca57d922312d58030.tar.bz2
Merge tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates for 3.4 from Rafael Wysocki: "Assorted extensions and fixes including: * Introduction of early/late suspend/hibernation device callbacks. * Generic PM domains extensions and fixes. * devfreq updates from Axel Lin and MyungJoo Ham. * Device PM QoS updates. * Fixes of concurrency problems with wakeup sources. * System suspend and hibernation fixes." * tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (43 commits) PM / Domains: Check domain status during hibernation restore of devices PM / devfreq: add relation of recommended frequency. PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on() PM / shmobile: Make CMT driver use pm_genpd_dev_always_on() PM / shmobile: Make TMU driver use pm_genpd_dev_always_on() PM / Domains: Introduce "always on" device flag PM / Domains: Fix hibernation restore of devices, v2 PM / Domains: Fix handling of wakeup devices during system resume sh_mmcif / PM: Use PM QoS latency constraint tmio_mmc / PM: Use PM QoS latency constraint PM / QoS: Make it possible to expose PM QoS latency constraints PM / Sleep: JBD and JBD2 missing set_freezable() PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case PM / Freezer: Remove references to TIF_FREEZE in comments PM / Sleep: Add more wakeup source initialization routines PM / Hibernate: Enable usermodehelpers in hibernate() error path PM / Sleep: Make __pm_stay_awake() delete wakeup source timers PM / Sleep: Fix race conditions related to wakeup source timer function PM / Sleep: Fix possible infinite loop during wakeup source destruction PM / Hibernate: print physical addresses consistently with other parts of kernel ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-devices-power18
-rw-r--r--Documentation/devicetree/bindings/arm/exynos/power_domain.txt21
-rw-r--r--Documentation/power/devices.txt93
-rw-r--r--Documentation/power/freezing-of-tasks.txt21
4 files changed, 121 insertions, 32 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 8ffbc25376a0..840f7d64d483 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -165,3 +165,21 @@ Description:
Not all drivers support this attribute. If it isn't supported,
attempts to read or write it will yield I/O errors.
+
+What: /sys/devices/.../power/pm_qos_latency_us
+Date: March 2012
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/pm_qos_resume_latency_us attribute
+ contains the PM QoS resume latency limit for the given device,
+ which is the maximum allowed time it can take to resume the
+ device, after it has been suspended at run time, from a resume
+ request to the moment the device will be ready to process I/O,
+ in microseconds. If it is equal to 0, however, this means that
+ the PM QoS resume latency may be arbitrary.
+
+ Not all drivers support this attribute. If it isn't supported,
+ it is not present.
+
+ This attribute has no effect on system-wide suspend/resume and
+ hibernation.
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
new file mode 100644
index 000000000000..6528e215c5fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -0,0 +1,21 @@
+* Samsung Exynos Power Domains
+
+Exynos processors include support for multiple power domains which are used
+to gate power to one or more peripherals on the processor.
+
+Required Properties:
+- compatiable: should be one of the following.
+ * samsung,exynos4210-pd - for exynos4210 type power domain.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+Optional Properties:
+- samsung,exynos4210-pd-off: Specifies that the power domain is in turned-off
+ state during boot and remains to be turned-off until explicitly turned-on.
+
+Example:
+
+ lcd0: power-domain-lcd0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C00 0x10>;
+ };
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 20af7def23c8..872815cd41d3 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -96,6 +96,12 @@ struct dev_pm_ops {
int (*thaw)(struct device *dev);
int (*poweroff)(struct device *dev);
int (*restore)(struct device *dev);
+ int (*suspend_late)(struct device *dev);
+ int (*resume_early)(struct device *dev);
+ int (*freeze_late)(struct device *dev);
+ int (*thaw_early)(struct device *dev);
+ int (*poweroff_late)(struct device *dev);
+ int (*restore_early)(struct device *dev);
int (*suspend_noirq)(struct device *dev);
int (*resume_noirq)(struct device *dev);
int (*freeze_noirq)(struct device *dev);
@@ -305,7 +311,7 @@ Entering System Suspend
-----------------------
When the system goes into the standby or memory sleep state, the phases are:
- prepare, suspend, suspend_noirq.
+ prepare, suspend, suspend_late, suspend_noirq.
1. The prepare phase is meant to prevent races by preventing new devices
from being registered; the PM core would never know that all the
@@ -324,7 +330,12 @@ When the system goes into the standby or memory sleep state, the phases are:
appropriate low-power state, depending on the bus type the device is on,
and they may enable wakeup events.
- 3. The suspend_noirq phase occurs after IRQ handlers have been disabled,
+ 3 For a number of devices it is convenient to split suspend into the
+ "quiesce device" and "save device state" phases, in which cases
+ suspend_late is meant to do the latter. It is always executed after
+ runtime power management has been disabled for all devices.
+
+ 4. The suspend_noirq phase occurs after IRQ handlers have been disabled,
which means that the driver's interrupt handler will not be called while
the callback method is running. The methods should save the values of
the device's registers that weren't saved previously and finally put the
@@ -359,7 +370,7 @@ Leaving System Suspend
----------------------
When resuming from standby or memory sleep, the phases are:
- resume_noirq, resume, complete.
+ resume_noirq, resume_early, resume, complete.
1. The resume_noirq callback methods should perform any actions needed
before the driver's interrupt handlers are invoked. This generally
@@ -375,14 +386,18 @@ When resuming from standby or memory sleep, the phases are:
device driver's ->pm.resume_noirq() method to perform device-specific
actions.
- 2. The resume methods should bring the the device back to its operating
+ 2. The resume_early methods should prepare devices for the execution of
+ the resume methods. This generally involves undoing the actions of the
+ preceding suspend_late phase.
+
+ 3 The resume methods should bring the the device back to its operating
state, so that it can perform normal I/O. This generally involves
undoing the actions of the suspend phase.
- 3. The complete phase uses only a bus callback. The method should undo the
- actions of the prepare phase. Note, however, that new children may be
- registered below the device as soon as the resume callbacks occur; it's
- not necessary to wait until the complete phase.
+ 4. The complete phase should undo the actions of the prepare phase. Note,
+ however, that new children may be registered below the device as soon as
+ the resume callbacks occur; it's not necessary to wait until the
+ complete phase.
At the end of these phases, drivers should be as functional as they were before
suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are
@@ -429,8 +444,8 @@ an image of the system memory while everything is stable, reactivate all
devices (thaw), write the image to permanent storage, and finally shut down the
system (poweroff). The phases used to accomplish this are:
- prepare, freeze, freeze_noirq, thaw_noirq, thaw, complete,
- prepare, poweroff, poweroff_noirq
+ prepare, freeze, freeze_late, freeze_noirq, thaw_noirq, thaw_early,
+ thaw, complete, prepare, poweroff, poweroff_late, poweroff_noirq
1. The prepare phase is discussed in the "Entering System Suspend" section
above.
@@ -441,7 +456,11 @@ system (poweroff). The phases used to accomplish this are:
save time it's best not to do so. Also, the device should not be
prepared to generate wakeup events.
- 3. The freeze_noirq phase is analogous to the suspend_noirq phase discussed
+ 3. The freeze_late phase is analogous to the suspend_late phase described
+ above, except that the device should not be put in a low-power state and
+ should not be allowed to generate wakeup events by it.
+
+ 4. The freeze_noirq phase is analogous to the suspend_noirq phase discussed
above, except again that the device should not be put in a low-power
state and should not be allowed to generate wakeup events.
@@ -449,15 +468,19 @@ At this point the system image is created. All devices should be inactive and
the contents of memory should remain undisturbed while this happens, so that the
image forms an atomic snapshot of the system state.
- 4. The thaw_noirq phase is analogous to the resume_noirq phase discussed
+ 5. The thaw_noirq phase is analogous to the resume_noirq phase discussed
above. The main difference is that its methods can assume the device is
in the same state as at the end of the freeze_noirq phase.
- 5. The thaw phase is analogous to the resume phase discussed above. Its
+ 6. The thaw_early phase is analogous to the resume_early phase described
+ above. Its methods should undo the actions of the preceding
+ freeze_late, if necessary.
+
+ 7. The thaw phase is analogous to the resume phase discussed above. Its
methods should bring the device back to an operating state, so that it
can be used for saving the image if necessary.
- 6. The complete phase is discussed in the "Leaving System Suspend" section
+ 8. The complete phase is discussed in the "Leaving System Suspend" section
above.
At this point the system image is saved, and the devices then need to be
@@ -465,16 +488,19 @@ prepared for the upcoming system shutdown. This is much like suspending them
before putting the system into the standby or memory sleep state, and the phases
are similar.
- 7. The prepare phase is discussed above.
+ 9. The prepare phase is discussed above.
+
+ 10. The poweroff phase is analogous to the suspend phase.
- 8. The poweroff phase is analogous to the suspend phase.
+ 11. The poweroff_late phase is analogous to the suspend_late phase.
- 9. The poweroff_noirq phase is analogous to the suspend_noirq phase.
+ 12. The poweroff_noirq phase is analogous to the suspend_noirq phase.
-The poweroff and poweroff_noirq callbacks should do essentially the same things
-as the suspend and suspend_noirq callbacks. The only notable difference is that
-they need not store the device register values, because the registers should
-already have been stored during the freeze or freeze_noirq phases.
+The poweroff, poweroff_late and poweroff_noirq callbacks should do essentially
+the same things as the suspend, suspend_late and suspend_noirq callbacks,
+respectively. The only notable difference is that they need not store the
+device register values, because the registers should already have been stored
+during the freeze, freeze_late or freeze_noirq phases.
Leaving Hibernation
@@ -518,22 +544,25 @@ To achieve this, the image kernel must restore the devices' pre-hibernation
functionality. The operation is much like waking up from the memory sleep
state, although it involves different phases:
- restore_noirq, restore, complete
+ restore_noirq, restore_early, restore, complete
1. The restore_noirq phase is analogous to the resume_noirq phase.
- 2. The restore phase is analogous to the resume phase.
+ 2. The restore_early phase is analogous to the resume_early phase.
+
+ 3. The restore phase is analogous to the resume phase.
- 3. The complete phase is discussed above.
+ 4. The complete phase is discussed above.
-The main difference from resume[_noirq] is that restore[_noirq] must assume the
-device has been accessed and reconfigured by the boot loader or the boot kernel.
-Consequently the state of the device may be different from the state remembered
-from the freeze and freeze_noirq phases. The device may even need to be reset
-and completely re-initialized. In many cases this difference doesn't matter, so
-the resume[_noirq] and restore[_norq] method pointers can be set to the same
-routines. Nevertheless, different callback pointers are used in case there is a
-situation where it actually matters.
+The main difference from resume[_early|_noirq] is that restore[_early|_noirq]
+must assume the device has been accessed and reconfigured by the boot loader or
+the boot kernel. Consequently the state of the device may be different from the
+state remembered from the freeze, freeze_late and freeze_noirq phases. The
+device may even need to be reset and completely re-initialized. In many cases
+this difference doesn't matter, so the resume[_early|_noirq] and
+restore[_early|_norq] method pointers can be set to the same routines.
+Nevertheless, different callback pointers are used in case there is a situation
+where it actually does matter.
Device Power Management Domains
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index ebd7490ef1df..ec715cd78fbb 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -63,6 +63,27 @@ devices have been reinitialized, the function thaw_processes() is called in
order to clear the PF_FROZEN flag for each frozen task. Then, the tasks that
have been frozen leave __refrigerator() and continue running.
+
+Rationale behind the functions dealing with freezing and thawing of tasks:
+-------------------------------------------------------------------------
+
+freeze_processes():
+ - freezes only userspace tasks
+
+freeze_kernel_threads():
+ - freezes all tasks (including kernel threads) because we can't freeze
+ kernel threads without freezing userspace tasks
+
+thaw_kernel_threads():
+ - thaws only kernel threads; this is particularly useful if we need to do
+ anything special in between thawing of kernel threads and thawing of
+ userspace tasks, or if we want to postpone the thawing of userspace tasks
+
+thaw_processes():
+ - thaws all tasks (including kernel threads) because we can't thaw userspace
+ tasks without thawing kernel threads
+
+
III. Which kernel threads are freezable?
Kernel threads are not freezable by default. However, a kernel thread may clear