summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-15 17:39:07 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-15 17:39:07 -0700
commit54dbe75bbf1e189982516de179147208e90b5e45 (patch)
tree523ba6dd21d2f9257b73d95d289095b116da0f75 /Documentation
parentdafa5f6577a9eecd2941add553d1672c30b02364 (diff)
parent557ce95051c8eff67af48612ab350d8408aa0541 (diff)
downloadlinux-54dbe75bbf1e189982516de179147208e90b5e45.tar.bz2
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.19. Rob has some new hardware support for new qualcomm hw that I'll send along separately. This has the display part of it, the remaining pull is for the acceleration engine. This also contains a wound-wait/wait-die mutex rework, Peter has acked it for merging via my tree. Otherwise mostly the usual level of activity. Summary: core: - Wound-wait/wait-die mutex rework - Add writeback connector type - Add "content type" property for HDMI - Move GEM bo to drm_framebuffer - Initial gpu scheduler documentation - GPU scheduler fixes for dying processes - Console deferred fbcon takeover support - Displayport support for CEC tunneling over AUX panel: - otm8009a panel driver fixes - Innolux TV123WAM and G070Y2-L01 panel driver - Ilitek ILI9881c panel driver - Rocktech RK070ER9427 LCD - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6 - DLC DLC0700YZG-1 - BOE HV070WSA-100 - newhaven, nhd-4.3-480272ef-atxl LCD - DataImage SCF0700C48GGU18 - Sharp LQ035Q7DB03 - p079zca: Refactor to support multiple panels tinydrm: - ILI9341 display panel New driver: - vkms - virtual kms driver to testing. i915: - Icelake: Display enablement DSI support IRQ support Powerwell support - GPU reset fixes and improvements - Full ppgtt support refactoring - PSR fixes and improvements - Execlist improvments - GuC related fixes amdgpu: - Initial amdgpu documentation - JPEG engine support on VCN - CIK uses powerplay by default - Move to using core PCIE functionality for gens/lanes - DC/Powerplay interface rework - Stutter mode support for RV - Vega12 Powerplay updates - GFXOFF fixes - GPUVM fault debugging - Vega12 GFXOFF - DC improvements - DC i2c/aux changes - UVD 7.2 fixes - Powerplay fixes for Polaris12, CZ/ST - command submission bo_list fixes amdkfd: - Raven support - Power management fixes udl: - Cleanups and fixes nouveau: - misc fixes and cleanups. msm: - DPU1 support display controller in sdm845 - GPU coredump support. vmwgfx: - Atomic modesetting validation fixes - Support for multisample surfaces armada: - Atomic modesetting support completed. exynos: - IPPv2 fixes - Move g2d to component framework - Suspend/resume support cleanups - Driver cleanups imx: - CSI configuration improvements - Driver cleanups - Use atomic suspend/resume helpers - ipu-v3 V4L2 XRGB32/XBGR32 support pl111: - Add Nomadik LCDC variant v3d: - GPU scheduler jobs management sun4i: - R40 display engine support - TCON TOP driver mediatek: - MT2712 SoC support rockchip: - vop fixes omapdrm: - Workaround for DRA7 errata i932 - Fix mm_list locking mali-dp: - Writeback implementation PM improvements - Internal error reporting debugfs tilcdc: - Single fix for deferred probing hdlcd: - Teardown fixes tda998x: - Converted to a bridge driver. etnaviv: - Misc fixes" * tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits) drm/amdgpu/sriov: give 8s for recover vram under RUNTIME drm/scheduler: fix param documentation drm/i2c: tda998x: correct PLL divider calculation drm/i2c: tda998x: get rid of private fill_modes function drm/i2c: tda998x: move mode_valid() to bridge drm/i2c: tda998x: register bridge outside of component helper drm/i2c: tda998x: cleanup from previous changes drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() drm/i2c: tda998x: convert to bridge driver drm/scheduler: fix timeout worker setup for out of order job completions drm/amd/display: display connected to dp-1 does not light up drm/amd/display: update clk for various HDMI color depths drm/amd/display: program display clock on cache match drm/amd/display: Add NULL check for enabling dp ss drm/amd/display: add vbios table check for enabling dp ss drm/amd/display: Don't share clk source between DP and HDMI drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo drm/amd/display: Use calculated disp_clk_khz value for dce110 drm/amd/display: Implement custom degamma lut on dcn drm/amd/display: Destroy aux_engines only once ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt6
-rw-r--r--Documentation/devicetree/bindings/display/ilitek,ili9341.txt27
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt2
-rw-r--r--Documentation/devicetree/bindings/display/msm/dpu.txt131
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi.txt16
-rw-r--r--Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt29
-rw-r--r--Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt28
-rw-r--r--Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt8
-rw-r--r--Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt13
-rw-r--r--Documentation/devicetree/bindings/display/panel/edt,et-series.txt39
-rw-r--r--Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt10
-rw-r--r--Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt10
-rw-r--r--Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt20
-rw-r--r--Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt12
-rw-r--r--Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt24
-rw-r--r--Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt20
-rw-r--r--Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt22
-rw-r--r--Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt (renamed from Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt)4
-rw-r--r--Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt25
-rw-r--r--Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt12
-rw-r--r--Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt64
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt4
-rw-r--r--Documentation/driver-api/dma-buf.rst6
-rw-r--r--Documentation/fb/fbcon.txt7
-rw-r--r--Documentation/gpu/amdgpu.rst129
-rw-r--r--Documentation/gpu/drivers.rst1
-rw-r--r--Documentation/gpu/drm-client.rst12
-rw-r--r--Documentation/gpu/drm-kms-helpers.rst26
-rw-r--r--Documentation/gpu/drm-kms.rst28
-rw-r--r--Documentation/gpu/drm-mm.rst20
-rw-r--r--Documentation/gpu/index.rst1
-rw-r--r--Documentation/gpu/kms-properties.csv1
-rw-r--r--Documentation/gpu/msm-crash-dump.rst96
-rw-r--r--Documentation/gpu/v3d.rst28
-rw-r--r--Documentation/locking/ww-mutex-design.txt65
35 files changed, 896 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index 284e2b14cfbe..26649b4c4dd8 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -74,6 +74,12 @@ Required properties for DSI:
The 3 clocks output from the DSI analog PHY: dsi[01]_byte,
dsi[01]_ddr2, and dsi[01]_ddr
+Required properties for the TXP (writeback) block:
+- compatible: Should be "brcm,bcm2835-txp"
+- reg: Physical base address and length of the TXP block's registers
+- interrupts: The interrupt number
+ See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
[1] Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
new file mode 100644
index 000000000000..169b32e4ee4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
@@ -0,0 +1,27 @@
+Ilitek ILI9341 display panels
+
+This binding is for display panels using an Ilitek ILI9341 controller in SPI
+mode.
+
+Required properties:
+- compatible: "adafruit,yx240qv29", "ilitek,ili9341"
+- dc-gpios: D/C pin
+- reset-gpios: Reset pin
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+ display@0{
+ compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ rotation = <270>;
+ backlight = <&backlight>;
+ };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index 383183a89164..8469de510001 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -40,7 +40,7 @@ Required properties (all function blocks):
"mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
"mediatek,<chip>-disp-mutex" - display mutex
"mediatek,<chip>-disp-od" - overdrive
- the supported chips are mt2701 and mt8173.
+ the supported chips are mt2701, mt2712 and mt8173.
- reg: Physical base address and length of the function block register space
- interrupts: The interrupt signal from the function block (required, except for
merge and split function blocks).
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
new file mode 100644
index 000000000000..ad2e8830324e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -0,0 +1,131 @@
+Qualcomm Technologies, Inc. DPU KMS
+
+Description:
+
+Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates
+sub-blocks like DPU display controller, DSI and DP interfaces etc.
+The DPU display controller is found in SDM845 SoC.
+
+MDSS:
+Required properties:
+- compatible: "qcom,sdm845-mdss"
+- reg: physical base address and length of contoller's registers.
+- reg-names: register region names. The following region is required:
+ * "mdss"
+- power-domains: a power domain consumer specifier according to
+ Documentation/devicetree/bindings/power/power_domain.txt
+- clocks: list of clock specifiers for clocks needed by the device.
+- clock-names: device clock names, must be in same order as clocks property.
+ The following clocks are required:
+ * "iface"
+ * "bus"
+ * "core"
+- interrupts: interrupt signal from MDSS.
+- interrupt-controller: identifies the node as an interrupt controller.
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+ source, should be 1.
+- iommus: phandle of iommu device node.
+- #address-cells: number of address cells for the MDSS children. Should be 1.
+- #size-cells: Should be 1.
+- ranges: parent bus address space is the same as the child bus address space.
+
+Optional properties:
+- assigned-clocks: list of clock specifiers for clocks needing rate assignment
+- assigned-clock-rates: list of clock frequencies sorted in the same order as
+ the assigned-clocks property.
+
+MDP:
+Required properties:
+- compatible: "qcom,sdm845-dpu"
+- reg: physical base address and length of controller's registers.
+- reg-names : register region names. The following region is required:
+ * "mdp"
+ * "vbif"
+- clocks: list of clock specifiers for clocks needed by the device.
+- clock-names: device clock names, must be in same order as clocks property.
+ The following clocks are required.
+ * "bus"
+ * "iface"
+ * "core"
+ * "vsync"
+- interrupts: interrupt line from DPU to MDSS.
+- ports: contains the list of output ports from DPU device. These ports connect
+ to interfaces that are external to the DPU hardware, such as DSI, DP etc.
+
+ Each output port contains an endpoint that describes how it is connected to an
+ external interface. These are described by the standard properties documented
+ here:
+ Documentation/devicetree/bindings/graph.txt
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ Port 0 -> DPU_INTF1 (DSI1)
+ Port 1 -> DPU_INTF2 (DSI2)
+
+Optional properties:
+- assigned-clocks: list of clock specifiers for clocks needing rate assignment
+- assigned-clock-rates: list of clock frequencies sorted in the same order as
+ the assigned-clocks property.
+
+Example:
+
+ mdss: mdss@ae00000 {
+ compatible = "qcom,sdm845-mdss";
+ reg = <0xae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&clock_dispcc 0>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_AXI_CLK>,
+ <&clock_dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "core";
+
+ assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>;
+ assigned-clock-rates = <300000000>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_iommu 0>;
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xae00000 0xb2008>;
+
+ mdss_mdp: mdp@ae01000 {
+ compatible = "qcom,sdm845-dpu";
+ reg = <0 0x1000 0x8f000>, <0 0xb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&clock_dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&clock_dispcc DISP_CC_MDSS_AXI_CLK>,
+ <&clock_dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&clock_dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&clock_dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <0 0 300000000 19200000>;
+
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 5eaffca2e28c..dfc743219bd8 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -119,6 +119,20 @@ Required properties:
Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
regulator is wanted.
+- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode
+ panels in microseconds. Driver uses this number to adjust
+ the clock rate according to the expected transfer time.
+ Increasing this value would slow down the mdp processing
+ and can result in slower performance.
+ Decreasing this value can speed up the mdp processing,
+ but this can also impact power consumption.
+ As a rule this time should not be higher than the time
+ that would be expected with the processing at the
+ dsi link rate since anyways this would be the maximum
+ transfer time that could be achieved.
+ If ping pong split is enabled, this time should not be higher
+ than two times the dsi link rate time.
+ If the property is not specified, then the default value is 14000 us.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/graph.txt
@@ -169,6 +183,8 @@ Example:
qcom,master-dsi;
qcom,sync-dual-dsi;
+ qcom,mdss-mdp-transfer-time-us = <12000>;
+
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dsi_active>;
pinctrl-1 = <&dsi_suspend>;
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
new file mode 100644
index 000000000000..49e4105378f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,g070vvn01.txt
@@ -0,0 +1,29 @@
+AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g070vvn01"
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: single regulator to provide the supply voltage
+
+Required nodes:
+- port: Parallel port mapping to connect this display
+
+This panel needs single power supply voltage. Its backlight is conntrolled
+via PWM signal.
+
+Example:
+--------
+
+Example device-tree definition when connected to iMX6Q based board
+
+ lcd_panel: lcd-panel {
+ compatible = "auo,g070vvn01";
+ backlight = <&backlight_lcd>;
+ power-supply = <&reg_display>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt
new file mode 100644
index 000000000000..55183d360032
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,hv070wsa-100.txt
@@ -0,0 +1,28 @@
+BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,hv070wsa-100"
+- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
+- enable-gpios: GPIO pin to enable and disable panel (active high)
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [1]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ panel: panel {
+ compatible = "boe,hv070wsa-100";
+ power-supply = <&vcc_3v3_reg>;
+ enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+ port {
+ panel_ep: endpoint {
+ remote-endpoint = <&bridge_out_ep>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt
new file mode 100644
index 000000000000..897085ee3cd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/dataimage,scf0700c48ggu18.txt
@@ -0,0 +1,8 @@
+DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
+
+Required properties:
+- compatible: should be "dataimage,scf0700c48ggu18"
+- power-supply: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt
new file mode 100644
index 000000000000..bf06bb025b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.txt
@@ -0,0 +1,13 @@
+DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "dlc,dlc0700yzg-1"
+- power-supply: See simple-panel.txt
+
+Optional properties:
+- reset-gpios: See panel-common.txt
+- enable-gpios: See simple-panel.txt
+- backlight: See simple-panel.txt
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/edt,et-series.txt b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt
new file mode 100644
index 000000000000..f56b99ebd9be
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/edt,et-series.txt
@@ -0,0 +1,39 @@
+Emerging Display Technology Corp. Displays
+==========================================
+
+
+Display bindings for EDT Display Technology Corp. Displays which are
+compatible with the simple-panel binding, which is specified in
+simple-panel.txt
+
+
+5,7" WVGA TFT Panels
+--------------------
+
++-----------------+---------------------+-------------------------------------+
+| Identifier | compatbile | description |
++=================+=====================+=====================================+
+| ET057090DHU | edt,et057090dhu | 5.7" VGA TFT LCD panel |
++-----------------+---------------------+-------------------------------------+
+
+
+7,0" WVGA TFT Panels
+--------------------
+
++-----------------+---------------------+-------------------------------------+
+| Identifier | compatbile | description |
++=================+=====================+=====================================+
+| ETM0700G0DH6 | edt,etm070080dh6 | WVGA TFT Display with capacitive |
+| | | Touchscreen |
++-----------------+---------------------+-------------------------------------+
+| ETM0700G0BDH6 | edt,etm070080bdh6 | Same as ETM0700G0DH6 but with |
+| | | inverted pixel clock. |
++-----------------+---------------------+-------------------------------------+
+| ETM0700G0EDH6 | edt,etm070080edh6 | Same display as the ETM0700G0BDH6, |
+| | | but with changed Hardware for the |
+| | | backlight and the touch interface |
++-----------------+---------------------+-------------------------------------+
+| ET070080DH6 | edt,etm070080dh6 | Same timings as the ETM0700G0DH6, |
+| | | but with resistive touch. |
++-----------------+---------------------+-------------------------------------+
+
diff --git a/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt b/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt
deleted file mode 100644
index 20cb38e836e4..000000000000
--- a/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "edt,et070080dh6"
-
-This panel is the same as ETM0700G0DH6 except for the touchscreen.
-ET070080DH6 is the model with resistive touch.
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt b/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt
deleted file mode 100644
index ee4b18053e40..000000000000
--- a/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "edt,etm0700g0dh6"
-
-This panel is the same as ET070080DH6 except for the touchscreen.
-ETM0700G0DH6 is the model with capacitive multitouch.
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
new file mode 100644
index 000000000000..4a041acb4e18
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.txt
@@ -0,0 +1,20 @@
+Ilitek ILI9881c based MIPI-DSI panels
+
+Required properties:
+ - compatible: must be "ilitek,ili9881c" and one of:
+ * "bananapi,lhr050h41"
+ - reg: DSI virtual channel used by that screen
+ - power-supply: phandle to the power regulator
+ - reset-gpios: a GPIO phandle for the reset pin
+
+Optional properties:
+ - backlight: phandle to the backlight used
+
+Example:
+panel@0 {
+ compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+ reg = <0>;
+ power-supply = <&reg_display>;
+ reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+ backlight = <&pwm_bl>;
+};
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt
new file mode 100644
index 000000000000..7c234cf68e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,g070y2-l01.txt
@@ -0,0 +1,12 @@
+Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g070y2-l01"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
new file mode 100644
index 000000000000..595d9dfeffd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
@@ -0,0 +1,24 @@
+Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p097pfg"
+- reg: DSI virtual channel of the peripheral
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ &mipi_dsi {
+ panel {
+ compatible = "innolux,p079zca";
+ reg = <0>;
+ avdd-supply = <...>;
+ avee-supply = <...>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
new file mode 100644
index 000000000000..a9b35265fa13
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
@@ -0,0 +1,20 @@
+Innolux TV123WAM 12.3 inch eDP 2K display panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "innolux,tv123wam"
+- power-supply: regulator to provide the supply voltage
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+ panel_edp: panel-edp {
+ compatible = "innolux,tv123wam";
+ enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
+ power-supply = <&pm8916_l2>;
+ backlight = <&backlight>;
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt
new file mode 100644
index 000000000000..164a5fa236da
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt
@@ -0,0 +1,22 @@
+Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "kingdisplay,kd097d04"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ &mipi_dsi {
+ panel {
+ compatible = "kingdisplay,kd097d04";
+ reg = <0>;
+ power-supply = <...>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt b/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt
index 4903d7b1d947..e78292b1a131 100644
--- a/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt
+++ b/Documentation/devicetree/bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt
@@ -1,7 +1,7 @@
-Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+Newhaven Display International 480 x 272 TFT LCD panel
Required properties:
-- compatible: should be "edt,et057090dhu"
+- compatible: should be "newhaven,nhd-4.3-480272ef-atxl"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt
new file mode 100644
index 000000000000..eb1fb9f8d1f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt
@@ -0,0 +1,25 @@
+Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "rocktech,rk070er9427"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LCD panel input.
+
+Example:
+ panel {
+ compatible = "rocktech,rk070er9427";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
new file mode 100644
index 000000000000..0753f6967279
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
@@ -0,0 +1,12 @@
+Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq035q7db03"
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index 3346c1e2a7a0..f8773ecb7525 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -103,6 +103,7 @@ Required properties:
- compatible: value must be one of:
* allwinner,sun8i-a83t-hdmi-phy
* allwinner,sun8i-h3-hdmi-phy
+ * allwinner,sun50i-a64-hdmi-phy
- reg: base address and size of memory-mapped region
- clocks: phandles to the clocks feeding the HDMI PHY
* bus: the HDMI PHY interface clock
@@ -111,8 +112,9 @@ Required properties:
- resets: phandle to the reset controller driving the PHY
- reset-names: must be "phy"
-H3 HDMI PHY requires additional clock:
+H3 and A64 HDMI PHY require additional clocks:
- pll-0: parent of phy clock
+ - pll-1: second possible phy clock parent (A64 only)
TV Encoder
----------
@@ -145,6 +147,7 @@ Required properties:
* allwinner,sun8i-a33-tcon
* allwinner,sun8i-a83t-tcon-lcd
* allwinner,sun8i-a83t-tcon-tv
+ * allwinner,sun8i-r40-tcon-tv
* allwinner,sun8i-v3s-tcon
* allwinner,sun9i-a80-tcon-lcd
* allwinner,sun9i-a80-tcon-tv
@@ -179,7 +182,7 @@ For TCONs with channel 0, there is one more clock required:
For TCONs with channel 1, there is one more clock required:
- 'tcon-ch1': The clock driving the TCON channel 1
-When TCON support LVDS (all TCONs except TV TCON on A83T and those found
+When TCON support LVDS (all TCONs except TV TCONs on A83T, R40 and those found
in A13, H3, H5 and V3s SoCs), you need one more reset line:
- 'lvds': The reset line driving the LVDS logic
@@ -187,6 +190,62 @@ And on the A23, A31, A31s and A33, you need one more clock line:
- 'lvds-alt': An alternative clock source, separate from the TCON channel 0
clock, that can be used to drive the LVDS clock
+TCON TOP
+--------
+
+TCON TOPs main purpose is to configure whole display pipeline. It determines
+relationships between mixers and TCONs, selects source TCON for HDMI, muxes
+LCD and TV encoder GPIO output, selects TV encoder clock source and contains
+additional TV TCON and DSI gates.
+
+It allows display pipeline to be configured in very different ways:
+
+ / LCD0/LVDS0
+ / [0] TCON-LCD0
+ | \ MIPI DSI
+ mixer0 |
+ \ / [1] TCON-LCD1 - LCD1/LVDS1
+ TCON-TOP
+ / \ [2] TCON-TV0 [0] - TVE0/RGB
+ mixer1 | \
+ | TCON-TOP - HDMI
+ | /
+ \ [3] TCON-TV1 [1] - TVE1/RGB
+
+Note that both TCON TOP references same physical unit. Both mixers can be
+connected to any TCON.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun8i-r40-tcon-top
+ - reg: base address and size of the memory-mapped region.
+ - clocks: phandle to the clocks feeding the TCON TOP
+ * bus: TCON TOP interface clock
+ * tcon-tv0: TCON TV0 clock
+ * tve0: TVE0 clock
+ * tcon-tv1: TCON TV1 clock
+ * tve1: TVE0 clock
+ * dsi: MIPI DSI clock
+ - clock-names: clock name mentioned above
+ - resets: phandle to the reset line driving the TCON TOP
+ - #clock-cells : must contain 1
+ - clock-output-names: Names of clocks created for TCON TV0 channel clock,
+ TCON TV1 channel clock and DSI channel clock, in that order.
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should
+ be defined:
+ * port 0 is input for mixer0 mux
+ * port 1 is output for mixer0 mux
+ * port 2 is input for mixer1 mux
+ * port 3 is output for mixer1 mux
+ * port 4 is input for HDMI mux
+ * port 5 is output for HDMI mux
+ All output endpoints for mixer muxes and input endpoints for HDMI mux should
+ have reg property with the id of the target TCON, as shown in above graph
+ (0-3 for mixer muxes and 0-1 for HDMI mux). All ports should have only one
+ endpoint connected to remote endpoint.
+
DRC
---
@@ -341,6 +400,7 @@ Required properties:
* allwinner,sun8i-a33-display-engine
* allwinner,sun8i-a83t-display-engine
* allwinner,sun8i-h3-display-engine
+ * allwinner,sun8i-r40-display-engine
* allwinner,sun8i-v3s-display-engine
* allwinner,sun9i-a80-display-engine
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 41f0b97eb933..f32b79814dd7 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -8,6 +8,7 @@ abracon Abracon Corporation
actions Actions Semiconductor Co., Ltd.
active-semi Active-Semi International Inc
ad Avionic Design GmbH
+adafruit Adafruit Industries, LLC
adapteva Adapteva, Inc.
adaptrum Adaptrum, Inc.
adh AD Holdings Plc.
@@ -87,6 +88,7 @@ cubietech Cubietech, Ltd.
cypress Cypress Semiconductor Corporation
cznic CZ.NIC, z.s.p.o.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
+dataimage DataImage, Inc.
davicom DAVICOM Semiconductor, Inc.
delta Delta Electronics, Inc.
denx Denx Software Engineering
@@ -95,6 +97,7 @@ dh DH electronics GmbH
digi Digi International Inc.
digilent Diglent, Inc.
dioo Dioo Microcircuit Co., Ltd
+dlc DLC Display Co., Ltd.
dlg Dialog Semiconductor
dlink D-Link Corporation
dmo Data Modul AG
@@ -190,6 +193,7 @@ keymile Keymile GmbH
khadas Khadas
kiebackpeter Kieback & Peter GmbH
kinetic Kinetic Technologies
+kingdisplay King & Display Technology Co., Ltd.
kingnovel Kingnovel Technology Co., Ltd.
koe Kaohsiung Opto-Electronics Inc.
kosagi Sutajio Ko-Usagi PTE Ltd.
diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
index dc384f2f7f34..b541e97c7ab1 100644
--- a/Documentation/driver-api/dma-buf.rst
+++ b/Documentation/driver-api/dma-buf.rst
@@ -131,6 +131,12 @@ DMA Fences
----------
.. kernel-doc:: drivers/dma-buf/dma-fence.c
+ :doc: DMA fences overview
+
+DMA Fences Functions Reference
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/dma-buf/dma-fence.c
:export:
.. kernel-doc:: include/linux/dma-fence.h
diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt
index 79c22d096bbc..d4d642e1ce9c 100644
--- a/Documentation/fb/fbcon.txt
+++ b/Documentation/fb/fbcon.txt
@@ -155,6 +155,13 @@ C. Boot options
used by text. By default, this area will be black. The 'color' value
is an integer number that depends on the framebuffer driver being used.
+6. fbcon=nodefer
+
+ If the kernel is compiled with deferred fbcon takeover support, normally
+ the framebuffer contents, left in place by the firmware/bootloader, will
+ be preserved until there actually is some text is output to the console.
+ This option causes fbcon to bind immediately to the fbdev device.
+
C. Attaching, Detaching and Unloading
Before going on how to attach, detach and unload the framebuffer console, an
diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst
new file mode 100644
index 000000000000..a740e491dfcc
--- /dev/null
+++ b/Documentation/gpu/amdgpu.rst
@@ -0,0 +1,129 @@
+=========================
+ drm/amdgpu AMDgpu driver
+=========================
+
+The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core
+Next (GCN) architecture.
+
+Module Parameters
+=================
+
+The amdgpu driver supports the following module parameters:
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+
+Core Driver Infrastructure
+==========================
+
+This section covers core driver infrastructure.
+
+.. _amdgpu_memory_domains:
+
+Memory Domains
+--------------
+
+.. kernel-doc:: include/uapi/drm/amdgpu_drm.h
+ :doc: memory domains
+
+Buffer Objects
+--------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+ :doc: amdgpu_object
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+ :internal:
+
+PRIME Buffer Sharing
+--------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c
+ :doc: PRIME Buffer Sharing
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c
+ :internal:
+
+MMU Notifier
+------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c
+ :doc: MMU Notifier
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c
+ :internal:
+
+AMDGPU Virtual Memory
+---------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+ :doc: GPUVM
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+ :internal:
+
+Interrupt Handling
+------------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+ :doc: Interrupt Handling
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+ :internal:
+
+GPU Power/Thermal Controls and Monitoring
+=========================================
+
+This section covers hwmon and power/thermal controls.
+
+HWMON Interfaces
+----------------
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: hwmon
+
+GPU sysfs Power State Interfaces
+--------------------------------
+
+GPU power controls are exposed via sysfs files.
+
+power_dpm_state
+~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: power_dpm_state
+
+power_dpm_force_performance_level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: power_dpm_force_performance_level
+
+pp_table
+~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: pp_table
+
+pp_od_clk_voltage
+~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: pp_od_clk_voltage
+
+pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie
+
+pp_power_profile_mode
+~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: pp_power_profile_mode
+
+busy_percent
+~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+ :doc: busy_percent
diff --git a/Documentation/gpu/drivers.rst b/Documentation/gpu/drivers.rst
index f982558fc25d..65be325bf282 100644
--- a/Documentation/gpu/drivers.rst
+++ b/Documentation/gpu/drivers.rst
@@ -4,6 +4,7 @@ GPU Driver Documentation
.. toctree::
+ amdgpu
i915
meson
pl111
diff --git a/Documentation/gpu/drm-client.rst b/Documentation/gpu/drm-client.rst
new file mode 100644
index 000000000000..7e672063e7eb
--- /dev/null
+++ b/Documentation/gpu/drm-client.rst
@@ -0,0 +1,12 @@
+=================
+Kernel clients
+=================
+
+.. kernel-doc:: drivers/gpu/drm/drm_client.c
+ :doc: overview
+
+.. kernel-doc:: include/drm/drm_client.h
+ :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_client.c
+ :export:
diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
index e37557b30f62..f9cfcdcdf024 100644
--- a/Documentation/gpu/drm-kms-helpers.rst
+++ b/Documentation/gpu/drm-kms-helpers.rst
@@ -109,6 +109,15 @@ Framebuffer CMA Helper Functions Reference
.. _drm_bridges:
+Framebuffer GEM Helper Reference
+================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_gem_framebuffer_helper.c
+ :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/drm_gem_framebuffer_helper.c
+ :export:
+
Bridges
=======
@@ -169,6 +178,15 @@ Display Port Helper Functions Reference
.. kernel-doc:: drivers/gpu/drm/drm_dp_helper.c
:export:
+Display Port CEC Helper Functions Reference
+===========================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_dp_cec.c
+ :doc: dp cec helpers
+
+.. kernel-doc:: drivers/gpu/drm/drm_dp_cec.c
+ :export:
+
Display Port Dual Mode Adaptor Helper Functions Reference
=========================================================
@@ -282,13 +300,13 @@ Auxiliary Modeset Helpers
.. kernel-doc:: drivers/gpu/drm/drm_modeset_helper.c
:export:
-Framebuffer GEM Helper Reference
-================================
+OF/DT Helpers
+=============
-.. kernel-doc:: drivers/gpu/drm/drm_gem_framebuffer_helper.c
+.. kernel-doc:: drivers/gpu/drm/drm_of.c
:doc: overview
-.. kernel-doc:: drivers/gpu/drm/drm_gem_framebuffer_helper.c
+.. kernel-doc:: drivers/gpu/drm/drm_of.c
:export:
Legacy Plane Helper Reference
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index 1dffd1ac4cd4..5dee6b8a4c12 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -56,11 +56,12 @@ Overview
The basic object structure KMS presents to userspace is fairly simple.
Framebuffers (represented by :c:type:`struct drm_framebuffer <drm_framebuffer>`,
-see `Frame Buffer Abstraction`_) feed into planes. One or more (or even no)
-planes feed their pixel data into a CRTC (represented by :c:type:`struct
-drm_crtc <drm_crtc>`, see `CRTC Abstraction`_) for blending. The precise
-blending step is explained in more detail in `Plane Composition Properties`_ and
-related chapters.
+see `Frame Buffer Abstraction`_) feed into planes. Planes are represented by
+:c:type:`struct drm_plane <drm_plane>`, see `Plane Abstraction`_ for more
+details. One or more (or even no) planes feed their pixel data into a CRTC
+(represented by :c:type:`struct drm_crtc <drm_crtc>`, see `CRTC Abstraction`_)
+for blending. The precise blending step is explained in more detail in `Plane
+Composition Properties`_ and related chapters.
For the output routing the first step is encoders (represented by
:c:type:`struct drm_encoder <drm_encoder>`, see `Encoder Abstraction`_). Those
@@ -373,6 +374,15 @@ Connector Functions Reference
.. kernel-doc:: drivers/gpu/drm/drm_connector.c
:export:
+Writeback Connectors
+--------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_writeback.c
+ :doc: overview
+
+.. kernel-doc:: drivers/gpu/drm/drm_writeback.c
+ :export:
+
Encoder Abstraction
===================
@@ -457,7 +467,7 @@ Output discovery and initialization example
drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC);
- drm_mode_connector_attach_encoder(&intel_output->base,
+ drm_connector_attach_encoder(&intel_output->base,
&intel_output->enc);
/* Set up the DDC bus. */
@@ -517,6 +527,12 @@ Standard Connector Properties
.. kernel-doc:: drivers/gpu/drm/drm_connector.c
:doc: standard connector properties
+HDMI Specific Connector Properties
+----------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+ :doc: HDMI connector properties
+
Plane Composition Properties
----------------------------
diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst
index b08e9dcd9177..21b6b72a9ba8 100644
--- a/Documentation/gpu/drm-mm.rst
+++ b/Documentation/gpu/drm-mm.rst
@@ -395,6 +395,8 @@ VMA Offset Manager
.. kernel-doc:: drivers/gpu/drm/drm_vma_manager.c
:export:
+.. _prime_buffer_sharing:
+
PRIME Buffer Sharing
====================
@@ -496,3 +498,21 @@ DRM Sync Objects
.. kernel-doc:: drivers/gpu/drm/drm_syncobj.c
:export:
+
+GPU Scheduler
+=============
+
+Overview
+--------
+
+.. kernel-doc:: drivers/gpu/drm/scheduler/gpu_scheduler.c
+ :doc: Overview
+
+Scheduler Function References
+-----------------------------
+
+.. kernel-doc:: include/drm/gpu_scheduler.h
+ :internal:
+
+.. kernel-doc:: drivers/gpu/drm/scheduler/gpu_scheduler.c
+ :export:
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst
index 00288f34c5a6..1fcf8e851e15 100644
--- a/Documentation/gpu/index.rst
+++ b/Documentation/gpu/index.rst
@@ -10,6 +10,7 @@ Linux GPU Driver Developer's Guide
drm-kms
drm-kms-helpers
drm-uapi
+ drm-client
drivers
vga-switcheroo
vgaarbiter
diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv
index 07ed22ea3bd6..bfde04eddd14 100644
--- a/Documentation/gpu/kms-properties.csv
+++ b/Documentation/gpu/kms-properties.csv
@@ -17,6 +17,7 @@ Owner Module/Drivers,Group,Property Name,Type,Property Values,Object attached,De
,Virtual GPU,“suggested X”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an X offset for a connector
,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an Y offset for a connector
,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" }",Connector,TDB
+,Optional,"""content type""",ENUM,"{ ""No Data"", ""Graphics"", ""Photo"", ""Cinema"", ""Game"" }",Connector,TBD
i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normaly in the range 0..1.0 are remapped to the range 16/255..235/255."
,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD
,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD
diff --git a/Documentation/gpu/msm-crash-dump.rst b/Documentation/gpu/msm-crash-dump.rst
new file mode 100644
index 000000000000..757cd257e0d8
--- /dev/null
+++ b/Documentation/gpu/msm-crash-dump.rst
@@ -0,0 +1,96 @@
+=====================
+MSM Crash Dump Format
+=====================
+
+Following a GPU hang the MSM driver outputs debugging information via
+/sys/kernel/dri/X/show or via devcoredump (/sys/class/devcoredump/dcdX/data).
+This document describes how the output is formatted.
+
+Each entry is in the form key: value. Sections headers will not have a value
+and all the contents of a section will be indented two spaces from the header.
+Each section might have multiple array entries the start of which is designated
+by a (-).
+
+Mappings
+--------
+
+kernel
+ The kernel version that generated the dump (UTS_RELEASE).
+
+module
+ The module that generated the crashdump.
+
+time
+ The kernel time at crash formated as seconds.microseconds.
+
+comm
+ Comm string for the binary that generated the fault.
+
+cmdline
+ Command line for the binary that generated the fault.
+
+revision
+ ID of the GPU that generated the crash formatted as
+ core.major.minor.patchlevel separated by dots.
+
+rbbm-status
+ The current value of RBBM_STATUS which shows what top level GPU
+ components are in use at the time of crash.
+
+ringbuffer
+ Section containing the contents of each ringbuffer. Each ringbuffer is
+ identified with an id number.
+
+ id
+ Ringbuffer ID (0 based index). Each ringbuffer in the section
+ will have its own unique id.
+ iova
+ GPU address of the ringbuffer.
+
+ last-fence
+ The last fence that was issued on the ringbuffer
+
+ retired-fence
+ The last fence retired on the ringbuffer.
+
+ rptr
+ The current read pointer (rptr) for the ringbuffer.
+
+ wptr
+ The current write pointer (wptr) for the ringbuffer.
+
+ size
+ Maximum size of the ringbuffer programmed in the hardware.
+
+ data
+ The contents of the ring encoded as ascii85. Only the used
+ portions of the ring will be printed.
+
+bo
+ List of buffers from the hanging submission if available.
+ Each buffer object will have a uinque iova.
+
+ iova
+ GPU address of the buffer object.
+
+ size
+ Allocated size of the buffer object.
+
+ data
+ The contents of the buffer object encoded with ascii85. Only
+ Trailing zeros at the end of the buffer will be skipped.
+
+registers
+ Set of registers values. Each entry is on its own line enclosed
+ by brackets { }.
+
+ offset
+ Byte offset of the register from the start of the
+ GPU memory region.
+
+ value
+ Hexadecimal value of the register.
+
+registers-hlsq
+ (5xx only) Register values from the HLSQ aperture.
+ Same format as the register section.
diff --git a/Documentation/gpu/v3d.rst b/Documentation/gpu/v3d.rst
new file mode 100644
index 000000000000..543f7fbf526e
--- /dev/null
+++ b/Documentation/gpu/v3d.rst
@@ -0,0 +1,28 @@
+=====================================
+ drm/v3d Broadcom V3D Graphics Driver
+=====================================
+
+.. kernel-doc:: drivers/gpu/drm/v3d/v3d_drv.c
+ :doc: Broadcom V3D Graphics Driver
+
+GPU buffer object (BO) management
+---------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/v3d/v3d_bo.c
+ :doc: V3D GEM BO management support
+
+Address space management
+===========================================
+.. kernel-doc:: drivers/gpu/drm/v3d/v3d_mmu.c
+ :doc: Broadcom V3D MMU
+
+GPU Scheduling
+===========================================
+.. kernel-doc:: drivers/gpu/drm/v3d/v3d_sched.c
+ :doc: Broadcom V3D scheduling
+
+Interrupts
+--------------
+
+.. kernel-doc:: drivers/gpu/drm/v3d/v3d_irq.c
+ :doc: Interrupt management for the V3D engine
diff --git a/Documentation/locking/ww-mutex-design.txt b/Documentation/locking/ww-mutex-design.txt
index 34c3a1b50b9a..f0ed7c30e695 100644
--- a/Documentation/locking/ww-mutex-design.txt
+++ b/Documentation/locking/ww-mutex-design.txt
@@ -1,4 +1,4 @@
-Wait/Wound Deadlock-Proof Mutex Design
+Wound/Wait Deadlock-Proof Mutex Design
======================================
Please read mutex-design.txt first, as it applies to wait/wound mutexes too.
@@ -32,10 +32,26 @@ the oldest task) wins, and the one with the higher reservation id (i.e. the
younger task) unlocks all of the buffers that it has already locked, and then
tries again.
-In the RDBMS literature this deadlock handling approach is called wait/wound:
-The older tasks waits until it can acquire the contended lock. The younger tasks
-needs to back off and drop all the locks it is currently holding, i.e. the
-younger task is wounded.
+In the RDBMS literature, a reservation ticket is associated with a transaction.
+and the deadlock handling approach is called Wait-Die. The name is based on
+the actions of a locking thread when it encounters an already locked mutex.
+If the transaction holding the lock is younger, the locking transaction waits.
+If the transaction holding the lock is older, the locking transaction backs off
+and dies. Hence Wait-Die.
+There is also another algorithm called Wound-Wait:
+If the transaction holding the lock is younger, the locking transaction
+wounds the transaction holding the lock, requesting it to die.
+If the transaction holding the lock is older, it waits for the other
+transaction. Hence Wound-Wait.
+The two algorithms are both fair in that a transaction will eventually succeed.
+However, the Wound-Wait algorithm is typically stated to generate fewer backoffs
+compared to Wait-Die, but is, on the other hand, associated with more work than
+Wait-Die when recovering from a backoff. Wound-Wait is also a preemptive
+algorithm in that transactions are wounded by other transactions, and that
+requires a reliable way to pick up up the wounded condition and preempt the
+running transaction. Note that this is not the same as process preemption. A
+Wound-Wait transaction is considered preempted when it dies (returning
+-EDEADLK) following a wound.
Concepts
--------
@@ -47,18 +63,20 @@ Acquire context: To ensure eventual forward progress it is important the a task
trying to acquire locks doesn't grab a new reservation id, but keeps the one it
acquired when starting the lock acquisition. This ticket is stored in the
acquire context. Furthermore the acquire context keeps track of debugging state
-to catch w/w mutex interface abuse.
+to catch w/w mutex interface abuse. An acquire context is representing a
+transaction.
W/w class: In contrast to normal mutexes the lock class needs to be explicit for
-w/w mutexes, since it is required to initialize the acquire context.
+w/w mutexes, since it is required to initialize the acquire context. The lock
+class also specifies what algorithm to use, Wound-Wait or Wait-Die.
Furthermore there are three different class of w/w lock acquire functions:
* Normal lock acquisition with a context, using ww_mutex_lock.
-* Slowpath lock acquisition on the contending lock, used by the wounded task
- after having dropped all already acquired locks. These functions have the
- _slow postfix.
+* Slowpath lock acquisition on the contending lock, used by the task that just
+ killed its transaction after having dropped all already acquired locks.
+ These functions have the _slow postfix.
From a simple semantics point-of-view the _slow functions are not strictly
required, since simply calling the normal ww_mutex_lock functions on the
@@ -90,6 +108,12 @@ provided.
Usage
-----
+The algorithm (Wait-Die vs Wound-Wait) is chosen by using either
+DEFINE_WW_CLASS() (Wound-Wait) or DEFINE_WD_CLASS() (Wait-Die)
+As a rough rule of thumb, use Wound-Wait iff you
+expect the number of simultaneous competing transactions to be typically small,
+and you want to reduce the number of rollbacks.
+
Three different ways to acquire locks within the same w/w class. Common
definitions for methods #1 and #2:
@@ -220,7 +244,7 @@ mutexes are a natural fit for such a case for two reasons:
Note that this approach differs in two important ways from the above methods:
- Since the list of objects is dynamically constructed (and might very well be
- different when retrying due to hitting the -EDEADLK wound condition) there's
+ different when retrying due to hitting the -EDEADLK die condition) there's
no need to keep any object on a persistent list when it's not locked. We can
therefore move the list_head into the object itself.
- On the other hand the dynamic object list construction also means that the -EALREADY return
@@ -312,12 +336,23 @@ Design:
We maintain the following invariants for the wait list:
(1) Waiters with an acquire context are sorted by stamp order; waiters
without an acquire context are interspersed in FIFO order.
- (2) Among waiters with contexts, only the first one can have other locks
- acquired already (ctx->acquired > 0). Note that this waiter may come
- after other waiters without contexts in the list.
+ (2) For Wait-Die, among waiters with contexts, only the first one can have
+ other locks acquired already (ctx->acquired > 0). Note that this waiter
+ may come after other waiters without contexts in the list.
+
+ The Wound-Wait preemption is implemented with a lazy-preemption scheme:
+ The wounded status of the transaction is checked only when there is
+ contention for a new lock and hence a true chance of deadlock. In that
+ situation, if the transaction is wounded, it backs off, clears the
+ wounded status and retries. A great benefit of implementing preemption in
+ this way is that the wounded transaction can identify a contending lock to
+ wait for before restarting the transaction. Just blindly restarting the
+ transaction would likely make the transaction end up in a situation where
+ it would have to back off again.
In general, not much contention is expected. The locks are typically used to
- serialize access to resources for devices.
+ serialize access to resources for devices, and optimization focus should
+ therefore be directed towards the uncontended cases.
Lockdep:
Special care has been taken to warn for as many cases of api abuse