summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-05 12:59:36 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-05 12:59:36 -0800
commitf66477a0aeb77f97a7de5f791700dadc42f3f792 (patch)
tree0a49febcf211c33948be618860eb3d545b7c6608 /Documentation
parent400c5bd5a5b1faf3089322ace58b974446a8ddc3 (diff)
parente5bf1991ea62b4f4fc906d0828f7eed988fc3835 (diff)
downloadlinux-f66477a0aeb77f97a7de5f791700dadc42f3f792.tar.bz2
Merge tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "The majority of the changes are driver updates and new device support. The core framework is mostly unchanged this time around, with only a couple patches to expose a clk provider API and make getting clk parent names from DT more robust. Driver updates: - Support for clock controllers found on Broadcom Northstar SoCs and bcm2835 SoC - Support for Allwinner audio clocks - A few cleanup patches for Tegra drivers and support for the highest DFLL frequencies on Tegra124 - Samsung exynos7 fixes and improvements - i.Mx SoC updates to add a few missing clocks and keep debug uart clocks on during kernel intialization - Some mediatek cleanups and support for more subsystem clocks - Support for msm8916 gpu/audio clocks and qcom's GDSC power domain controllers - A new driver for the Silabs si514 clock chip" * tag 'clk-for-linus-20151104' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (143 commits) clk: qcom: msm8960: Fix dsi1/2 halt bits clk: lpc18xx-cgu: fix potential system hang when disabling unused clocks clk: lpc18xx-ccu: fix potential system hang when disabling unused clocks clk: Add clk_hw_is_enabled() for use by clk providers clk: Add stubs for of_clk_*() APIs when CONFIG_OF=n clk: versatile-icst: fix memory leak clk: Remove clk_{register,unregister}_multiplier() clk: iproc: define Broadcom NS2 iProc clock binding clk: iproc: define Broadcom NSP iProc clock binding clk: ns2: add clock support for Broadcom Northstar 2 SoC clk: iproc: Separate status and control variables clk: iproc: Split off dig_filter clk: iproc: Add PLL base write function clk: nsp: add clock support for Broadcom Northstar Plus SoC clk: iproc: Add PWRCTRL support clk: cygnus: Convert all macros to all caps ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled clk: imx31: add missing of_node_put clk: imx27: add missing of_node_put clk: si5351: add missing of_node_put ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt22
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt22
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt22
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt22
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt22
-rw-r--r--Documentation/devicetree/bindings/clock/at91-clock.txt35
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt45
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt78
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt69
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si514.txt24
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt1
12 files changed, 363 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
new file mode 100644
index 000000000000..b1f2ce17dff8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
@@ -0,0 +1,22 @@
+Mediatek imgsys controller
+============================
+
+The Mediatek imgsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-imgsys", "syscon"
+- #clock-cells: Must be 1
+
+The imgsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+imgsys: clock-controller@15000000 {
+ compatible = "mediatek,mt8173-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
new file mode 100644
index 000000000000..4385946eadef
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -0,0 +1,22 @@
+Mediatek mmsys controller
+============================
+
+The Mediatek mmsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-mmsys", "syscon"
+- #clock-cells: Must be 1
+
+The mmsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+mmsys: clock-controller@14000000 {
+ compatible = "mediatek,mt8173-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
new file mode 100644
index 000000000000..1faacf1c1b25
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
@@ -0,0 +1,22 @@
+Mediatek vdecsys controller
+============================
+
+The Mediatek vdecsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-vdecsys", "syscon"
+- #clock-cells: Must be 1
+
+The vdecsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vdecsys: clock-controller@16000000 {
+ compatible = "mediatek,mt8173-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
new file mode 100644
index 000000000000..3cc299fd7857
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
@@ -0,0 +1,22 @@
+Mediatek vencltsys controller
+============================
+
+The Mediatek vencltsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-vencltsys", "syscon"
+- #clock-cells: Must be 1
+
+The vencltsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vencltsys: clock-controller@19000000 {
+ compatible = "mediatek,mt8173-vencltsys", "syscon";
+ reg = <0 0x19000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
new file mode 100644
index 000000000000..5bb2866a2b50
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
@@ -0,0 +1,22 @@
+Mediatek vencsys controller
+============================
+
+The Mediatek vencsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-vencsys", "syscon"
+- #clock-cells: Must be 1
+
+The vencsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vencsys: clock-controller@18000000 {
+ compatible = "mediatek,mt8173-vencsys", "syscon";
+ reg = <0 0x18000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 5ba6450693b9..181bc8ac4e3a 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -77,6 +77,9 @@ Required properties:
"atmel,sama5d4-clk-h32mx":
at91 h32mx clock
+ "atmel,sama5d2-clk-generated":
+ at91 generated clock
+
Required properties for SCKC node:
- reg : defines the IO memory reserved for the SCKC.
- #size-cells : shall be 0 (reg is used to encode clk id).
@@ -461,3 +464,35 @@ For example:
compatible = "atmel,sama5d4-clk-h32mx";
clocks = <&mck>;
};
+
+Required properties for generated clocks:
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- clocks : shall be the generated clock source phandles.
+ e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
+- name: device tree node describing a specific generated clock.
+ * #clock-cells : from common clock binding; shall be set to 0.
+ * reg: peripheral id. See Atmel's datasheets to get a full
+ list of peripheral ids.
+ * atmel,clk-output-range : minimum and maximum clock frequency
+ (two u32 fields).
+
+For example:
+ gck {
+ compatible = "atmel,sama5d2-clk-generated";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
+
+ tcb0_gclk: tcb0_gclk {
+ #clock-cells = <0>;
+ reg = <35>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
+ pwm_gclk: pwm_gclk {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
new file mode 100644
index 000000000000..e56a1df3a9d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
@@ -0,0 +1,45 @@
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835. There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels. Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-cprman"
+- #clock-cells: Should be <1>. The permitted clock-specifier values can be
+ found in include/dt-bindings/clock/bcm2835.h
+- reg: Specifies base physical address and size of the registers
+- clocks: The external oscillator clock phandle
+
+Example:
+
+ clk_osc: clock@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <19200000>;
+ };
+
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <&clk_osc>;
+ };
+
+ i2c0: i2c@7e205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index da8d9bb5751c..ede65a55e21b 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -130,3 +130,81 @@ These clock IDs are defined in:
ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+Northstar and Northstar Plus
+------
+PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
+ "brcm,nsp-armpll"
+ "brcm,nsp-genpll"
+ "brcm,nsp-lcpll0"
+
+The following table defines the set of PLL/clock index and ID for Northstar and
+Northstar Plus. These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-nsp.h"
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+
+ armpll crystal N/A N/A
+
+ genpll crystal 0 BCM_NSP_GENPLL
+ phy genpll 1 BCM_NSP_GENPLL_PHY_CLK
+ ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK
+ usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK
+ iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK
+ sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK
+ sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK
+
+ lcpll0 crystal 0 BCM_NSP_LCPLL0
+ pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+ sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK
+ ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
+
+Northstar 2
+-----------
+PLL and leaf clock compatible strings for Northstar 2 are:
+ "brcm,ns2-genpll-scr"
+ "brcm,ns2-genpll-sw"
+ "brcm,ns2-lcpll-ddr"
+ "brcm,ns2-lcpll-ports"
+
+The following table defines the set of PLL/clock index and ID for Northstar 2.
+These clock IDs are defined in:
+ "include/dt-bindings/clock/bcm-ns2.h"
+
+ Clock Source Index ID
+ --- ----- ----- ---------
+ crystal N/A N/A N/A
+
+ genpll_scr crystal 0 BCM_NS2_GENPLL_SCR
+ scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK
+ fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK
+ audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK
+ ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED
+ ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED
+ ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+ genpll_sw crystal 0 BCM_NS2_GENPLL_SW
+ rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK
+ 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK
+ nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK
+ chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK
+ port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK
+ sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK
+
+ lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR
+ pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+ ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK
+ ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED
+ ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED
+ ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED
+ ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+ lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS
+ wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK
+ rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK
+ ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+ ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+ ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+ ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
index 5ddb68418655..38dcf0370143 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
@@ -1,7 +1,7 @@
* Renesas CPG DIV6 Clock
The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
-Generator (CPG). They clock input is divided by a configurable factor from 1
+Generator (CPG). Their clock input is divided by a configurable factor from 1
to 64.
Required Properties:
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
new file mode 100644
index 000000000000..59297d34b208
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -0,0 +1,69 @@
+* Renesas Clock Pulse Generator / Module Standby and Software Reset
+
+On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
+and MSSR (Module Standby and Software Reset) blocks are intimately connected,
+and share the same register block.
+
+They provide the following functionalities:
+ - The CPG block generates various core clocks,
+ - The MSSR block provides two functions:
+ 1. Module Standby, providing a Clock Domain to control the clock supply
+ to individual SoC devices,
+ 2. Reset Control, to perform a software reset of individual SoC devices.
+
+Required Properties:
+ - compatible: Must be one of:
+ - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC
+
+ - reg: Base address and length of the memory resource used by the CPG/MSSR
+ block
+
+ - clocks: References to external parent clocks, one entry for each entry in
+ clock-names
+ - clock-names: List of external parent clock names. Valid names are:
+ - "extal" (r8a7795)
+ - "extalr" (r8a7795)
+
+ - #clock-cells: Must be 2
+ - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+ and a core clock reference, as defined in
+ <dt-bindings/clock/*-cpg-mssr.h>.
+ - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+ a module number, as defined in the datasheet.
+
+ - #power-domain-cells: Must be 0
+ - SoC devices that are part of the CPG/MSSR Clock Domain and can be
+ power-managed through Module Standby should refer to the CPG device
+ node in their "power-domains" property, as documented by the generic PM
+ Domain bindings in
+ Documentation/devicetree/bindings/power/power_domain.txt.
+
+
+Examples
+--------
+
+ - CPG device node:
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7795-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ };
+
+
+ - CPG/MSSR Clock Domain member device node:
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a7795", "renesas,scif";
+ reg = <0 0xe6e88000 0 64>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>;
+ clock-names = "sci_ick";
+ dmas = <&dmac1 0x13>, <&dmac1 0x12>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si514.txt b/Documentation/devicetree/bindings/clock/silabs,si514.txt
new file mode 100644
index 000000000000..ea1a9dbc63b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si514.txt
@@ -0,0 +1,24 @@
+Binding for Silicon Labs 514 programmable I2C clock generator.
+
+Reference
+This binding uses the common clock binding[1]. Details about the device can be
+found in the datasheet[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si514 datasheet
+ http://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
+
+Required properties:
+ - compatible: Shall be "silabs,si514"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si514".
+
+Example:
+ si514: clock-generator@55 {
+ reg = <0x55>;
+ #clock-cells = <0>;
+ compatible = "silabs,si514";
+ };
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index d8b168ebd5f1..844b3a0976bf 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -23,6 +23,7 @@ Required properties:
"st,stih407-plls-c32-a9", "st,clkgen-plls-c32"
"sst,plls-c32-cx_0", "st,clkgen-plls-c32"
"sst,plls-c32-cx_1", "st,clkgen-plls-c32"
+ "st,stih418-plls-c28-a9", "st,clkgen-plls-c32"
"st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32"
"st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"