Merge tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big pull request for USB and PHY drivers for 4.7-rc1

  Full details in the shortlog, but it's the normal major gadget driver
  updates, phy updates, new usbip code, as well as a bit of lots of
  other stuff.

  All have been in linux-next with no reported issues"

* tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits)
  USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support
  USB: serial: fix minor-number allocation
  USB: serial: quatech2: fix use-after-free in probe error path
  USB: serial: mxuport: fix use-after-free in probe error path
  USB: serial: keyspan: fix debug and error messages
  USB: serial: keyspan: fix URB unlink
  USB: serial: keyspan: fix use-after-free in probe error path
  USB: serial: io_edgeport: fix memory leaks in probe error path
  USB: serial: io_edgeport: fix memory leaks in attach error path
  usb: Remove unnecessary space before operator ','.
  usb: Remove unnecessary space before open square bracket.
  USB: FHCI: avoid redundant condition
  usb: host: xhci-rcar: Avoid long wait in xhci_reset()
  usb/host/fotg210: remove dead code in create_sysfs_files
  usb: wusbcore: Do not initialise statics to 0.
  usb: wusbcore: Remove space before ',' and '(' .
  USB: serial: cp210x: clean up CRTSCTS flag code
  USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code
  USB: serial: cp210x: fix hardware flow-control disable
  USB: serial: option: add even more ZTE device ids
  ...

10 files changed, 113 insertions, 20 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-usbip-vudc b/Documentation/ABI/testing/sysfs-platform-usbip-vudc
new file mode 100644
index 000000000000..81fcfb454913
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-usbip-vudc
@@ -0,0 +1,35 @@
+What:		/sys/devices/platform/usbip-vudc.%d/dev_desc
+Date:		April 2016
+KernelVersion:	4.6
+Contact:	Krzysztof Opasiak <k.opasiak@samsung.com>
+Description:
+		This file allows to read device descriptor of
+		gadget driver which is currently bound to this
+		controller. It is possible to read this file
+		only if gadget driver is bound, otherwise error
+		is returned.
+
+What:		/sys/devices/platform/usbip-vudc.%d/usbip_status
+Date:		April 2016
+KernelVersion:	4.6
+Contact:	Krzysztof Opasiak <k.opasiak@samsung.com>
+Description:
+		Current status of the device.
+		Allowed values:
+		1 - Device is available and can be exported
+		2 - Device is currently exported
+		3 - Fatal error occurred during communication
+		  with peer
+
+What:		/sys/devices/platform/usbip-vudc.%d/usbip_sockfd
+Date:		April 2016
+KernelVersion:	4.6
+Contact:	Krzysztof Opasiak <k.opasiak@samsung.com>
+Description:
+		This file allows to export usb device to
+		connection peer. It is done by writing to this
+		file socket fd (as a string for example "8")
+		associated with a connection to remote peer who
+		would like to use this device. It is possible to
+		close the connection by writing -1 instead of
+		socked fd.
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
new file mode 100644
index 000000000000..a7aee9ea8926
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
@@ -0,0 +1,21 @@
+Driver for Broadcom Northstar USB 2.0 PHY
+
+Required properties:
+- compatible: brcm,ns-usb2-phy
+- reg: iomem address range of DMU (Device Management Unit)
+- reg-names: "dmu", the only needed & supported reg right now
+- clocks: USB PHY reference clock
+- clock-names: "phy-ref-clk", the only needed & supported clock right now
+
+To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
+requires passing phandle to the USB PHY reference clock.
+
+Example:
+	usb2-phy {
+		compatible = "brcm,ns-usb2-phy";
+		reg = <0x1800c000 0x1000>;
+		reg-names = "dmu";
+		#phy-cells = <0>;
+		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+		clock-names = "phy-ref-clk";
+	};
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index d87ab7c127b8..d0231209d846 100644
--- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -1,14 +1,17 @@
-* Broadcom SATA3 PHY for STB
+* Broadcom SATA3 PHY
 
 Required properties:
 - compatible: should be one or more of
      "brcm,bcm7425-sata-phy"
      "brcm,bcm7445-sata-phy"
+     "brcm,iproc-ns2-sata-phy"
      "brcm,phy-sata3"
 - address-cells: should be 1
 - size-cells: should be 0
-- reg: register range for the PHY PCB interface
-- reg-names: should be "phy"
+- reg: register ranges for the PHY PCB interface
+- reg-names: should be "phy" and "phy-ctrl"
+     The "phy-ctrl" registers are only required for
+     "brcm,iproc-ns2-sata-phy".
 
 Sub-nodes:
   Each port's PHY should be represented as a sub-node.
@@ -16,12 +19,12 @@ Sub-nodes:
 Sub-nodes required properties:
 - reg: the PHY number
 - phy-cells: generic PHY binding; must be 0
-Optional:
-- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
 
+Sub-nodes optional properties:
+- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
+     This property is not applicable for "brcm,iproc-ns2-sata-phy".
 
 Example:
-
 	sata-phy@f0458100 {
 		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
 		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
index 00100cf3e037..33a2b1ee3f3e 100644
--- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
@@ -4,7 +4,9 @@ mt65xx USB3.0 PHY binding
 This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
 
 Required properties (controller (parent) node):
- - compatible	: should be "mediatek,mt8173-u3phy"
+ - compatible	: should be one of
+		  "mediatek,mt2701-u3phy"
+		  "mediatek,mt8173-u3phy"
  - reg		: offset and length of register for phy, exclude port's
 		  register.
  - clocks	: a list of phandle + clock-specifier pairs, one for each
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index d564ba4f1cf6..91da947ae9b6 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -7,6 +7,12 @@ Required properties:
 - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
 	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
 	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
+	      "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device.
+
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
 - reg: offset and length of the register block.
 - #address-cells: number of address cells for the USB channel subnodes, must
 		  be <1>.
@@ -34,7 +40,7 @@ the USB channel; see the selector meanings below:
 Example (Lager board):
 
 	usb-phy@e6590100 {
-		compatible = "renesas,usb-phy-r8a7790";
+		compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy";
 		reg = <0 0xe6590100 0 0x100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index eaf7e9b7ce6b..2281d6cdecb1 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -6,6 +6,12 @@ This file provides information on what the device node for the R-Car generation
 Required properties:
 - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
 	      SoC.
+	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
+
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
 - reg: offset and length of the partial USB 2.0 Host register block.
 - clocks: clock phandle and specifier pair(s).
 - #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
@@ -15,18 +21,20 @@ To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
 combined, the device tree node should set interrupt properties to use the
 channel as USB OTG:
 - interrupts: interrupt specifier for the PHY.
+- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
+	       regulator will be managed during the PHY power on/off sequence.
 
 Example (R-Car H3):
 
 	usb-phy@ee080200 {
-		compatible = "renesas,usb2-phy-r8a7795";
+		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
 		reg = <0 0xee080200 0 0x700>;
 		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
 	};
 
 	usb-phy@ee0a0200 {
-		compatible = "renesas,usb2-phy-r8a7795";
+		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
 		reg = <0 0xee0a0200 0 0x700>;
 		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
 	};
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index 0289d3b07853..9872ba8546bd 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -2,9 +2,20 @@ Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
 -------------------------------------------------
 
 Required properties:
-- compatible : should be "samsung,s5pv210-mipi-video-phy";
+- compatible : should be one of the listed compatibles:
+	- "samsung,s5pv210-mipi-video-phy"
+	- "samsung,exynos5420-mipi-video-phy"
+	- "samsung,exynos5433-mipi-video-phy"
 - #phy-cells : from the generic phy bindings, must be 1;
-- syscon - phandle to the PMU system controller;
+
+In case of s5pv210 and exynos5420 compatible PHYs:
+- syscon - phandle to the PMU system controller
+
+In case of exynos5433 compatible PHY:
+ - samsung,pmu-syscon - phandle to the PMU system controller
+ - samsung,disp-sysreg - phandle to the DISP system registers controller
+ - samsung,cam0-sysreg - phandle to the CAM0 system registers controller
+ - samsung,cam1-sysreg - phandle to the CAM1 system registers controller
 
 For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
 the PHY specifier identifies the PHY and its meaning is as follows:
@@ -12,6 +23,9 @@ the PHY specifier identifies the PHY and its meaning is as follows:
   1 - MIPI DSIM 0,
   2 - MIPI CSIS 1,
   3 - MIPI DSIM 1.
+"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy"
+supports additional fifth PHY:
+  4 - MIPI CSIS 2.
 
 Samsung EXYNOS SoC series Display Port PHY
 -------------------------------------------------
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index fb2ad0acedbd..7d7ce089b003 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -14,7 +14,6 @@ Optional properties:
    the second element is expected to be a handle to the USB3/SS PHY
  - phys: from the *Generic PHY* bindings
  - phy-names: from the *Generic PHY* bindings
- - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
  - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable
  - snps,disable_scramble_quirk: true when SW should disable data scrambling.
 	Only really useful for FPGA builds.
@@ -38,6 +37,8 @@ Optional properties:
  - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
  - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG,
 			disabling the suspend signal to the PHY.
+ - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection
+			in PHY P3 power state.
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
 			utmi_l1_suspend_n, false when asserts utmi_sleep_n
  - snps,hird-threshold: HIRD threshold
@@ -47,6 +48,8 @@ Optional properties:
 	register for post-silicon frame length adjustment when the
 	fladj_30mhz_sdbnd signal is invalid or incorrect.
 
+ - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+
 This is usually a subnode to DWC3 glue to which it is connected.
 
 dwc3@4a030000 {
@@ -54,5 +57,4 @@ dwc3@4a030000 {
 	reg = <0x4a030000 0xcfff>;
 	interrupts = <0 92 4>
 	usb-phy = <&usb2_phy>, <&usb3,phy>;
-	tx-fifo-resize;
 };
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
index ca164e71dd50..39acb084bce9 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -59,7 +59,6 @@ Example device nodes:
 				interrupts = <0 205 0x4>;
 				phys = <&hs_phy>, <&ss_phy>;
 				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
 				dr_mode = "host";
 			};
 		};
diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt
index 678741b0f213..edf7cdfddc88 100644
--- a/Documentation/usb/chipidea.txt
+++ b/Documentation/usb/chipidea.txt
@@ -3,14 +3,17 @@
 To show how to demo OTG HNP and SRP functions via sys input files
 with 2 Freescale i.MX6Q sabre SD boards.
 
-1.1 How to enable OTG FSM in menuconfig
+1.1 How to enable OTG FSM
 ---------------------------------------
-Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules.
-If you want to check some internal variables for otg fsm,
-mount debugfs, there are 2 files which can show otg fsm
-variables and some controller registers value:
+1.1.1 Select CONFIG_USB_OTG_FSM in menuconfig, rebuild kernel
+Image and modules. If you want to check some internal
+variables for otg fsm, mount debugfs, there are 2 files
+which can show otg fsm variables and some controller registers value:
 cat /sys/kernel/debug/ci_hdrc.0/otg
 cat /sys/kernel/debug/ci_hdrc.0/registers
+1.1.2 Add below entries in your dts file for your controller node
+	otg-rev = <0x0200>;
+	adp-disable;
 
 1.2 Test operations
 -------------------