Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "We have a few new features this time, including a new SFI-based
  cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new
  devfreq class for providing its governors with raw utilization data
  and a new ACPI driver for AMD SoCs.

  Still, the majority of changes here are reworks of existing code to
  make it more straightforward or to prepare it for implementing new
  features on top of it.  The primary example is the rework of ACPI
  resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with
  support for IOAPIC hotplug implemented on top of it, but there is
  quite a number of changes of this kind in the cpufreq core, ACPICA,
  ACPI EC driver, ACPI processor driver and the generic power domains
  core code too.

  The most active developer is Viresh Kumar with his cpufreq changes.

  Specifics:

   - Rework of the core ACPI resources parsing code to fix issues in it
     and make using resource offsets more convenient and consolidation
     of some resource-handing code in a couple of places that have grown
     analagous data structures and code to cover the the same gap in the
     core (Jiang Liu, Thomas Gleixner, Lv Zheng).

   - ACPI-based IOAPIC hotplug support on top of the resources handling
     rework (Jiang Liu, Yinghai Lu).

   - ACPICA update to upstream release 20150204 including an interrupt
     handling rework that allows drivers to install raw handlers for
     ACPI GPEs which then become entirely responsible for the given GPE
     and the ACPICA core code won't touch it (Lv Zheng, David E Box,
     Octavian Purdila).

   - ACPI EC driver rework to fix several concurrency issues and other
     problems related to events handling on top of the ACPICA's new
     support for raw GPE handlers (Lv Zheng).

   - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
     Subsystem) driver for Intel chips (Ken Xue).

   - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko
     Nikula).

   - Two new blacklist entries for machines (Samsung 730U3E/740U3E and
     510R) where the native backlight interface doesn't work correctly
     while the ACPI one does (Hans de Goede).

   - Rework of the ACPI processor driver's handling of idle states to
     make the code more straightforward and less bloated overall (Rafael
     J Wysocki).

   - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
     Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei
     Bai).

   - PCI core power management modification to avoid resuming (some)
     runtime-suspended devices during system suspend if they are in the
     right states already (Rafael J Wysocki).

   - New SFI-based cpufreq driver for Intel platforms using SFI
     (Srinidhi Kasagar).

   - cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
     Doug Anderson, Wolfram Sang).

   - SkyLake CPU support and other updates for the intel_pstate driver
     (Kristen Carlson Accardi, Srinivas Pandruvada).

   - cpufreq-dt driver cleanup (Markus Elfring).

   - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).

   - Generic power domains core code fixes and cleanups (Ulf Hansson).

   - Operating Performance Points (OPP) core code cleanups and kernel
     documentation update (Nishanth Menon).

   - New dabugfs interface to make the list of PM QoS constraints
     available to user space (Nishanth Menon).

   - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).

   - New devfreq class (devfreq_event) to provide raw utilization data
     to devfreq governors (Chanwoo Choi).

   - Assorted minor fixes and cleanups related to power management
     (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel
     Machek, Todd E Brandt, Wonhong Kwon).

   - turbostat updates (Len Brown) and cpupower Makefile improvement
     (Sriram Raghunathan)"

* tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits)
  tools/power turbostat: relax dependency on APERF_MSR
  tools/power turbostat: relax dependency on invariant TSC
  Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
  tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
  tools/power turbostat: relax dependency on root permission
  ACPI / video: Add disable_native_backlight quirk for Samsung 510R
  ACPI / PM: Remove unneeded nested #ifdef
  USB / PM: Remove unneeded #ifdef and associated dead code
  intel_pstate: provide option to only use intel_pstate with HWP
  ACPI / EC: Add GPE reference counting debugging messages
  ACPI / EC: Add query flushing support
  ACPI / EC: Refine command storm prevention support
  ACPI / EC: Add command flushing support.
  ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag
  ACPI: add AMD ACPI2Platform device support for x86 system
  ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse()
  ACPI / EC: Update revision due to raw handler mode.
  ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp.
  ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode.
  ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model
  ...

5 files changed, 126 insertions, 1 deletions

diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index b60d2ab69497..9b121a569ab4 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -243,7 +243,7 @@ input driver:
 			.owner	= THIS_MODULE,
 			.pm	= &mpu3050_pm,
 			.of_match_table = mpu3050_of_match,
-			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
+			.acpi_match_table = ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
 		.remove		= mpu3050_remove,
diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt
index 765d7fc0e692..655750743fb0 100644
--- a/Documentation/cpu-freq/intel-pstate.txt
+++ b/Documentation/cpu-freq/intel-pstate.txt
@@ -37,6 +37,14 @@ controlling P state selection. These files have been added to
       no_turbo: limits the driver to selecting P states below the turbo
       frequency range.
 
+      turbo_pct: displays the percentage of the total performance that
+      is supported by hardware that is in the turbo range.  This number
+      is independent of whether turbo has been disabled or not.
+
+      num_pstates: displays the number of pstates that are supported
+      by hardware.  This number is independent of whether turbo has
+      been disabled or not.
+
 For contemporary Intel processors, the frequency is controlled by the
 processor itself and the P-states exposed to software are related to
 performance levels.  The idea that frequency can be set to a single
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
new file mode 100644
index 000000000000..b54bf3a2ff57
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
@@ -0,0 +1,110 @@
+
+* Samsung Exynos PPMU (Platform Performance Monitoring Unit) device
+
+The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
+each IP. PPMU provides the primitive values to get performance data. These
+PPMU events provide information of the SoC's behaviors so that you may
+use to analyze system performance, to make behaviors visible and to count
+usages of each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).
+The Exynos PPMU driver uses the devfreq-event class to provide event data
+to various devfreq devices. The devfreq devices would use the event data when
+derterming the current state of each IP.
+
+Required properties:
+- compatible: Should be "samsung,exynos-ppmu".
+- reg: physical base address of each PPMU and length of memory mapped region.
+
+Optional properties:
+- clock-names : the name of clock used by the PPMU, "ppmu"
+- clocks : phandles for clock specified in "clock-names" property
+- #clock-cells: should be 1.
+
+Example1 : PPMU nodes in exynos3250.dtsi are listed below.
+
+		ppmu_dmc0: ppmu_dmc0@106a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106a0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_dmc1: ppmu_dmc1@106b0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106b0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_cpu: ppmu_cpu@106c0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106c0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_rightbus: ppmu_rightbus@112a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x112a0000 0x2000>;
+			clocks = <&cmu CLK_PPMURIGHT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_leftbus: ppmu_leftbus0@116a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x116a0000 0x2000>;
+			clocks = <&cmu CLK_PPMULEFT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
+
+	&ppmu_dmc0 {
+		status = "okay";
+
+		events {
+			ppmu_dmc0_3: ppmu-event3-dmc0 {
+				event-name = "ppmu-event3-dmc0";
+			};
+
+			ppmu_dmc0_2: ppmu-event2-dmc0 {
+				event-name = "ppmu-event2-dmc0";
+			};
+
+			ppmu_dmc0_1: ppmu-event1-dmc0 {
+				event-name = "ppmu-event1-dmc0";
+			};
+
+			ppmu_dmc0_0: ppmu-event0-dmc0 {
+				event-name = "ppmu-event0-dmc0";
+			};
+		};
+	};
+
+	&ppmu_dmc1 {
+		status = "okay";
+
+		events {
+			ppmu_dmc1_3: ppmu-event3-dmc1 {
+				event-name = "ppmu-event3-dmc1";
+			};
+		};
+	};
+
+	&ppmu_leftbus {
+		status = "okay";
+
+		events {
+			ppmu_leftbus_3: ppmu-event3-leftbus {
+				event-name = "ppmu-event3-leftbus";
+			};
+		};
+	};
+
+	&ppmu_rightbus {
+		status = "okay";
+
+		events {
+			ppmu_rightbus_3: ppmu-event3-rightbus {
+				event-name = "ppmu-event3-rightbus";
+			};
+		};
+	};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 176d4fe4f076..f06f1f609cb7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1470,6 +1470,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		       no_hwp
 		         Do not enable hardware P state control (HWP)
 			 if available.
+		hwp_only
+			Only load intel_pstate on systems which support
+			hardware P state control (HWP) if available.
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index 1bdfa0443773..4685aee197fd 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -69,6 +69,10 @@ Reason for this is that the RTC is the only reliably available piece of
 hardware during resume operations where a value can be set that will
 survive a reboot.
 
+pm_trace is not compatible with asynchronous suspend, so it turns
+asynchronous suspend off (which may work around timing or
+ordering-sensitive bugs).
+
 Consequence is that after a resume (even if it is successful) your system
 clock will have a value corresponding to the magic number instead of the
 correct date/time! It is therefore advisable to use a program like ntp-date