summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorDouglas Anderson <dianders@chromium.org>2018-10-25 15:21:33 -0700
committerSean Paul <seanpaul@chromium.org>2018-10-29 11:53:27 -0400
commitc0e9ab24723cbc0be32993f02b34477929555e0d (patch)
treea2952a68cb2292b37c16d69a85b51503b9efc591 /Documentation
parentc2bfc223882d4b9d73be970e00ead6fe7868bdb7 (diff)
downloadlinux-c0e9ab24723cbc0be32993f02b34477929555e0d.tar.bz2
dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
As far as I can tell the bindings that were added in commit 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings") weren't actually for Innolux TV123WAM but were actually for Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. While we doing the rename, also mention that no-hpd can be used with this panel. See the previous patch in this series ("drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM"). Fixes: 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings") Cc: Sandeep Panda <spanda@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-5-dianders@chromium.org
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt (renamed from Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt)8
1 files changed, 5 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
index a9b35265fa13..513f03466aba 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
@@ -1,20 +1,22 @@
-Innolux TV123WAM 12.3 inch eDP 2K display panel
+Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
Required properties:
-- compatible: should be "innolux,tv123wam"
+- compatible: should be "innolux,p120zdg-bf1"
- power-supply: regulator to provide the supply voltage
Optional properties:
- enable-gpios: GPIO pin to enable or disable the panel
- backlight: phandle of the backlight device attached to the panel
+- no-hpd: If HPD isn't hooked up; add this property.
Example:
panel_edp: panel-edp {
- compatible = "innolux,tv123wam";
+ compatible = "innolux,p120zdg-bf1";
enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
power-supply = <&pm8916_l2>;
backlight = <&backlight>;
+ no-hpd;
};