diff options
author | Aisheng Dong <aisheng.dong@nxp.com> | 2018-12-18 15:22:54 +0000 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2018-12-27 10:42:11 +0100 |
commit | 88cc9fc41c7318565bcf28a843b1e4e3f2acf894 (patch) | |
tree | 45cda98acb320f25769c72098e6a0ccb47f9e2b6 /Documentation | |
parent | b09f629ce36d94381f96a03ea1507861d1d5de3b (diff) | |
download | linux-88cc9fc41c7318565bcf28a843b1e4e3f2acf894.tar.bz2 |
dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
Update binding doc to support imx8qm pinctrl.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 46d0af1f0872..831d5dfd24c8 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -96,13 +96,16 @@ Pinctrl bindings based on SCU Message Protocol This binding uses the i.MX common pinctrl binding[3]. Required properties: -- compatible: Should be "fsl,imx8qxp-iomuxc". +- compatible: Should be one of: + "fsl,imx8qm-iomuxc", + "fsl,imx8qxp-iomuxc". Required properties for Pinctrl sub nodes: - fsl,pins: Each entry consists of 3 integers which represents the mux and config setting for one pin. The first 2 integers <pin_id mux_mode> are specified using a PIN_FUNC_ID macro, which can be found in + <dt-bindings/pinctrl/pads-imx8qm.h>, <dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. |