summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-04-13 15:05:40 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-04-13 15:05:40 -0700
commit0055dc5b23cc1738fc2f14221cf922a83057d8fb (patch)
tree791ace137da6784403804b15cd8195fd51a1a4a0 /Documentation
parent1b57c7c2fbb81763cd4a6940c8530c98022c409c (diff)
parent56afdb70ca9140cdcbdcf01870f3e4e2e8be17f5 (diff)
downloadlinux-0055dc5b23cc1738fc2f14221cf922a83057d8fb.tar.bz2
Merge tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "Only one framework update this time around, a change from Lars-Peter to move full to pm_ops and remove the legacy bus PM ops. Otherwise it's all driver updates: - make the spidev driver complain loudly if registered as spidev with DT rather than with a compatible string, hopefully helping people avoid making that mistake. - error handling and robustness fixes for the Designware and Intel MID drivers from Andy Shevchenko. - substantial performance improvements for the Raspberry Pi driver from Martin Sperl. - several new features for spidev_test from Adrian Remonda and Ian Abbott" * tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits) spi: bcm2835: enabling polling mode for transfers shorter than 30us spi: bcm2835: transform native-cs to gpio-cs on first spi_setup spi: img-spfi: Control CS lines with GPIO spi: img-spfi: Reset controller after each message spi: img-spfi: Implement a handle_err() callback spi: img-spfi: Setup TRANSACTION register before CONTROL register spi: Make master->handle_err() callback optional to avoid crashes spi: img-spfi: Limit bit clock to 1/4th of input clock spi: img-spfi: Implement a prepare_message() callback spi: fsl-dspi: Add ~50ns delay between cs and sck spi: fsl-dspi: Add cs-sck delays spi: fsl-dspi: Fix clock rate scale values spi: signedness bug in qspi_trigger_transfer_out_int() spi: imx: read back the RX/TX watermark levels earlier spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers() spi: bitbang: only toggle bitchanges spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() spi: fsl-dspi: Fix clock rate scale values spi: Using Trigger number to transmit/receive data spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt12
-rw-r--r--Documentation/devicetree/bindings/spi/qcom,spi-qup.txt8
-rw-r--r--Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt8
-rw-r--r--Documentation/devicetree/bindings/spi/spi-img-spfi.txt1
-rw-r--r--Documentation/devicetree/bindings/spi/spi-rockchip.txt4
-rw-r--r--Documentation/spi/spi-summary3
-rw-r--r--Documentation/spi/spidev_test.c115
7 files changed, 128 insertions, 23 deletions
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index aad527b357a0..523341a0e113 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -2,11 +2,21 @@
(CSPI/eCSPI) for i.MX
Required properties:
-- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi"
+- compatible :
+ - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1
+ - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21
+ - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27
+ - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
+ - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
+ - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
- reg : Offset and length of the register set for the device
- interrupts : Should contain CSPI/eCSPI interrupt
- fsl,spi-num-chipselects : Contains the number of the chipselect
- cs-gpios : Specifies the gpio pins to be used for chipselects.
+- clocks : Clock specifiers for both ipg and per clocks.
+- clock-names : Clock names should include both "ipg" and "per"
+See the clock consumer binding,
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "tx" and "rx" if present.
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
index e2c88df2cc15..5c090771c016 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -33,6 +33,11 @@ Optional properties:
nodes. If unspecified, a single SPI device without a chip
select can be used.
+- dmas: Two DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+- dma-names: Names for the dma channels, if present. There must be at
+ least one channel named "tx" for transmit and named "rx" for
+ receive.
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -51,6 +56,9 @@ Example:
clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ dmas = <&blsp1_bam 13>, <&blsp1_bam 12>;
+ dma-names = "rx", "tx";
+
pinctrl-names = "default";
pinctrl-0 = <&spi8_default>;
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index cbbe16ed3874..70af78a9185e 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -16,6 +16,12 @@ Optional property:
in big endian mode, otherwise in native mode(same with CPU), for more
detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
+Optional SPI slave node properties:
+- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
+ select and the start of clock signal, at the start of a transfer.
+- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
+ signal and deactivating chip select, at the end of a transfer.
+
Example:
dspi0@4002c000 {
@@ -43,6 +49,8 @@ dspi0@4002c000 {
reg = <0>;
linux,modalias = "m25p80";
modal = "at26df081a";
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
};
};
diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
index c7dd50fb8eb2..e02fbf18c82c 100644
--- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
@@ -14,6 +14,7 @@ Required properties:
- dma-names: Must include the following entries:
- rx
- tx
+- cs-gpios: Must specify the GPIOs used for chipselect lines.
- #address-cells: Must be 1.
- #size-cells: Must be 0.
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
index 467dec441c62..0c491bda4c65 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt
@@ -24,6 +24,9 @@ Optional Properties:
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "tx" and "rx" if present.
+- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
+ Rx data (may need to be fine tuned for high capacitance lines).
+ No delay (0) by default.
Example:
@@ -33,6 +36,7 @@ Example:
reg = <0xff110000 0x1000>;
dmas = <&pdma1 11>, <&pdma1 12>;
dma-names = "tx", "rx";
+ rx-sample-delay-ns = <10>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index d29734bff28c..d1824b399b2d 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -342,12 +342,11 @@ SPI protocol drivers somewhat resemble platform device drivers:
.driver = {
.name = "CHIP",
.owner = THIS_MODULE,
+ .pm = &CHIP_pm_ops,
},
.probe = CHIP_probe,
.remove = CHIP_remove,
- .suspend = CHIP_suspend,
- .resume = CHIP_resume,
};
The driver core will automatically attempt to bind this driver to any SPI
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index 3a2f9d59edab..94f574b0fdb2 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -15,6 +15,7 @@
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
+#include <string.h>
#include <getopt.h>
#include <fcntl.h>
#include <sys/ioctl.h>
@@ -34,24 +35,79 @@ static uint32_t mode;
static uint8_t bits = 8;
static uint32_t speed = 500000;
static uint16_t delay;
+static int verbose;
-static void transfer(int fd)
+uint8_t default_tx[] = {
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x40, 0x00, 0x00, 0x00, 0x00, 0x95,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xF0, 0x0D,
+};
+
+uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, };
+char *input_tx;
+
+static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix)
+{
+ int i = 0;
+ const unsigned char *address = src;
+ const unsigned char *line = address;
+ unsigned char c;
+
+ printf("%s | ", prefix);
+ while (length-- > 0) {
+ printf("%02X ", *address++);
+ if (!(++i % line_size) || (length == 0 && i % line_size)) {
+ if (length == 0) {
+ while (i++ % line_size)
+ printf("__ ");
+ }
+ printf(" | "); /* right close */
+ while (line < address) {
+ c = *line++;
+ printf("%c", (c < 33 || c == 255) ? 0x2E : c);
+ }
+ printf("\n");
+ if (length > 0)
+ printf("%s | ", prefix);
+ }
+ }
+}
+
+/*
+ * Unescape - process hexadecimal escape character
+ * converts shell input "\x23" -> 0x23
+ */
+int unespcape(char *_dst, char *_src, size_t len)
+{
+ int ret = 0;
+ char *src = _src;
+ char *dst = _dst;
+ unsigned int ch;
+
+ while (*src) {
+ if (*src == '\\' && *(src+1) == 'x') {
+ sscanf(src + 2, "%2x", &ch);
+ src += 4;
+ *dst++ = (unsigned char)ch;
+ } else {
+ *dst++ = *src++;
+ }
+ ret++;
+ }
+ return ret;
+}
+
+static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len)
{
int ret;
- uint8_t tx[] = {
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0x40, 0x00, 0x00, 0x00, 0x00, 0x95,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xDE, 0xAD, 0xBE, 0xEF, 0xBA, 0xAD,
- 0xF0, 0x0D,
- };
- uint8_t rx[ARRAY_SIZE(tx)] = {0, };
+
struct spi_ioc_transfer tr = {
.tx_buf = (unsigned long)tx,
.rx_buf = (unsigned long)rx,
- .len = ARRAY_SIZE(tx),
+ .len = len,
.delay_usecs = delay,
.speed_hz = speed,
.bits_per_word = bits,
@@ -76,12 +132,9 @@ static void transfer(int fd)
if (ret < 1)
pabort("can't send spi message");
- for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
- if (!(ret % 6))
- puts("");
- printf("%.2X ", rx[ret]);
- }
- puts("");
+ if (verbose)
+ hex_dump(tx, len, 32, "TX");
+ hex_dump(rx, len, 32, "RX");
}
static void print_usage(const char *prog)
@@ -97,6 +150,8 @@ static void print_usage(const char *prog)
" -L --lsb least significant bit first\n"
" -C --cs-high chip select active high\n"
" -3 --3wire SI/SO signals shared\n"
+ " -v --verbose Verbose (show tx buffer)\n"
+ " -p Send data (e.g. \"1234\\xde\\xad\")\n"
" -N --no-cs no chip select\n"
" -R --ready slave pulls low to pause\n"
" -2 --dual dual transfer\n"
@@ -121,12 +176,13 @@ static void parse_opts(int argc, char *argv[])
{ "no-cs", 0, 0, 'N' },
{ "ready", 0, 0, 'R' },
{ "dual", 0, 0, '2' },
+ { "verbose", 0, 0, 'v' },
{ "quad", 0, 0, '4' },
{ NULL, 0, 0, 0 },
};
int c;
- c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24", lopts, NULL);
+ c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL);
if (c == -1)
break;
@@ -165,9 +221,15 @@ static void parse_opts(int argc, char *argv[])
case 'N':
mode |= SPI_NO_CS;
break;
+ case 'v':
+ verbose = 1;
+ break;
case 'R':
mode |= SPI_READY;
break;
+ case 'p':
+ input_tx = optarg;
+ break;
case '2':
mode |= SPI_TX_DUAL;
break;
@@ -191,6 +253,9 @@ int main(int argc, char *argv[])
{
int ret = 0;
int fd;
+ uint8_t *tx;
+ uint8_t *rx;
+ int size;
parse_opts(argc, argv);
@@ -235,7 +300,17 @@ int main(int argc, char *argv[])
printf("bits per word: %d\n", bits);
printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000);
- transfer(fd);
+ if (input_tx) {
+ size = strlen(input_tx+1);
+ tx = malloc(size);
+ rx = malloc(size);
+ size = unespcape((char *)tx, input_tx, size);
+ transfer(fd, tx, rx, size);
+ free(rx);
+ free(tx);
+ } else {
+ transfer(fd, default_tx, default_rx, sizeof(default_tx));
+ }
close(fd);