summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-02-09 13:36:20 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-02-09 13:36:20 -0800
commitb0c1936c4497d7f06b143241614d85a41fec12cd (patch)
tree82a527fc80f35ff3e110145a233e2d437734a71a /Documentation
parentf381f906955a2b0619b5557cc53aafcc7ef27be8 (diff)
parent66886337bf2a523aef76cff84c846335db5f85f9 (diff)
downloadlinux-b0c1936c4497d7f06b143241614d85a41fec12cd.tar.bz2
Merge tag 'spi-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "The major highlight this release is a refactoring of the core to allow us to run synchronous transfers in the context of the caller when there is no contention for the bus. This improves performance in the very common case by eliminating context switches and reducing the number of hardware setup and teardown operations we need to perform. Other changes: - New drivers for DLN-2 USB-SPI adapter and ST SPI controllers. - A big round of cleanups, performance and feature improvements for the xilinx driver from Ricardo Ribalda Delgado. - A wide range of smaller cleanups, fixes and feature improvements throughout the subsystem" * tag 'spi-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits) spi: mxs: cleanup wait_for_completion return handling spi: ti-qspi: cleanup wait_for_completion return handling spi: spi-imx: cleanup wait_for_completion handling spi: sh-msiof: cleanup wait_for_completion return handling spi: match var type to return type of wait_for_completion spi: spi-pxa2xx: only include mach/dma.h for legacy DMA spi: atmel: cleanup wait_for_completion return handling spi: fsl-dspi: Remove possible memory leak of 'chip' spi: sh-msiof: Update calculation of frequency dividing spi: spidev: Convert buf pointers for 32-bit compat SPI_IOC_MESSAGE(n) spi/xilinx: Fix access invalid memory on xilinx_spi_tx spi: Revert "spi/xilinx: Remove iowrite/ioread wrappers" spi/xilinx: Check number of slaves range spi/xilinx: Use polling mode on small transfers spi/xilinx: Remove remaining_words driver data variable spi/xilinx: Remove iowrite/ioread wrappers spi/xilinx: Convert bits_per_word in bytes_per_word spi/xilinx: Convert remainding_bytes in remaining words spi/xilinx: Make spi_tx and spi_rx simmetric spi/xilinx: Remove rx_fn and tx_fn pointer ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/spi/sh-msiof.txt16
-rw-r--r--Documentation/devicetree/bindings/spi/spi-sirf.txt41
-rw-r--r--Documentation/devicetree/bindings/spi/spi-st-ssc.txt40
3 files changed, 97 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt
index d11c3721e7cd..4c388bb2f0a2 100644
--- a/Documentation/devicetree/bindings/spi/sh-msiof.txt
+++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt
@@ -30,6 +30,22 @@ Optional properties:
specifiers, one for transmission, and one for
reception.
- dma-names : Must contain a list of two DMA names, "tx" and "rx".
+- renesas,dtdl : delay sync signal (setup) in transmit mode.
+ Must contain one of the following values:
+ 0 (no bit delay)
+ 50 (0.5-clock-cycle delay)
+ 100 (1-clock-cycle delay)
+ 150 (1.5-clock-cycle delay)
+ 200 (2-clock-cycle delay)
+
+- renesas,syncdl : delay sync signal (hold) in transmit mode.
+ Must contain one of the following values:
+ 0 (no bit delay)
+ 50 (0.5-clock-cycle delay)
+ 100 (1-clock-cycle delay)
+ 150 (1.5-clock-cycle delay)
+ 200 (2-clock-cycle delay)
+ 300 (3-clock-cycle delay)
Optional properties, deprecated for soctype-specific bindings:
- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
diff --git a/Documentation/devicetree/bindings/spi/spi-sirf.txt b/Documentation/devicetree/bindings/spi/spi-sirf.txt
new file mode 100644
index 000000000000..4c7adb8f777c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sirf.txt
@@ -0,0 +1,41 @@
+* CSR SiRFprimaII Serial Peripheral Interface
+
+Required properties:
+- compatible : Should be "sirf,prima2-spi"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI interrupt
+- resets: phandle to the reset controller asserting this device in
+ reset
+ See ../reset/reset.txt for details.
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+
+- #address-cells: Number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: Should be zero.
+
+Optional properties:
+- spi-max-frequency: Specifies maximum SPI clock frequency,
+ Units - Hz. Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+- cs-gpios: should specify GPIOs used for chipselects.
+
+Example:
+
+spi0: spi@b00d0000 {
+ compatible = "sirf,prima2-spi";
+ reg = <0xb00d0000 0x10000>;
+ interrupts = <15>;
+ dmas = <&dmac1 9>,
+ <&dmac1 4>;
+ dma-names = "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clks 19>;
+ resets = <&rstc 26>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
new file mode 100644
index 000000000000..fe54959ec957
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
@@ -0,0 +1,40 @@
+STMicroelectronics SSC (SPI) Controller
+---------------------------------------
+
+Required properties:
+- compatible : "st,comms-ssc4-spi"
+- reg : Offset and length of the device's register set
+- interrupts : The interrupt specifier
+- clock-names : Must contain "ssc"
+- clocks : Must contain an entry for each name in clock-names
+ See ../clk/*
+- pinctrl-names : Uses "default", can use "sleep" if provided
+ See ../pinctrl/pinctrl-binding.txt
+
+Optional properties:
+- cs-gpios : List of GPIO chip selects
+ See ../spi/spi-bus.txt
+
+Child nodes represent devices on the SPI bus
+ See ../spi/spi-bus.txt
+
+Example:
+ spi@9840000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9840000 0x110>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ pinctrl-names = "default";
+ cs-gpios = <&pio17 5 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ st95hf@0{
+ compatible = "st,st95hf";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };