summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-02-11 12:05:55 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-02-11 12:05:55 -0800
commit16e5a2ed5920f511666a8714f43987bb0e2ad751 (patch)
tree318c36ed6e45733b9ef0e0d9c498df99d40eab93 /Documentation
parent6792dfe383dd20ed270da198aa0676bac47245b4 (diff)
parent20e7c4e80dcd01dad5e6c8b32455228b8fe9c619 (diff)
downloadlinux-16e5a2ed5920f511666a8714f43987bb0e2ad751.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking updates from David Miller: 1) Fix flexcan build on big endian, from Arnd Bergmann 2) Correctly attach cpsw to GPIO bitbang MDIO drive, from Stefan Roese 3) udp_add_offload has to use GFP_ATOMIC since it can be invoked from non-sleepable contexts. From Or Gerlitz 4) vxlan_gro_receive() does not iterate over all possible flows properly, fix also from Or Gerlitz 5) CAN core doesn't use a proper SKB destructor when it hooks up sockets to SKBs. Fix from Oliver Hartkopp 6) ip_tunnel_xmit() can use an uninitialized route pointer, fix from Eric Dumazet 7) Fix address family assignment in IPVS, from Michal Kubecek 8) Fix ath9k build on ARM, from Sujith Manoharan 9) Make sure fail_over_mac only applies for the correct bonding modes, from Ding Tianhong 10) The udp offload code doesn't use RCU correctly, from Shlomo Pongratz 11) Handle gigabit features properly in generic PHY code, from Florian Fainelli 12) Don't blindly invoke link operations in rtnl_link_get_slave_info_data_size, they are optional. Fix from Fernando Luis Vazquez Cao 13) Add USB IDs for Netgear Aircard 340U, from Bjørn Mork 14) Handle netlink packet padding properly in openvswitch, from Thomas Graf 15) Fix oops when deleting chains in nf_tables, from Patrick McHardy 16) Fix RX stalls in xen-netback driver, from Zoltan Kiss 17) Fix deadlock in mac80211 stack, from Emmanuel Grumbach 18) inet_nlmsg_size() forgets to consider ifa_cacheinfo, fix from Geert Uytterhoeven 19) tg3_change_mtu() can deadlock, fix from Nithin Sujir 20) Fix regression in setting SCTP local source addresses on accepted sockets, caused by some generic ipv6 socket changes. Fix from Matija Glavinic Pecotic 21) IPPROTO_* must be pure defines, otherwise module aliases don't get constructed properly. Fix from Jan Moskyto 22) IPV6 netconsole setup doesn't work properly unless an explicit source address is specified, fix from Sabrina Dubroca 23) Use __GFP_NORETRY for high order skb page allocations in sock_alloc_send_pskb and skb_page_frag_refill. From Eric Dumazet 24) Fix a regression added in netconsole over bridging, from Cong Wang 25) TCP uses an artificial offset of 1ms for SRTT, but this doesn't jive well with TCP pacing which needs the SRTT to be accurate. Fix from Eric Dumazet 26) Several cases of missing header file includes from Rashika Kheria 27) Add ZTE MF667 device ID to qmi_wwan driver, from Raymond Wanyoike 28) TCP Small Queues doesn't handle nonagle properly in some corner cases, fix from Eric Dumazet 29) Remove extraneous read_unlock in bond_enslave, whoops. From Ding Tianhong 30) Fix 9p trans_virtio handling of vmalloc buffers, from Richard Yao * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (136 commits) 6lowpan: fix lockdep splats alx: add missing stats_lock spinlock init 9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers bonding: remove unwanted bond lock for enslave processing USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support tcp: tsq: fix nonagle handling bridge: Prevent possible race condition in br_fdb_change_mac_address bridge: Properly check if local fdb entry can be deleted when deleting vlan bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address bridge: Fix the way to check if a local fdb entry can be deleted bridge: Change local fdb entries whenever mac address of bridge device changes bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min net: vxge: Remove unused device pointer net: qmi_wwan: add ZTE MF667 3c59x: Remove unused pointer in vortex_eisa_cleanup() net: fix 'ip rule' iif/oif device rename ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt5
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt5
-rw-r--r--Documentation/ptp/testptp.c11
3 files changed, 14 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
index b90bfcd138ff..863d5b8155c7 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt
@@ -1,7 +1,8 @@
* Allwinner EMAC ethernet controller
Required properties:
-- compatible: should be "allwinner,sun4i-emac".
+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
+ "allwinner,sun4i-emac")
- reg: address and length of the register set for the device.
- interrupts: interrupt for the device
- phy: A phandle to a phy node defining the PHY address (as the reg
@@ -14,7 +15,7 @@ Optional properties:
Example:
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
index 00b9f9a3ec1d..4ec56413779d 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt
@@ -1,7 +1,8 @@
* Allwinner A10 MDIO Ethernet Controller interface
Required properties:
-- compatible: should be "allwinner,sun4i-mdio".
+- compatible: should be "allwinner,sun4i-a10-mdio"
+ (Deprecated: "allwinner,sun4i-mdio").
- reg: address and length of the register set for the device.
Optional properties:
@@ -9,7 +10,7 @@ Optional properties:
Example at the SoC level:
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c
index a74d0a84d329..4aba0436da65 100644
--- a/Documentation/ptp/testptp.c
+++ b/Documentation/ptp/testptp.c
@@ -117,6 +117,7 @@ static void usage(char *progname)
" -f val adjust the ptp clock frequency by 'val' ppb\n"
" -g get the ptp clock time\n"
" -h prints this message\n"
+ " -i val index for event/trigger\n"
" -k val measure the time offset between system and phc clock\n"
" for 'val' times (Maximum 25)\n"
" -p val enable output with a period of 'val' nanoseconds\n"
@@ -154,6 +155,7 @@ int main(int argc, char *argv[])
int capabilities = 0;
int extts = 0;
int gettime = 0;
+ int index = 0;
int oneshot = 0;
int pct_offset = 0;
int n_samples = 0;
@@ -167,7 +169,7 @@ int main(int argc, char *argv[])
progname = strrchr(argv[0], '/');
progname = progname ? 1+progname : argv[0];
- while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghk:p:P:sSt:v"))) {
+ while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:p:P:sSt:v"))) {
switch (c) {
case 'a':
oneshot = atoi(optarg);
@@ -190,6 +192,9 @@ int main(int argc, char *argv[])
case 'g':
gettime = 1;
break;
+ case 'i':
+ index = atoi(optarg);
+ break;
case 'k':
pct_offset = 1;
n_samples = atoi(optarg);
@@ -301,7 +306,7 @@ int main(int argc, char *argv[])
if (extts) {
memset(&extts_request, 0, sizeof(extts_request));
- extts_request.index = 0;
+ extts_request.index = index;
extts_request.flags = PTP_ENABLE_FEATURE;
if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
perror("PTP_EXTTS_REQUEST");
@@ -375,7 +380,7 @@ int main(int argc, char *argv[])
return -1;
}
memset(&perout_request, 0, sizeof(perout_request));
- perout_request.index = 0;
+ perout_request.index = index;
perout_request.start.sec = ts.tv_sec + 2;
perout_request.start.nsec = 0;
perout_request.period.sec = 0;