diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-03 19:30:59 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-08-03 19:30:59 -0700 |
commit | 822ef14e9dc73079c646d33aa77e2ac42361b39e (patch) | |
tree | 34a8f741f64ef1e617575204db81aa6484df55ac /Documentation | |
parent | 6ce076f4159fcf7436cce1299b05eabe200592f4 (diff) | |
parent | d76cfc7c3ad23a79eaf348a1b483e89f8ac3041a (diff) | |
download | linux-822ef14e9dc73079c646d33aa77e2ac42361b39e.tar.bz2 |
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
Diffstat (limited to 'Documentation')
13 files changed, 379 insertions, 227 deletions
diff --git a/Documentation/ABI/testing/debugfs-turris-mox-rwtm b/Documentation/ABI/testing/debugfs-turris-mox-rwtm new file mode 100644 index 000000000000..2b3255ee68fd --- /dev/null +++ b/Documentation/ABI/testing/debugfs-turris-mox-rwtm @@ -0,0 +1,9 @@ +What: /sys/kernel/debug/turris-mox-rwtm/do_sign +Date: Jun 2020 +KernelVersion: 5.8 +Contact: Marek Behún <marek.behun@nic.cz> +Description: (W) Message to sign with the ECDSA private key stored in + device's OTP. The message must be exactly 64 bytes (since + this is intended for SHA-512 hashes). + (R) The resulting signature, 136 bytes. This contains the R and + S values of the ECDSA signature, both in big-endian format. diff --git a/Documentation/ABI/testing/sysfs-bus-optee-devices b/Documentation/ABI/testing/sysfs-bus-optee-devices new file mode 100644 index 000000000000..0f58701367b6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-optee-devices @@ -0,0 +1,8 @@ +What: /sys/bus/tee/devices/optee-ta-<uuid>/ +Date: May 2020 +KernelVersion 5.8 +Contact: op-tee@lists.trustedfirmware.org +Description: + OP-TEE bus provides reference to registered drivers under this directory. The <uuid> + matches Trusted Application (TA) driver and corresponding TA in secure OS. Drivers + are free to create needed API under optee-ta-<uuid> directory. diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc index ba3a3fac0ee1..ea999e292f11 100644 --- a/Documentation/ABI/testing/sysfs-devices-soc +++ b/Documentation/ABI/testing/sysfs-devices-soc @@ -26,6 +26,30 @@ Description: Read-only attribute common to all SoCs. Contains SoC family name (e.g. DB8500). + On many of ARM based silicon with SMCCC v1.2+ compliant firmware + this will contain the JEDEC JEP106 manufacturer’s identification + code. The format is "jep106:XXYY" where XX is identity code and + YY is continuation code. + + This manufacturer’s identification code is defined by one + or more eight (8) bit fields, each consisting of seven (7) + data bits plus one (1) odd parity bit. It is a single field, + limiting the possible number of vendors to 126. To expand + the maximum number of identification codes, a continuation + scheme has been defined. + + The specified mechanism is that an identity code of 0x7F + represents the "continuation code" and implies the presence + of an additional identity code field, and this mechanism + may be extended to multiple continuation codes followed + by the manufacturer's identity code. + + For example, ARM has identity code 0x7F 0x7F 0x7F 0x7F 0x3B, + which is code 0x3B on the fifth 'page'. This is shortened + as JEP106 identity code of 0x3B and a continuation code of + 0x4 to represent the four continuation codes preceding the + identity code. + What: /sys/devices/socX/serial_number Date: January 2019 contact: Bjorn Andersson <bjorn.andersson@linaro.org> @@ -40,6 +64,12 @@ Description: Read-only attribute supported by most SoCs. In the case of ST-Ericsson's chips this contains the SoC serial number. + On many of ARM based silicon with SMCCC v1.2+ compliant firmware + this will contain the SOC ID appended to the family attribute + to ensure there is no conflict in this namespace across various + vendors. The format is "jep106:XXYY:ZZZZ" where XX is identity + code, YY is continuation code and ZZZZ is the SOC ID. + What: /sys/devices/socX/revision Date: January 2012 contact: Lee Jones <lee.jones@linaro.org> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 354b448fc0c3..78456437df5f 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -11,10 +11,12 @@ Required properties: * "qcom,scm-apq8084" * "qcom,scm-ipq4019" * "qcom,scm-ipq806x" + * "qcom,scm-ipq8074" * "qcom,scm-msm8660" * "qcom,scm-msm8916" * "qcom,scm-msm8960" * "qcom,scm-msm8974" + * "qcom,scm-msm8994" * "qcom,scm-msm8996" * "qcom,scm-msm8998" * "qcom,scm-sc7180" diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt index 1a8718f8855d..178fca08278f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt @@ -55,7 +55,7 @@ Required Properties: corresponds to a range of host irqs. For more details on TISCI IRQ resource management refer: -http://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html +https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html Example: -------- diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt deleted file mode 100644 index 6ed79e60248a..000000000000 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt +++ /dev/null @@ -1,49 +0,0 @@ -Freescale i.MX System Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: Should be "fsl,<chip>-src" -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain SRC interrupt and CPU WDOG interrupt, - in this order. -- #reset-cells: 1, see below - -example: - -src: src@20d8000 { - compatible = "fsl,imx6q-src"; - reg = <0x020d8000 0x4000>; - interrupts = <0 91 0x04 0 96 0x04>; - #reset-cells = <1>; -}; - -Specifying reset lines connected to IP modules -============================================== - -The system reset controller can be used to reset the GPU, VPU, -IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device -nodes should specify the reset line on the SRC in their resets -property, containing a phandle to the SRC device node and a -RESET_INDEX specifying which module to reset, as described in -reset.txt - -example: - - ipu1: ipu@2400000 { - resets = <&src 2>; - }; - ipu2: ipu@2800000 { - resets = <&src 4>; - }; - -The following RESET_INDEX values are valid for i.MX5: -GPU_RESET 0 -VPU_RESET 1 -IPU1_RESET 2 -OPEN_VG_RESET 3 -The following additional RESET_INDEX value is valid for i.MX6: -IPU2_RESET 4 diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml new file mode 100644 index 000000000000..27c5e34a3ac6 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/fsl,imx-src.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX System Reset Controller + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The system reset controller can be used to reset the GPU, VPU, + IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device + nodes should specify the reset line on the SRC in their resets + property, containing a phandle to the SRC device node and a + RESET_INDEX specifying which module to reset, as described in + reset.txt + + The following RESET_INDEX values are valid for i.MX5: + GPU_RESET 0 + VPU_RESET 1 + IPU1_RESET 2 + OPEN_VG_RESET 3 + The following additional RESET_INDEX value is valid for i.MX6: + IPU2_RESET 4 + +properties: + compatible: + oneOf: + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx50-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx53-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6q-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sx-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sl-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6ul-src" + - const: "fsl,imx51-src" + - items: + - const: "fsl,imx6sll-src" + - const: "fsl,imx51-src" + + reg: + maxItems: 1 + + interrupts: + items: + - description: SRC interrupt + - description: CPU WDOG interrupts out of SRC + minItems: 1 + maxItems: 2 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#reset-cells' + +additionalProperties: false + +examples: + - | + reset-controller@73fd0000 { + compatible = "fsl,imx51-src"; + reg = <0x73fd0000 0x4000>; + interrupts = <75>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt deleted file mode 100644 index e10502d9153e..000000000000 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt +++ /dev/null @@ -1,56 +0,0 @@ -Freescale i.MX7 System Reset Controller -====================================== - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: - - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon" - - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon" - - For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon" - - For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon" - - For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon" -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain SRC interrupt -- #reset-cells: 1, see below - -example: - -src: reset-controller@30390000 { - compatible = "fsl,imx7d-src", "syscon"; - reg = <0x30390000 0x2000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - #reset-cells = <1>; -}; - - -Specifying reset lines connected to IP modules -============================================== - -The system reset controller can be used to reset various set of -peripherals. Device nodes that need access to reset lines should -specify them as a reset phandle in their corresponding node as -specified in reset.txt. - -Example: - - pcie: pcie@33800000 { - - ... - - resets = <&src IMX7_RESET_PCIEPHY>, - <&src IMX7_RESET_PCIE_CTRL_APPS_EN>; - reset-names = "pciephy", "apps"; - - ... - }; - - -For list of all valid reset indices see -<dt-bindings/reset/imx7-reset.h> for i.MX7, -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and -<dt-bindings/reset/imx8mp-reset.h> for i.MX8MP diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml new file mode 100644 index 000000000000..b1a71c1bb05b --- /dev/null +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/fsl,imx7-src.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX7 System Reset Controller + +maintainers: + - Andrey Smirnov <andrew.smirnov@gmail.com> + +description: | + The system reset controller can be used to reset various set of + peripherals. Device nodes that need access to reset lines should + specify them as a reset phandle in their corresponding node as + specified in reset.txt. + + For list of all valid reset indices see + <dt-bindings/reset/imx7-reset.h> for i.MX7, + <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ, i.MX8MM and i.MX8MN, + <dt-bindings/reset/imx8mp-reset.h> for i.MX8MP. + +properties: + compatible: + items: + - enum: + - fsl,imx7d-src + - fsl,imx8mq-src + - fsl,imx8mp-src + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + reset-controller@30390000 { + compatible = "fsl,imx7d-src", "syscon"; + reg = <0x30390000 0x2000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt deleted file mode 100644 index 616fddcd09fd..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt +++ /dev/null @@ -1,62 +0,0 @@ -Qualcomm Resource Power Manager (RPM) over SMD - -This driver is used to interface with the Resource Power Manager (RPM) found in -various Qualcomm platforms. The RPM allows each component in the system to vote -for state of the system resources, such as clocks, regulators and bus -frequencies. - -The SMD information for the RPM edge should be filled out. See qcom,smd.txt for -the required edge properties. All SMD related properties will reside within the -RPM node itself. - -= SUBDEVICES - -The RPM exposes resources to its subnodes. The rpm_requests node must be -present and this subnode may contain children that designate regulator -resources. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-apq8084" - "qcom,rpm-msm8916" - "qcom,rpm-msm8974" - "qcom,rpm-msm8976" - "qcom,rpm-msm8998" - "qcom,rpm-sdm660" - "qcom,rpm-qcs404" - -- qcom,smd-channels: - Usage: required - Value type: <string> - Definition: must be "rpm_requests" - -Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt -for information on the regulator subnodes that can exist under the rpm_requests. - -Example: - - soc { - apcs: syscon@f9011000 { - compatible = "syscon"; - reg = <0xf9011000 0x1000>; - }; - }; - - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; - - ... - }; - }; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml new file mode 100644 index 000000000000..468d658ce3e7 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Resource Power Manager (RPM) over SMD + +description: | + This driver is used to interface with the Resource Power Manager (RPM) found + in various Qualcomm platforms. The RPM allows each component in the system + to vote for state of the system resources, such as clocks, regulators and bus + frequencies. + + The SMD information for the RPM edge should be filled out. See qcom,smd.txt + for the required edge properties. All SMD related properties will reside + within the RPM node itself. + + The RPM exposes resources to its subnodes. The rpm_requests node must be + present and this subnode may contain children that designate regulator + resources. + + Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt + for information on the regulator subnodes that can exist under the + rpm_requests. + +maintainers: + - Kathiravan T <kathirav@codeaurora.org> + +properties: + compatible: + enum: + - qcom,rpm-apq8084 + - qcom,rpm-ipq6018 + - qcom,rpm-msm8916 + - qcom,rpm-msm8974 + - qcom,rpm-msm8976 + - qcom,rpm-msm8996 + - qcom,rpm-msm8998 + - qcom,rpm-sdm660 + - qcom,rpm-qcs404 + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the RPM communication + items: + - const: rpm_requests + +if: + properties: + compatible: + contains: + enum: + - qcom,rpm-apq8084 + - qcom,rpm-msm8916 + - qcom,rpm-msm8974 +then: + required: + - qcom,smd-channels + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + /* Regulator nodes to follow */ + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt deleted file mode 100644 index 59758ccce809..000000000000 --- a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Texas Instruments K3 NavigatorSS Ring Accelerator - -The Ring Accelerator (RA) is a machine which converts read/write accesses -from/to a constant address into corresponding read/write accesses from/to a -circular data structure in memory. The RA eliminates the need for each DMA -controller which needs to access ring elements from having to know the current -state of the ring (base address, current offset). The DMA controller -performs a read or write access to a specific address range (which maps to the -source interface on the RA) and the RA replaces the address for the transaction -with a new address which corresponds to the head or tail element of the ring -(head for reads, tail for writes). - -The Ring Accelerator is a hardware module that is responsible for accelerating -management of the packet queues. The K3 SoCs can have more than one RA instances - -Required properties: -- compatible : Must be "ti,am654-navss-ringacc"; -- reg : Should contain register location and length of the following - named register regions. -- reg-names : should be - "rt" - The RA Ring Real-time Control/Status Registers - "fifos" - The RA Queues Registers - "proxy_gcfg" - The RA Proxy Global Config Registers - "proxy_target" - The RA Proxy Datapath Registers -- ti,num-rings : Number of rings supported by RA -- ti,sci-rm-range-gp-rings : TI-SCI RM subtype for GP ring range -- ti,sci : phandle on TI-SCI compatible System controller node -- ti,sci-dev-id : TI-SCI device id of the ring accelerator -- msi-parent : phandle for "ti,sci-inta" interrupt controller - -Optional properties: - -- ti,dma-ring-reset-quirk : enable ringacc / udma ring state interoperability - issue software w/a - -Example: - -ringacc: ringacc@3c000000 { - compatible = "ti,am654-navss-ringacc"; - reg = <0x0 0x3c000000 0x0 0x400000>, - <0x0 0x38000000 0x0 0x400000>, - <0x0 0x31120000 0x0 0x100>, - <0x0 0x33000000 0x0 0x40000>; - reg-names = "rt", "fifos", - "proxy_gcfg", "proxy_target"; - ti,num-rings = <818>; - ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ - ti,dma-ring-reset-quirk; - ti,sci = <&dmsc>; - ti,sci-dev-id = <187>; - msi-parent = <&inta_main_udmass>; -}; - -client: - -dma_ipx: dma_ipx@<addr> { - ... - ti,ringacc = <&ringacc>; - ... -} diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml new file mode 100644 index 000000000000..ae33fc957141 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments K3 NavigatorSS Ring Accelerator + +maintainers: + - Santosh Shilimkar <ssantosh@kernel.org> + - Grygorii Strashko <grygorii.strashko@ti.com> + +description: | + The Ring Accelerator (RA) is a machine which converts read/write accesses + from/to a constant address into corresponding read/write accesses from/to a + circular data structure in memory. The RA eliminates the need for each DMA + controller which needs to access ring elements from having to know the current + state of the ring (base address, current offset). The DMA controller + performs a read or write access to a specific address range (which maps to the + source interface on the RA) and the RA replaces the address for the transaction + with a new address which corresponds to the head or tail element of the ring + (head for reads, tail for writes). + + The Ring Accelerator is a hardware module that is responsible for accelerating + management of the packet queues. The K3 SoCs can have more than one RA instances + +properties: + compatible: + items: + - const: ti,am654-navss-ringacc + + reg: + items: + - description: real time registers regions + - description: fifos registers regions + - description: proxy gcfg registers regions + - description: proxy target registers regions + + reg-names: + items: + - const: rt + - const: fifos + - const: proxy_gcfg + - const: proxy_target + + msi-parent: true + + ti,num-rings: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of rings supported by RA + + ti,sci-rm-range-gp-rings: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TI-SCI RM subtype for GP ring range + + ti,sci: + $ref: /schemas/types.yaml#definitions/phandle-array + description: phandle on TI-SCI compatible System controller node + + ti,sci-dev-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TI-SCI device id of the ring accelerator + + ti,dma-ring-reset-quirk: + $ref: /schemas/types.yaml#definitions/flag + description: | + enable ringacc/udma ring state interoperability issue software w/a + +required: + - compatible + - reg + - reg-names + - msi-parent + - ti,num-rings + - ti,sci-rm-range-gp-rings + - ti,sci + - ti,sci-dev-id + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <818>; + ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ + ti,dma-ring-reset-quirk; + ti,sci = <&dmsc>; + ti,sci-dev-id = <187>; + msi-parent = <&inta_main_udmass>; + }; + }; |