summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorKevin Hilman <khilman@linaro.org>2015-07-01 12:25:13 -0700
committerKevin Hilman <khilman@linaro.org>2015-07-01 12:25:13 -0700
commit593aae214240d44bdb8ae3ebf38451812a92b9a6 (patch)
treece6826b676473115c1de02760717628f4207f2e1 /Documentation
parentea21feb37e753213a093e1f77b2c05ce57997ccd (diff)
parent63e63a1981c7247fea41ce97b3144befc8f2fb7b (diff)
downloadlinux-593aae214240d44bdb8ae3ebf38451812a92b9a6.tar.bz2
Merge tag 'omap-for-v4.2/wakeirq-drivers-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/late
Merge "omap generic wakeirq for v4.2 merge window" from Tony Lindgren: Omap driver changes for v4.2 to switch drivers over to Linux generic wake IRQ events for omap_hsmmc, 8250_omap and omap-serial drivers. The generic wake IRQs also fix issues that these drivers potentially have with IRQ re-entrancy at least for serial-omap. Note that because of dependencies and merge conflicts these are based on Rafael's pm-wakeirq and Greg's tty-next branches. * tag 'omap-for-v4.2/wakeirq-drivers-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (148 commits) serial: 8250_omap: Move wake-up interrupt to generic wakeirq serial: omap: Switch wake-up interrupt to generic wakeirq tty: move linux/gsmmux.h to uapi doc: dt: add documentation for nxp,lpc1850-uart serial: 8250: add LPC18xx/43xx UART driver serial: 8250_uniphier: add UniPhier serial driver serial: 8250_dw: support ACPI platforms with integrated DMA engine serial: of_serial: check the return value of clk_prepare_enable() serial: of_serial: use devm_clk_get() instead of clk_get() serial: earlycon: Add support for big-endian MMIO accesses serial: sirf: use hrtimer for data rx serial: sirf: correct the fifo empty_bit serial: sirf: fix system hung on console log output serial: 8250: remove return statements from void function sc16is7xx: use kworker for RS-485 configuration sc16is7xx: use kworker to update ier bits sc16is7xx: use kworker for md_proc sc16is7xx: move RTS delay to workqueue sc16is7xx: use kthread_worker for tx_work and irq sc16is7xx: use LSR_TEMT_BIT in .tx_empty() ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt10
-rw-r--r--Documentation/devicetree/bindings/serial/mtk-uart.txt12
-rw-r--r--Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt28
-rw-r--r--Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt37
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt7
-rw-r--r--Documentation/devicetree/bindings/serial/sirf-uart.txt15
-rw-r--r--Documentation/kernel-parameters.txt9
-rw-r--r--Documentation/power/runtime_pm.txt6
8 files changed, 104 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
new file mode 100644
index 000000000000..4163e7eb7763
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
@@ -0,0 +1,10 @@
+* ARM SBSA defined generic UART
+This UART uses a subset of the PL011 registers and consequently lives
+in the PL011 driver. It's baudrate and other communication parameters
+cannot be adjusted at runtime, so it lacks a clock specifier here.
+
+Required properties:
+- compatible: must be "arm,sbsa-uart"
+- reg: exactly one register range
+- interrupts: exactly one interrupt specifier
+- current-speed: the (fixed) baud rate set by the firmware
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 44152261e5c5..8d63f1da07aa 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -14,7 +14,14 @@ Required properties:
- interrupts: A single interrupt specifier.
-- clocks: Clock driving the hardware.
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names:
+ - "baud": The clock the baudrate is derived from
+ - "bus": The bus clock for register accesses (optional)
+
+For compatibility with older device trees an unnamed clock is used for the
+baud clock if the baudclk does not exist. Do not use this for new designs.
Example:
@@ -22,5 +29,6 @@ Example:
compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
reg = <0x11006000 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&uart_clk>, <&bus_clk>;
+ clock-names = "baud", "bus";
};
diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
new file mode 100644
index 000000000000..04e23e63ee4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
@@ -0,0 +1,28 @@
+* NXP LPC1850 UART
+
+Required properties:
+- compatible : "nxp,lpc1850-uart", "ns16550a".
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clocks : phandle to the input clocks.
+- clock-names : required elements: "uartclk", "reg".
+
+Optional properties:
+- dmas : Two or more DMA channel specifiers following the
+ convention outlined in bindings/dma/dma.txt
+- dma-names : Names for the dma channels, if present. There must
+ be at least one channel named "tx" for transmit
+ and named "rx" for receive.
+
+Since it's also possible to also use the of_serial.c driver all
+parameters from 8250.txt also apply but are optional.
+
+Example:
+uart0: serial@40081000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+ clock-names = "uartclk", "reg";
+};
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index 246c795668dc..fbfe53635a3a 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -1,4 +1,5 @@
* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
+* i2c as bus
Required properties:
- compatible: Should be one of the following:
@@ -31,3 +32,39 @@ Example:
gpio-controller;
#gpio-cells = <2>;
};
+
+* spi as bus
+
+Required properties:
+- compatible: Should be one of the following:
+ - "nxp,sc16is740" for NXP SC16IS740,
+ - "nxp,sc16is741" for NXP SC16IS741,
+ - "nxp,sc16is750" for NXP SC16IS750,
+ - "nxp,sc16is752" for NXP SC16IS752,
+ - "nxp,sc16is760" for NXP SC16IS760,
+ - "nxp,sc16is762" for NXP SC16IS762.
+- reg: SPI chip select number.
+- interrupt-parent: The phandle for the interrupt controller that
+ services interrupts for this IC.
+- interrupts: Specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+- clocks: phandle to the IC source clock.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+ the second cell is used to specify the GPIO polarity:
+ 0 = active high,
+ 1 = active low.
+
+Example:
+ sc16is750: sc16is750@0 {
+ compatible = "nxp,sc16is750";
+ reg = <0>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index ae73bb0e9ad9..b91fcff4b7d4 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -44,6 +44,11 @@ Required properties:
Note: Each enabled SCIx UART should have an alias correctly numbered in the
"aliases" node.
+Optional properties:
+ - dmas: Must contain a list of two references to DMA specifiers, one for
+ transmission, and one for reception.
+ - dma-names: Must contain a list of two DMA names, "tx" and "rx".
+
Example:
aliases {
serial0 = &scifa0;
@@ -56,4 +61,6 @@ Example:
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+ dma-names = "tx", "rx";
};
diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt
index f0c39261c5d4..67e2a0aeb042 100644
--- a/Documentation/devicetree/bindings/serial/sirf-uart.txt
+++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt
@@ -2,8 +2,7 @@
Required properties:
- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart",
- "sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means
- uart located in BT module and used for BT.
+ "sirf,atlas7-uart" or "sirf,atlas7-usp-uart".
- reg : Offset and length of the register set for the device
- interrupts : Should contain uart interrupt
- fifosize : Should define hardware rx/tx fifo size
@@ -33,15 +32,3 @@ usp@b0090000 {
rts-gpios = <&gpio 15 0>;
cts-gpios = <&gpio 46 0>;
};
-
-for uart use in BT module,
-uart6: uart@11000000 {
- cell-index = <6>;
- compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart";
- reg = <0x11000000 0x1000>;
- interrupts = <0 100 0>;
- clocks = <&clks 138>, <&clks 140>, <&clks 141>;
- clock-names = "uart", "general", "noc";
- fifosize = <128>;
- status = "disabled";
-}
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6726139bd289..59ecd3d558c8 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -959,14 +959,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
uart[8250],mmio32,<addr>[,options]
+ uart[8250],mmio32be,<addr>[,options]
uart[8250],0x<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
MMIO inter-register address stride is either 8-bit
- (mmio) or 32-bit (mmio32).
- If none of [io|mmio|mmio32], <addr> is assumed to be
- equivalent to 'mmio'. 'options' are specified in the
- same format described for "console=ttyS<n>"; if
+ (mmio) or 32-bit (mmio32 or mmio32be).
+ If none of [io|mmio|mmio32|mmio32be], <addr> is assumed
+ to be equivalent to 'mmio'. 'options' are specified
+ in the same format described for "console=ttyS<n>"; if
unspecified, the h/w is not initialized.
pl011,<addr>
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 44fe1d28a163..e76dc0ad4d2b 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -556,6 +556,12 @@ helper functions described in Section 4. In that case, pm_runtime_resume()
should be used. Of course, for this purpose the device's runtime PM has to be
enabled earlier by calling pm_runtime_enable().
+Note, if the device may execute pm_runtime calls during the probe (such as
+if it is registers with a subsystem that may call back in) then the
+pm_runtime_get_sync() call paired with a pm_runtime_put() call will be
+appropriate to ensure that the device is not put back to sleep during the
+probe. This can happen with systems such as the network device layer.
+
It may be desirable to suspend the device once ->probe() has finished.
Therefore the driver core uses the asyncronous pm_request_idle() to submit a
request to execute the subsystem-level idle callback for the device at that