Merge tag 'linux-watchdog-5.7-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add TI K3 RTI watchdog

 - add stop_on_reboot parameter to control reboot policy

 - wm831x_wdt: Remove GPIO handling

 - several small fixes, improvements and clean-ups

* tag 'linux-watchdog-5.7-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Add K3 RTI watchdog support
  dt-bindings: watchdog: Add support for TI K3 RTI watchdog
  watchdog: ziirave_wdt: change name to be more specific
  watchdog: orion: use 0 for unset heartbeat
  watchdog: npcm: remove whitespaces
  watchdog: reset last_hw_keepalive time at start
  watchdog: imx2_wdt: Drop .remove callback
  watchdog: Add stop_on_reboot parameter to control reboot policy
  watchdog: wm831x_wdt: Remove GPIO handling
  watchdog: imx7ulp: Remove unused include of init.h
  watchdog: imx_sc_wdt: Remove unused includes
  watchdog: qcom: Use irq flags from firmware
  watchdog: pm8916_wdt: Add system sleep callbacks
  watchdog: qcom-wdt: disable pretimeout on timer platform

1 files changed, 65 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
new file mode 100644
index 000000000000..e83026fef2e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/ti,rti-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 SoC Watchdog Timer
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+
+description:
+  The TI K3 SoC watchdog timer is implemented via the RTI (Real Time
+  Interrupt) IP module. This timer adds a support for windowed watchdog
+  mode, which will signal an error if it is pinged outside the watchdog
+  time window, meaning either too early or too late. The error signal
+  generated can be routed to either interrupt a safety controller or
+  to directly reset the SoC.
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,j7-rti-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clocks-parents:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+examples:
+  - |
+    /*
+     * RTI WDT in main domain on J721e SoC. Assigned clocks are used to
+     * select the source clock for the watchdog, forcing it to tick with
+     * a 32kHz clock in this case.
+     */
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    watchdog0: rti@2200000 {
+        compatible = "ti,rti-wdt";
+        reg = <0x0 0x2200000 0x0 0x100>;
+        clocks = <&k3_clks 252 1>;
+        power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+        assigned-clocks = <&k3_clks 252 1>;
+        assigned-clock-parents = <&k3_clks 252 5>;
+    };