diff options
author | Jaroslav Kysela <perex@hera.kernel.org> | 2005-06-21 07:39:41 -0700 |
---|---|---|
committer | Jaroslav Kysela <perex@hera.kernel.org> | 2005-06-21 07:39:41 -0700 |
commit | fae6ec69c84d71b1d5bda9ede1a262c1681684aa (patch) | |
tree | eb4aff9a5c2b7d04ce09a3717bb1dd4a79fe7595 /Documentation | |
parent | bbc0274e9bb2e3f1d724d445a2bd32566b9b66f7 (diff) | |
parent | 1d345dac1f30af1cd9f3a1faa12f9f18f17f236e (diff) | |
download | linux-fae6ec69c84d71b1d5bda9ede1a262c1681684aa.tar.bz2 |
Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/DocBook/Makefile | 2 | ||||
-rw-r--r-- | Documentation/DocBook/kernel-api.tmpl | 1 | ||||
-rw-r--r-- | Documentation/DocBook/libata.tmpl | 156 | ||||
-rw-r--r-- | Documentation/DocBook/scsidrivers.tmpl | 193 | ||||
-rw-r--r-- | Documentation/SubmittingPatches | 8 | ||||
-rw-r--r-- | Documentation/cpu-freq/cpufreq-stats.txt | 128 | ||||
-rw-r--r-- | Documentation/driver-model/device.txt | 8 | ||||
-rw-r--r-- | Documentation/driver-model/driver.txt | 51 | ||||
-rw-r--r-- | Documentation/filesystems/sysfs.txt | 2 | ||||
-rw-r--r-- | Documentation/networking/generic-hdlc.txt | 51 | ||||
-rw-r--r-- | Documentation/networking/multicast.txt | 1 | ||||
-rw-r--r-- | Documentation/networking/net-modules.txt | 3 | ||||
-rw-r--r-- | Documentation/networking/vortex.txt | 2 | ||||
-rw-r--r-- | Documentation/scsi/ChangeLog.megaraid | 66 | ||||
-rw-r--r-- | Documentation/scsi/scsi-changer.txt | 180 | ||||
-rw-r--r-- | Documentation/scsi/scsi_mid_low_api.txt | 12 |
16 files changed, 571 insertions, 293 deletions
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index e69b3d2e7884..87da3478fada 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -8,7 +8,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ - procfs-guide.xml writing_usb_driver.xml scsidrivers.xml \ + procfs-guide.xml writing_usb_driver.xml \ sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 757cef8f8491..bb6a0106be11 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -338,7 +338,6 @@ X!Earch/i386/kernel/mca.c X!Iinclude/linux/device.h --> !Edrivers/base/driver.c -!Edrivers/base/class_simple.c !Edrivers/base/core.c !Edrivers/base/firmware_class.c !Edrivers/base/transport_class.c diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index cf2fce7707da..6df1dfd18b65 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -14,7 +14,7 @@ </authorgroup> <copyright> - <year>2003</year> + <year>2003-2005</year> <holder>Jeff Garzik</holder> </copyright> @@ -44,30 +44,38 @@ <toc></toc> - <chapter id="libataThanks"> - <title>Thanks</title> + <chapter id="libataIntroduction"> + <title>Introduction</title> <para> - The bulk of the ATA knowledge comes thanks to long conversations with - Andre Hedrick (www.linux-ide.org). + libATA is a library used inside the Linux kernel to support ATA host + controllers and devices. libATA provides an ATA driver API, class + transports for ATA and ATAPI devices, and SCSI<->ATA translation + for ATA devices according to the T10 SAT specification. </para> <para> - Thanks to Alan Cox for pointing out similarities - between SATA and SCSI, and in general for motivation to hack on - libata. - </para> - <para> - libata's device detection - method, ata_pio_devchk, and in general all the early probing was - based on extensive study of Hale Landis's probe/reset code in his - ATADRVR driver (www.ata-atapi.com). + This Guide documents the libATA driver API, library functions, library + internals, and a couple sample ATA low-level drivers. </para> </chapter> <chapter id="libataDriverApi"> <title>libata Driver API</title> + <para> + struct ata_port_operations is defined for every low-level libata + hardware driver, and it controls how the low-level driver + interfaces with the ATA and SCSI layers. + </para> + <para> + FIS-based drivers will hook into the system with ->qc_prep() and + ->qc_issue() high-level hooks. Hardware which behaves in a manner + similar to PCI IDE hardware may utilize several generic helpers, + defining at a bare minimum the bus I/O addresses of the ATA shadow + register blocks. + </para> <sect1> <title>struct ata_port_operations</title> + <sect2><title>Disable ATA port</title> <programlisting> void (*port_disable) (struct ata_port *); </programlisting> @@ -78,6 +86,9 @@ void (*port_disable) (struct ata_port *); unplug). </para> + </sect2> + + <sect2><title>Post-IDENTIFY device configuration</title> <programlisting> void (*dev_config) (struct ata_port *, struct ata_device *); </programlisting> @@ -88,6 +99,9 @@ void (*dev_config) (struct ata_port *, struct ata_device *); issue of SET FEATURES - XFER MODE, and prior to operation. </para> + </sect2> + + <sect2><title>Set PIO/DMA mode</title> <programlisting> void (*set_piomode) (struct ata_port *, struct ata_device *); void (*set_dmamode) (struct ata_port *, struct ata_device *); @@ -108,6 +122,9 @@ void (*post_set_mode) (struct ata_port *ap); ->set_dma_mode() is only called if DMA is possible. </para> + </sect2> + + <sect2><title>Taskfile read/write</title> <programlisting> void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); @@ -120,6 +137,9 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); taskfile register values. </para> + </sect2> + + <sect2><title>ATA command execute</title> <programlisting> void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); </programlisting> @@ -129,17 +149,37 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); ->tf_load(), to be initiated in hardware. </para> + </sect2> + + <sect2><title>Per-cmd ATAPI DMA capabilities filter</title> + <programlisting> +int (*check_atapi_dma) (struct ata_queued_cmd *qc); + </programlisting> + + <para> +Allow low-level driver to filter ATA PACKET commands, returning a status +indicating whether or not it is OK to use DMA for the supplied PACKET +command. + </para> + + </sect2> + + <sect2><title>Read specific ATA shadow registers</title> <programlisting> u8 (*check_status)(struct ata_port *ap); -void (*dev_select)(struct ata_port *ap, unsigned int device); +u8 (*check_altstatus)(struct ata_port *ap); +u8 (*check_err)(struct ata_port *ap); </programlisting> <para> - Reads the Status ATA shadow register from hardware. On some - hardware, this has the side effect of clearing the interrupt - condition. + Reads the Status/AltStatus/Error ATA shadow register from + hardware. On some hardware, reading the Status register has + the side effect of clearing the interrupt condition. </para> + </sect2> + + <sect2><title>Select ATA device on bus</title> <programlisting> void (*dev_select)(struct ata_port *ap, unsigned int device); </programlisting> @@ -147,9 +187,13 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); <para> Issues the low-level hardware command(s) that causes one of N hardware devices to be considered 'selected' (active and - available for use) on the ATA bus. + available for use) on the ATA bus. This generally has no +meaning on FIS-based devices. </para> + </sect2> + + <sect2><title>Reset ATA bus</title> <programlisting> void (*phy_reset) (struct ata_port *ap); </programlisting> @@ -162,17 +206,31 @@ void (*phy_reset) (struct ata_port *ap); functions ata_bus_reset() or sata_phy_reset() for this hook. </para> + </sect2> + + <sect2><title>Control PCI IDE BMDMA engine</title> <programlisting> void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); +void (*bmdma_stop) (struct ata_port *ap); +u8 (*bmdma_status) (struct ata_port *ap); </programlisting> <para> - When setting up an IDE BMDMA transaction, these hooks arm - (->bmdma_setup) and fire (->bmdma_start) the hardware's DMA - engine. +When setting up an IDE BMDMA transaction, these hooks arm +(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop) +the hardware's DMA engine. ->bmdma_status is used to read the standard +PCI IDE DMA Status register. </para> + <para> +These hooks are typically either no-ops, or simply not implemented, in +FIS-based drivers. + </para> + + </sect2> + + <sect2><title>High-level taskfile hooks</title> <programlisting> void (*qc_prep) (struct ata_queued_cmd *qc); int (*qc_issue) (struct ata_queued_cmd *qc); @@ -190,20 +248,26 @@ int (*qc_issue) (struct ata_queued_cmd *qc); ->qc_issue is used to make a command active, once the hardware and S/G tables have been prepared. IDE BMDMA drivers use the helper function ata_qc_issue_prot() for taskfile protocol-based - dispatch. More advanced drivers roll their own ->qc_issue - implementation, using this as the "issue new ATA command to - hardware" hook. + dispatch. More advanced drivers implement their own ->qc_issue. </para> + </sect2> + + <sect2><title>Timeout (error) handling</title> <programlisting> void (*eng_timeout) (struct ata_port *ap); </programlisting> <para> - This is a high level error handling function, called from the - error handling thread, when a command times out. +This is a high level error handling function, called from the +error handling thread, when a command times out. Most newer +hardware will implement its own error handling code here. IDE BMDMA +drivers may use the helper function ata_eng_timeout(). </para> + </sect2> + + <sect2><title>Hardware interrupt handling</title> <programlisting> irqreturn_t (*irq_handler)(int, void *, struct pt_regs *); void (*irq_clear) (struct ata_port *); @@ -216,6 +280,9 @@ void (*irq_clear) (struct ata_port *); is quiet. </para> + </sect2> + + <sect2><title>SATA phy read/write</title> <programlisting> u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg); void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, @@ -227,6 +294,9 @@ void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, if ->phy_reset hook called the sata_phy_reset() helper function. </para> + </sect2> + + <sect2><title>Init and shutdown</title> <programlisting> int (*port_start) (struct ata_port *ap); void (*port_stop) (struct ata_port *ap); @@ -240,15 +310,17 @@ void (*host_stop) (struct ata_host_set *host_set); tasks. </para> <para> - ->host_stop() is called when the rmmod or hot unplug process - begins. The hook must stop all hardware interrupts, DMA - engines, etc. - </para> - <para> ->port_stop() is called after ->host_stop(). It's sole function is to release DMA/memory resources, now that they are no longer actively being used. </para> + <para> + ->host_stop() is called after all ->port_stop() calls +have completed. The hook must finalize hardware shutdown, release DMA +and other resources, etc. + </para> + + </sect2> </sect1> </chapter> @@ -279,4 +351,24 @@ void (*host_stop) (struct ata_host_set *host_set); !Idrivers/scsi/sata_sil.c </chapter> + <chapter id="libataThanks"> + <title>Thanks</title> + <para> + The bulk of the ATA knowledge comes thanks to long conversations with + Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA + and SCSI specifications. + </para> + <para> + Thanks to Alan Cox for pointing out similarities + between SATA and SCSI, and in general for motivation to hack on + libata. + </para> + <para> + libata's device detection + method, ata_pio_devchk, and in general all the early probing was + based on extensive study of Hale Landis's probe/reset code in his + ATADRVR driver (www.ata-atapi.com). + </para> + </chapter> + </book> diff --git a/Documentation/DocBook/scsidrivers.tmpl b/Documentation/DocBook/scsidrivers.tmpl deleted file mode 100644 index d058e65daf19..000000000000 --- a/Documentation/DocBook/scsidrivers.tmpl +++ /dev/null @@ -1,193 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" - "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> - -<book id="scsidrivers"> - <bookinfo> - <title>SCSI Subsystem Interfaces</title> - - <authorgroup> - <author> - <firstname>Douglas</firstname> - <surname>Gilbert</surname> - <affiliation> - <address> - <email>dgilbert@interlog.com</email> - </address> - </affiliation> - </author> - </authorgroup> - <pubdate>2003-08-11</pubdate> - - <copyright> - <year>2002</year> - <year>2003</year> - <holder>Douglas Gilbert</holder> - </copyright> - - <legalnotice> - <para> - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later - version. - </para> - - <para> - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - </para> - - <para> - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - </para> - - <para> - For more details see the file COPYING in the source - distribution of Linux. - </para> - </legalnotice> - - </bookinfo> - -<toc></toc> - - <chapter id="intro"> - <title>Introduction</title> - <para> -This document outlines the interface between the Linux scsi mid level -and lower level drivers. Lower level drivers are variously called HBA -(host bus adapter) drivers, host drivers (HD) or pseudo adapter drivers. -The latter alludes to the fact that a lower level driver may be a -bridge to another IO subsystem (and the "ide-scsi" driver is an example -of this). There can be many lower level drivers active in a running -system, but only one per hardware type. For example, the aic7xxx driver -controls adaptec controllers based on the 7xxx chip series. Most lower -level drivers can control one or more scsi hosts (a.k.a. scsi initiators). - </para> -<para> -This document can been found in an ASCII text file in the linux kernel -source: <filename>Documentation/scsi/scsi_mid_low_api.txt</filename> . -It currently hold a little more information than this document. The -<filename>drivers/scsi/hosts.h</filename> and <filename> -drivers/scsi/scsi.h</filename> headers contain descriptions of members -of important structures for the scsi subsystem. -</para> - </chapter> - - <chapter id="driver-struct"> - <title>Driver structure</title> - <para> -Traditionally a lower level driver for the scsi subsystem has been -at least two files in the drivers/scsi directory. For example, a -driver called "xyz" has a header file "xyz.h" and a source file -"xyz.c". [Actually there is no good reason why this couldn't all -be in one file.] Some drivers that have been ported to several operating -systems (e.g. aic7xxx which has separate files for generic and -OS-specific code) have more than two files. Such drivers tend to have -their own directory under the drivers/scsi directory. - </para> - <para> -scsi_module.c is normally included at the end of a lower -level driver. For it to work a declaration like this is needed before -it is included: -<programlisting> - static Scsi_Host_Template driver_template = DRIVER_TEMPLATE; - /* DRIVER_TEMPLATE should contain pointers to supported interface - functions. Scsi_Host_Template is defined hosts.h */ - #include "scsi_module.c" -</programlisting> - </para> - <para> -The scsi_module.c assumes the name "driver_template" is appropriately -defined. It contains 2 functions: -<orderedlist> -<listitem><para> - init_this_scsi_driver() called during builtin and module driver - initialization: invokes mid level's scsi_register_host() -</para></listitem> -<listitem><para> - exit_this_scsi_driver() called during closedown: invokes - mid level's scsi_unregister_host() -</para></listitem> -</orderedlist> - </para> -<para> -When a new, lower level driver is being added to Linux, the following -files (all found in the drivers/scsi directory) will need some attention: -Makefile, Config.help and Config.in . It is probably best to look at what -an existing lower level driver does in this regard. -</para> - </chapter> - - <chapter id="intfunctions"> - <title>Interface Functions</title> -!EDocumentation/scsi/scsi_mid_low_api.txt - </chapter> - - <chapter id="locks"> - <title>Locks</title> -<para> -Each Scsi_Host instance has a spin_lock called Scsi_Host::default_lock -which is initialized in scsi_register() [found in hosts.c]. Within the -same function the Scsi_Host::host_lock pointer is initialized to point -at default_lock with the scsi_assign_lock() function. Thereafter -lock and unlock operations performed by the mid level use the -Scsi_Host::host_lock pointer. -</para> -<para> -Lower level drivers can override the use of Scsi_Host::default_lock by -using scsi_assign_lock(). The earliest opportunity to do this would -be in the detect() function after it has invoked scsi_register(). It -could be replaced by a coarser grain lock (e.g. per driver) or a -lock of equal granularity (i.e. per host). Using finer grain locks -(e.g. per scsi device) may be possible by juggling locks in -queuecommand(). -</para> - </chapter> - - <chapter id="changes"> - <title>Changes since lk 2.4 series</title> -<para> -io_request_lock has been replaced by several finer grained locks. The lock -relevant to lower level drivers is Scsi_Host::host_lock and there is one -per scsi host. -</para> -<para> -The older error handling mechanism has been removed. This means the -lower level interface functions abort() and reset() have been removed. -</para> -<para> -In the 2.4 series the scsi subsystem configuration descriptions were -aggregated with the configuration descriptions from all other Linux -subsystems in the Documentation/Configure.help file. In the 2.5 series, -the scsi subsystem now has its own (much smaller) drivers/scsi/Config.help -file. -</para> - </chapter> - - <chapter id="credits"> - <title>Credits</title> -<para> -The following people have contributed to this document: -<orderedlist> -<listitem><para> -Mike Anderson <email>andmike@us.ibm.com</email> -</para></listitem> -<listitem><para> -James Bottomley <email>James.Bottomley@steeleye.com</email> -</para></listitem> -<listitem><para> -Patrick Mansfield <email>patmans@us.ibm.com</email> -</para></listitem> -</orderedlist> -</para> - </chapter> - -</book> diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 9838d32b2fe7..4d35562b1cf9 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -271,7 +271,7 @@ patch, which certifies that you wrote it or otherwise have the right to pass it on as a open-source patch. The rules are pretty simple: if you can certify the below: - Developer's Certificate of Origin 1.0 + Developer's Certificate of Origin 1.1 By making a contribution to this project, I certify that: @@ -291,6 +291,12 @@ can certify the below: person who certified (a), (b) or (c) and I have not modified it. + (d) I understand and agree that this project and the contribution + are public and that a record of the contribution (including all + personal information I submit with it, including my sign-off) is + maintained indefinitely and may be redistributed consistent with + this project or the open source license(s) involved. + then you just add a line saying Signed-off-by: Random J Developer <random@developer.org> diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt new file mode 100644 index 000000000000..e2d1e760b4ba --- /dev/null +++ b/Documentation/cpu-freq/cpufreq-stats.txt @@ -0,0 +1,128 @@ + + CPU frequency and voltage scaling statictics in the Linux(TM) kernel + + + L i n u x c p u f r e q - s t a t s d r i v e r + + - information for users - + + + Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + +Contents +1. Introduction +2. Statistics Provided (with example) +3. Configuring cpufreq-stats + + +1. Introduction + +cpufreq-stats is a driver that provices CPU frequency statistics for each CPU. +This statistics is provided in /sysfs as a bunch of read_only interfaces. This +interface (when configured) will appear in a seperate directory under cpufreq +in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU. +Various statistics will form read_only files under this directory. + +This driver is designed to be independent of any particular cpufreq_driver +that may be running on your CPU. So, it will work with any cpufreq_driver. + + +2. Statistics Provided (with example) + +cpufreq stats provides following statistics (explained in detail below). +- time_in_state +- total_trans +- trans_table + +All the statistics will be from the time the stats driver has been inserted +to the time when a read of a particular statistic is done. Obviously, stats +driver will not have any information about the the frequcny transitions before +the stats driver insertion. + +-------------------------------------------------------------------------------- +<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l +total 0 +drwxr-xr-x 2 root root 0 May 14 16:06 . +drwxr-xr-x 3 root root 0 May 14 15:58 .. +-r--r--r-- 1 root root 4096 May 14 16:06 time_in_state +-r--r--r-- 1 root root 4096 May 14 16:06 total_trans +-r--r--r-- 1 root root 4096 May 14 16:06 trans_table +-------------------------------------------------------------------------------- + +- time_in_state +This gives the amount of time spent in each of the frequencies supported by +this CPU. The cat output will have "<frequency> <time>" pair in each line, which +will mean this CPU spent <time> usertime units of time at <frequency>. Output +will have one line for each of the supported freuencies. usertime units here +is 10mS (similar to other time exported in /proc). + +-------------------------------------------------------------------------------- +<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state +3600000 2089 +3400000 136 +3200000 34 +3000000 67 +2800000 172488 +-------------------------------------------------------------------------------- + + +- total_trans +This gives the total number of frequency transitions on this CPU. The cat +output will have a single count which is the total number of frequency +transitions. + +-------------------------------------------------------------------------------- +<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans +20 +-------------------------------------------------------------------------------- + +- trans_table +This will give a fine grained information about all the CPU frequency +transitions. The cat output here is a two dimensional matrix, where an entry +<i,j> (row i, column j) represents the count of number of transitions from +Freq_i to Freq_j. Freq_i is in descending order with increasing rows and +Freq_j is in descending order with increasing columns. The output here also +contains the actual freq values for each row and column for better readability. + +-------------------------------------------------------------------------------- +<mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table + From : To + : 3600000 3400000 3200000 3000000 2800000 + 3600000: 0 5 0 0 0 + 3400000: 4 0 2 0 0 + 3200000: 0 1 0 2 0 + 3000000: 0 0 1 0 3 + 2800000: 0 0 0 2 0 +-------------------------------------------------------------------------------- + + +3. Configuring cpufreq-stats + +To configure cpufreq-stats in your kernel +Config Main Menu + Power management options (ACPI, APM) ---> + CPU Frequency scaling ---> + [*] CPU Frequency scaling + <*> CPU frequency translation statistics + [*] CPU frequency translation statistics details + + +"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure +cpufreq-stats. + +"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the +basic statistics which includes time_in_state and total_trans. + +"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS) +provides fine grained cpufreq stats by trans_table. The reason for having a +seperate config option for trans_table is: +- trans_table goes against the traditional /sysfs rule of one value per + interface. It provides a whole bunch of value in a 2 dimensional matrix + form. + +Once these two options are enabled and your CPU supports cpufrequency, you +will be able to see the CPU frequency statistics in /sysfs. + + + + diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt index 58cc5dc8fd3e..a05ec50f8004 100644 --- a/Documentation/driver-model/device.txt +++ b/Documentation/driver-model/device.txt @@ -76,6 +76,14 @@ driver_data: Driver-specific data. platform_data: Platform data specific to the device. + Example: for devices on custom boards, as typical of embedded + and SOC based hardware, Linux often uses platform_data to point + to board-specific structures describing devices and how they + are wired. That can include what ports are available, chip + variants, which GPIO pins act in what additional roles, and so + on. This shrinks the "Board Support Packages" (BSPs) and + minimizes board-specific #ifdefs in drivers. + current_state: Current power state of the device. saved_state: Pointer to saved state of the device. This is usable by diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index 6031a68dd3f5..fabaca1ab1b0 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -5,21 +5,17 @@ struct device_driver { char * name; struct bus_type * bus; - rwlock_t lock; - atomic_t refcount; - - list_t bus_list; + struct completion unloaded; + struct kobject kobj; list_t devices; - struct driver_dir_entry dir; + struct module *owner; int (*probe) (struct device * dev); int (*remove) (struct device * dev); int (*suspend) (struct device * dev, pm_message_t state, u32 level); int (*resume) (struct device * dev, u32 level); - - void (*release) (struct device_driver * drv); }; @@ -51,7 +47,6 @@ being converted completely to the new model. static struct device_driver eepro100_driver = { .name = "eepro100", .bus = &pci_bus_type, - .devclass = ðernet_devclass, /* when it's implemented */ .probe = eepro100_probe, .remove = eepro100_remove, @@ -85,7 +80,6 @@ static struct pci_driver eepro100_driver = { .driver = { .name = "eepro100", .bus = &pci_bus_type, - .devclass = ðernet_devclass, /* when it's implemented */ .probe = eepro100_probe, .remove = eepro100_remove, .suspend = eepro100_suspend, @@ -166,27 +160,32 @@ Callbacks int (*probe) (struct device * dev); -probe is called to verify the existence of a certain type of -hardware. This is called during the driver binding process, after the -bus has verified that the device ID of a device matches one of the -device IDs supported by the driver. - -This callback only verifies that there actually is supported hardware -present. It may allocate a driver-specific structure, but it should -not do any initialization of the hardware itself. The device-specific -structure may be stored in the device's driver_data field. - - int (*init) (struct device * dev); - -init is called during the binding stage. It is called after probe has -successfully returned and the device has been registered with its -class. It is responsible for initializing the hardware. +The probe() entry is called in task context, with the bus's rwsem locked +and the driver partially bound to the device. Drivers commonly use +container_of() to convert "dev" to a bus-specific type, both in probe() +and other routines. That type often provides device resource data, such +as pci_dev.resource[] or platform_device.resources, which is used in +addition to dev->platform_data to initialize the driver. + +This callback holds the driver-specific logic to bind the driver to a +given device. That includes verifying that the device is present, that +it's a version the driver can handle, that driver data structures can +be allocated and initialized, and that any hardware can be initialized. +Drivers often store a pointer to their state with dev_set_drvdata(). +When the driver has successfully bound itself to that device, then probe() +returns zero and the driver model code will finish its part of binding +the driver to that device. + +A driver's probe() may return a negative errno value to indicate that +the driver did not bind to this device, in which case it should have +released all reasources it allocated. int (*remove) (struct device * dev); -remove is called to dissociate a driver with a device. This may be +remove is called to unbind a driver from a device. This may be called if a device is physically removed from the system, if the -driver module is being unloaded, or during a reboot sequence. +driver module is being unloaded, during a reboot sequence, or +in other cases. It is up to the driver to determine if the device is present or not. It should free any resources allocated specifically for the diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index 60f6c2c4d477..dc276598a65a 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -214,7 +214,7 @@ Other notes: A very simple (and naive) implementation of a device attribute is: -static ssize_t show_name(struct device * dev, char * buf) +static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf) { return sprintf(buf,"%s\n",dev->name); } diff --git a/Documentation/networking/generic-hdlc.txt b/Documentation/networking/generic-hdlc.txt index 7d1dc6b884f3..31bc8b759b75 100644 --- a/Documentation/networking/generic-hdlc.txt +++ b/Documentation/networking/generic-hdlc.txt @@ -1,21 +1,21 @@ Generic HDLC layer Krzysztof Halasa <khc@pm.waw.pl> -January, 2003 Generic HDLC layer currently supports: -- Frame Relay (ANSI, CCITT and no LMI), with ARP support (no InARP). - Normal (routed) and Ethernet-bridged (Ethernet device emulation) - interfaces can share a single PVC. -- raw HDLC - either IP (IPv4) interface or Ethernet device emulation. -- Cisco HDLC, -- PPP (uses syncppp.c), -- X.25 (uses X.25 routines). - -There are hardware drivers for the following cards: -- C101 by Moxa Technologies Co., Ltd. -- RISCom/N2 by SDL Communications Inc. -- and others, some not in the official kernel. +1. Frame Relay (ANSI, CCITT, Cisco and no LMI). + - Normal (routed) and Ethernet-bridged (Ethernet device emulation) + interfaces can share a single PVC. + - ARP support (no InARP support in the kernel - there is an + experimental InARP user-space daemon available on: + http://www.kernel.org/pub/linux/utils/net/hdlc/). +2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation. +3. Cisco HDLC. +4. PPP (uses syncppp.c). +5. X.25 (uses X.25 routines). + +Generic HDLC is a protocol driver only - it needs a low-level driver +for your particular hardware. Ethernet device emulation (using HDLC or Frame-Relay PVC) is compatible with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging). @@ -24,7 +24,7 @@ with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging). Make sure the hdlc.o and the hardware driver are loaded. It should create a number of "hdlc" (hdlc0 etc) network devices, one for each WAN port. You'll need the "sethdlc" utility, get it from: - http://hq.pm.waw.pl/hdlc/ + http://www.kernel.org/pub/linux/utils/net/hdlc/ Compile sethdlc.c utility: gcc -O2 -Wall -o sethdlc sethdlc.c @@ -52,12 +52,12 @@ Setting interface: * v35 | rs232 | x21 | t1 | e1 - sets physical interface for a given port if the card has software-selectable interfaces loopback - activate hardware loopback (for testing only) -* clock ext - external clock (uses DTE RX and TX clock) -* clock int - internal clock (provides clock signal on DCE clock output) -* clock txint - TX internal, RX external (provides TX clock on DCE output) -* clock txfromrx - TX clock derived from RX clock (TX clock on DCE output) -* rate - sets clock rate in bps (not required for external clock or - for txfromrx) +* clock ext - both RX clock and TX clock external +* clock int - both RX clock and TX clock internal +* clock txint - RX clock external, TX clock internal +* clock txfromrx - RX clock external, TX clock derived from RX clock +* rate - sets clock rate in bps (for "int" or "txint" clock only) + Setting protocol: @@ -79,7 +79,7 @@ Setting protocol: * x25 - sets X.25 mode * fr - Frame Relay mode - lmi ansi / ccitt / none - LMI (link management) type + lmi ansi / ccitt / cisco / none - LMI (link management) type dce - Frame Relay DCE (network) side LMI instead of default DTE (user). It has nothing to do with clocks! t391 - link integrity verification polling timer (in seconds) - user @@ -119,13 +119,14 @@ or -If you have a problem with N2 or C101 card, you can issue the "private" -command to see port's packet descriptor rings (in kernel logs): +If you have a problem with N2, C101 or PLX200SYN card, you can issue the +"private" command to see port's packet descriptor rings (in kernel logs): sethdlc hdlc0 private -The hardware driver has to be build with CONFIG_HDLC_DEBUG_RINGS. +The hardware driver has to be build with #define DEBUG_RINGS. Attaching this info to bug reports would be helpful. Anyway, let me know if you have problems using this. -For patches and other info look at http://hq.pm.waw.pl/hdlc/ +For patches and other info look at: +<http://www.kernel.org/pub/linux/utils/net/hdlc/>. diff --git a/Documentation/networking/multicast.txt b/Documentation/networking/multicast.txt index 5049a64313d1..b06c8c69266f 100644 --- a/Documentation/networking/multicast.txt +++ b/Documentation/networking/multicast.txt @@ -47,7 +47,6 @@ ni52 <------------------ Buggy ------------------> ni65 YES YES YES Software(#) seeq NO NO NO N/A sgiseek <------------------ Buggy ------------------> -sk_g16 NO NO YES N/A smc-ultra YES YES YES Hardware sunlance YES YES YES Hardware tulip YES YES YES Hardware diff --git a/Documentation/networking/net-modules.txt b/Documentation/networking/net-modules.txt index 3830a83513d2..0b27863f155c 100644 --- a/Documentation/networking/net-modules.txt +++ b/Documentation/networking/net-modules.txt @@ -284,9 +284,6 @@ ppp.c: seeq8005.c: *Not modularized* (Probes ports: 0x300, 0x320, 0x340, 0x360) -sk_g16.c: *Not modularized* - (Probes ports: 0x100, 0x180, 0x208, 0x220m 0x288, 0x320, 0x328, 0x390) - skeleton.c: *Skeleton* slhc.c: diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index fa12a9e4abdd..80e1cb19609f 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -12,7 +12,7 @@ Don is no longer the prime maintainer of this version of the driver. Please report problems to one or more of: Andrew Morton <andrewm@uow.edu.au> - Netdev mailing list <netdev@oss.sgi.com> + Netdev mailing list <netdev@vger.kernel.org> Linux kernel mailing list <linux-kernel@vger.kernel.org> Please note the 'Reporting and Diagnosing Problems' section at the end diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index a9356c63b800..5331d91432c7 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -1,3 +1,69 @@ +Release Date : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com> +Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module) +Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module) + +1. Added IOCTL backward compatibility. + Convert megaraid_mm driver to new compat_ioctl entry points. + I don't have easy access to hardware, so only compile tested. + - Signed-off-by:Andi Kleen <ak@muc.de> + +2. megaraid_mbox fix: wrong order of arguments in memset() + That, BTW, shows why cross-builds are useful-the only indication of + problem had been a new warning showing up in sparse output on alpha + build (number of exceeding 256 got truncated). + - Signed-off-by: Al Viro + <viro@parcelfarce.linux.theplanet.co.uk> + +3. Convert pci_module_init to pci_register_driver + Convert from pci_module_init to pci_register_driver + (from:http://kerneljanitors.org/TODO) + - Signed-off-by: Domen Puncer <domen@coderock.org> + +4. Use the pre defined DMA mask constants from dma-mapping.h + Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling + pci_set_dma_mask() or pci_set_consistend_dma_mask(). See + http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for more + details. + Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> + Signed-off-by: Domen Puncer <domen@coderock.org> + +5. Remove SSID checking for Dobson, Lindsay, and Verde based products. + Checking the SSVID/SSID for controllers which have Dobson, Lindsay, + and Verde is unnecessary because device ID has been assigned by LSI + and it is unique value. So, all controllers with these IOPs have to be + supported by the driver regardless SSVID/SSID. + +6. Date Thu, 27 Jan 2005 04:31:09 +0100 + From Herbert Poetzl <> + Subject RFC: assert_spin_locked() for 2.6 + + Greetings! + + overcautious programming will kill your kernel ;) + ever thought about checking a spin_lock or even + asserting that it must be held (maybe just for + spinlock debugging?) ... + + there are several checks present in the kernel + where somebody does a variation on the following: + + BUG_ON(!spin_is_locked(&some_lock)); + + so what's wrong about that? nothing, unless you + compile the code with CONFIG_DEBUG_SPINLOCK but + without CONFIG_SMP ... in which case the BUG() + will kill your kernel ... + + maybe it's not advised to make such assertions, + but here is a solution which works for me ... + (compile tested for sh, x86_64 and x86, boot/run + tested for x86 only) + + best, + Herbert + + - Herbert Poetzl <herbert@13thfloor.at>, Thu, 27 Jan 2005 + Release Date : Thu Feb 03 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com> Current Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module) Older Version : 2.20.4.4 (scsi module), 2.20.2.4 (cmm module) diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt new file mode 100644 index 000000000000..c132687b017a --- /dev/null +++ b/Documentation/scsi/scsi-changer.txt @@ -0,0 +1,180 @@ + +README for the SCSI media changer driver +======================================== + +This is a driver for SCSI Medium Changer devices, which are listed +with "Type: Medium Changer" in /proc/scsi/scsi. + +This is for *real* Jukeboxes. It is *not* supported to work with +common small CD-ROM changers, neither one-lun-per-slot SCSI changers +nor IDE drives. + +Userland tools available from here: + http://linux.bytesex.org/misc/changer.html + + +General Information +------------------- + +First some words about how changers work: A changer has 2 (possibly +more) SCSI ID's. One for the changer device which controls the robot, +and one for the device which actually reads and writes the data. The +later may be anything, a MOD, a CD-ROM, a tape or whatever. For the +changer device this is a "don't care", he *only* shuffles around the +media, nothing else. + + +The SCSI changer model is complex, compared to - for example - IDE-CD +changers. But it allows to handle nearly all possible cases. It knows +4 different types of changer elements: + + media transport - this one shuffles around the media, i.e. the + transport arm. Also known as "picker". + storage - a slot which can hold a media. + import/export - the same as above, but is accessable from outside, + i.e. there the operator (you !) can use this to + fill in and remove media from the changer. + Sometimes named "mailslot". + data transfer - this is the device which reads/writes, i.e. the + CD-ROM / Tape / whatever drive. + +None of these is limited to one: A huge Jukebox could have slots for +123 CD-ROM's, 5 CD-ROM readers (and therefore 6 SCSI ID's: the changer +and each CD-ROM) and 2 transport arms. No problem to handle. + + +How it is implemented +--------------------- + +I implemented the driver as character device driver with a NetBSD-like +ioctl interface. Just grabbed NetBSD's header file and one of the +other linux SCSI device drivers as starting point. The interface +should be source code compatible with NetBSD. So if there is any +software (anybody knows ???) which supports a BSDish changer driver, +it should work with this driver too. + +Over time a few more ioctls where added, volume tag support for example +wasn't covered by the NetBSD ioctl API. + + +Current State +------------- + +Support for more than one transport arm is not implemented yet (and +nobody asked for it so far...). + +I test and use the driver myself with a 35 slot cdrom jukebox from +Grundig. I got some reports telling it works ok with tape autoloaders +(Exabyte, HP and DEC). Some People use this driver with amanda. It +works fine with small (11 slots) and a huge (4 MOs, 88 slots) +magneto-optical Jukebox. Probably with lots of other changers too, most +(but not all :-) people mail me only if it does *not* work... + +I don't have any device lists, neither black-list nor white-list. Thus +it is quite useless to ask me whenever a specific device is supported or +not. In theory every changer device which supports the SCSI-2 media +changer command set should work out-of-the-box with this driver. If it +doesn't, it is a bug. Either within the driver or within the firmware +of the changer device. + + +Using it +-------- + +This is a character device with major number is 86, so use +"mknod /dev/sch0 c 86 0" to create the special file for the driver. + +If the module finds the changer, it prints some messages about the +device [ try "dmesg" if you don't see anything ] and should show up in +/proc/devices. If not.... some changers use ID ? / LUN 0 for the +device and ID ? / LUN 1 for the robot mechanism. But Linux does *not* +look for LUN's other than 0 as default, becauce there are to many +broken devices. So you can try: + + 1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi + (replace ID with the SCSI-ID of the device) + 2) boot the kernel with "max_scsi_luns=1" on the command line + (append="max_scsi_luns=1" in lilo.conf should do the trick) + + +Trouble? +-------- + +If you insmod the driver with "insmod debug=1", it will be verbose and +prints a lot of stuff to the syslog. Compiling the kernel with +CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot +because the kernel will translate the error codes into human-readable +strings then. + +You can display these messages with the dmesg command (or check the +logfiles). If you email me some question becauce of a problem with the +driver, please include these messages. + + +Insmod options +-------------- + +debug=0/1 + Enable debug messages (see above, default: 0). + +verbose=0/1 + Be verbose (default: 1). + +init=0/1 + Send INITIALIZE ELEMENT STATUS command to the changer + at insmod time (default: 1). + +timeout_init=<seconds> + timeout for the INITIALIZE ELEMENT STATUS command + (default: 3600). + +timeout_move=<seconds> + timeout for all other commands (default: 120). + +dt_id=<id1>,<id2>,... +dt_lun=<lun1>,<lun2>,... + These two allow to specify the SCSI ID and LUN for the data + transfer elements. You likely don't need this as the jukebox + should provide this information. But some devices don't ... + +vendor_firsts= +vendor_counts= +vendor_labels= + These insmod options can be used to tell the driver that there + are some vendor-specific element types. Grundig for example + does this. Some jukeboxes have a printer to label fresh burned + CDs, which is addressed as element 0xc000 (type 5). To tell the + driver about this vendor-specific element, use this: + $ insmod ch \ + vendor_firsts=0xc000 \ + vendor_counts=1 \ + vendor_labels=printer + All three insmod options accept up to four comma-separated + values, this way you can configure the element types 5-8. + You likely need the SCSI specs for the device in question to + find the correct values as they are not covered by the SCSI-2 + standard. + + +Credits +------- + +I wrote this driver using the famous mailing-patches-around-the-world +method. With (more or less) help from: + + Daniel Moehwald <moehwald@hdg.de> + Dane Jasper <dane@sonic.net> + R. Scott Bailey <sbailey@dsddi.eds.com> + Jonathan Corbet <corbet@lwn.net> + +Special thanks go to + Martin Kuehne <martin.kuehne@bnbt.de> +for a old, second-hand (but full functional) cdrom jukebox which I use +to develop/test driver and tools now. + +Have fun, + + Gerd + +-- +Gerd Knorr <kraxel@bytesex.org> diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index e41703d7d24d..da176c95d0fb 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -936,8 +936,7 @@ Details: * * Returns SUCCESS if command aborted else FAILED * - * Locks: struct Scsi_Host::host_lock held (with irqsave) on entry - * and assumed to be held on return. + * Locks: None held * * Calling context: kernel thread * @@ -955,8 +954,7 @@ Details: * * Returns SUCCESS if command aborted else FAILED * - * Locks: struct Scsi_Host::host_lock held (with irqsave) on entry - * and assumed to be held on return. + * Locks: None held * * Calling context: kernel thread * @@ -974,8 +972,7 @@ Details: * * Returns SUCCESS if command aborted else FAILED * - * Locks: struct Scsi_Host::host_lock held (with irqsave) on entry - * and assumed to be held on return. + * Locks: None held * * Calling context: kernel thread * @@ -993,8 +990,7 @@ Details: * * Returns SUCCESS if command aborted else FAILED * - * Locks: struct Scsi_Host::host_lock held (with irqsave) on entry - * and assumed to be held on return. + * Locks: None held * * Calling context: kernel thread * |