summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-02 13:43:38 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-02 13:43:38 -0700
commit3883cbb6c1bda013a3ce2dbdab7dc97c52e4a232 (patch)
tree5b69f83b049d24ac81123ac954ca8c9128e48443 /Documentation
parentd2033f2c1d1de2239ded15e478ddb4028f192a15 (diff)
parent1eb92b24e243085d242cf5ffd64829bba70972e1 (diff)
downloadlinux-3883cbb6c1bda013a3ce2dbdab7dc97c52e4a232.tar.bz2
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/arm/sunxi/README4
-rw-r--r--Documentation/devicetree/bindings/arm/cci.txt172
-rw-r--r--Documentation/devicetree/bindings/arm/keystone/keystone.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/rtsm-dcscb.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/ste-u300.txt46
-rw-r--r--Documentation/devicetree/bindings/clock/imx5-clock.txt13
-rw-r--r--Documentation/devicetree/bindings/clock/imx6q-clock.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/imx6sl-clock.txt10
-rw-r--r--Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt80
-rw-r--r--Documentation/devicetree/bindings/clock/vf610-clock.txt26
-rw-r--r--Documentation/devicetree/bindings/clock/zynq-7000.txt123
-rw-r--r--Documentation/devicetree/bindings/dma/ste-coh901318.txt32
-rw-r--r--Documentation/devicetree/bindings/dma/ti-edma.txt34
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-clps711x.txt28
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt7
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt15
-rw-r--r--Documentation/devicetree/bindings/pci/designware-pcie.txt73
-rw-r--r--Documentation/devicetree/bindings/pci/mvebu-pci.txt221
-rw-r--r--Documentation/devicetree/bindings/pci/pci.txt9
-rw-r--r--Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt15
-rw-r--r--Documentation/devicetree/bindings/rtc/dw-apb.txt19
-rw-r--r--Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt18
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt19
24 files changed, 958 insertions, 37 deletions
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index d9a372d06e77..e3f93fb9224e 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -17,6 +17,10 @@ SunXi family
+ User Manual
http://dl.linux-sunxi.org/A10/A10%20User%20Manual%20-%20v1.20%20%282012-04-09%2c%20DECRYPTED%29.pdf
+ - Allwinner A10s (sun5i)
+ + Datasheet
+ http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf
+
- Allwinner A13 (sun5i)
+ Datasheet
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
new file mode 100644
index 000000000000..92d36e2aa877
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -0,0 +1,172 @@
+=======================================================
+ARM CCI cache coherent interconnect binding description
+=======================================================
+
+ARM multi-cluster systems maintain intra-cluster coherency through a
+cache coherent interconnect (CCI) that is capable of monitoring bus
+transactions and manage coherency, TLB invalidations and memory barriers.
+
+It allows snooping and distributed virtual memory message broadcast across
+clusters, through memory mapped interface, with a global control register
+space and multiple sets of interface control registers, one per slave
+interface.
+
+Bindings for the CCI node follow the ePAPR standard, available from:
+
+www.power.org/documentation/epapr-version-1-1/
+
+with the addition of the bindings described in this document which are
+specific to ARM.
+
+* CCI interconnect node
+
+ Description: Describes a CCI cache coherent Interconnect component
+
+ Node name must be "cci".
+ Node's parent must be the root node /, and the address space visible
+ through the CCI interconnect is the same as the one seen from the
+ root node (ie from CPUs perspective as per DT standard).
+ Every CCI node has to define the following properties:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be set to
+ "arm,cci-400"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies base physical
+ address of CCI control registers common to all
+ interfaces.
+
+ - ranges:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Follow rules in the ePAPR for
+ hierarchical bus addressing. CCI interfaces
+ addresses refer to the parent node addressing
+ scheme to declare their register bases.
+
+ CCI interconnect node can define the following child nodes:
+
+ - CCI control interface nodes
+
+ Node name must be "slave-if".
+ Parent node must be CCI interconnect node.
+
+ A CCI control interface node must contain the following
+ properties:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: must be set to
+ "arm,cci-400-ctrl-if"
+
+ - interface-type:
+ Usage: required
+ Value type: <string>
+ Definition: must be set to one of {"ace", "ace-lite"}
+ depending on the interface type the node
+ represents.
+
+ - reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the
+ corresponding interface programming
+ registers.
+
+* CCI interconnect bus masters
+
+ Description: masters in the device tree connected to a CCI port
+ (inclusive of CPUs and their cpu nodes).
+
+ A CCI interconnect bus master node must contain the following
+ properties:
+
+ - cci-control-port:
+ Usage: required
+ Value type: <phandle>
+ Definition: a phandle containing the CCI control interface node
+ the master is connected to.
+
+Example:
+
+ cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ cci-control-port = <&cci_control1>;
+ reg = <0x0>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ cci-control-port = <&cci_control1>;
+ reg = <0x1>;
+ };
+
+ CPU2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ cci-control-port = <&cci_control2>;
+ reg = <0x100>;
+ };
+
+ CPU3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ cci-control-port = <&cci_control2>;
+ reg = <0x101>;
+ };
+
+ };
+
+ dma0: dma@3000000 {
+ compatible = "arm,pl330", "arm,primecell";
+ cci-control-port = <&cci_control0>;
+ reg = <0x0 0x3000000 0x0 0x1000>;
+ interrupts = <10>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ cci@2c090000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x2c090000 0 0x1000>;
+ ranges = <0x0 0x0 0x2c090000 0x6000>;
+
+ cci_control0: slave-if@1000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace-lite";
+ reg = <0x1000 0x1000>;
+ };
+
+ cci_control1: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control2: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+ };
+
+This CCI node corresponds to a CCI component whose control registers sits
+at address 0x000000002c090000.
+CCI slave interface @0x000000002c091000 is connected to dma controller dma0.
+CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1};
+CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3};
diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
new file mode 100644
index 000000000000..63c0e6ae5cf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
@@ -0,0 +1,10 @@
+TI Keystone Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with Keystone2 based devices (TCI66xxK2H) SOC shall have the
+following properties.
+
+Required properties:
+ - compatible: All TI specific devices present in Keystone SOC should be in
+ the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
+ type UART should use the specified compatible for those devices.
diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
new file mode 100644
index 000000000000..3b8fbf3c00c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
@@ -0,0 +1,19 @@
+ARM Dual Cluster System Configuration Block
+-------------------------------------------
+
+The Dual Cluster System Configuration Block (DCSCB) provides basic
+functionality for controlling clocks, resets and configuration pins in
+the Dual Cluster System implemented by the Real-Time System Model (RTSM).
+
+Required properties:
+
+- compatible : should be "arm,rtsm,dcscb"
+
+- reg : physical base address and the size of the registers window
+
+Example:
+
+ dcscb@60000000 {
+ compatible = "arm,rtsm,dcscb";
+ reg = <0x60000000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt
new file mode 100644
index 000000000000..69b5ab0b5f4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ste-u300.txt
@@ -0,0 +1,46 @@
+ST-Ericsson U300 Device Tree Bindings
+
+For various board the "board" node may contain specific properties
+that pertain to this particular board, such as board-specific GPIOs
+or board power regulator supplies.
+
+Required root node property:
+
+compatible="stericsson,u300";
+
+Required node: syscon
+This contains the system controller.
+- compatible: must be "stericsson,u300-syscon".
+- reg: the base address and size of the system controller.
+
+Boards with the U300 SoC include:
+
+S365 "Small Board U365":
+
+Required node: s365
+This contains the board-specific information.
+- compatible: must be "stericsson,s365".
+- vana15-supply: the regulator supplying the 1.5V to drive the
+ board.
+- syscon: a pointer to the syscon node so we can acccess the
+ syscon registers to set the board as self-powered.
+
+Example:
+
+/ {
+ model = "ST-Ericsson U300";
+ compatible = "stericsson,u300";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ s365 {
+ compatible = "stericsson,s365";
+ vana15-supply = <&ab3100_ldo_d_reg>;
+ syscon = <&syscon>;
+ };
+
+ syscon: syscon@c0011000 {
+ compatible = "stericsson,u300-syscon";
+ reg = <0xc0011000 0x1000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index d71b4b2c077d..f46f5625d8ad 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -184,6 +184,19 @@ clocks and IDs.
cko2 170
srtc_gate 171
pata_gate 172
+ sata_gate 173
+ spdif_xtal_sel 174
+ spdif0_sel 175
+ spdif1_sel 176
+ spdif0_pred 177
+ spdif0_podf 178
+ spdif1_pred 179
+ spdif1_podf 180
+ spdif0_com_sel 181
+ spdif1_com_sel 182
+ spdif0_gate 183
+ spdif1_gate 184
+ spdif_ipg_gate 185
Examples (for mx53):
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 6deb6fd1c7cd..a0e104f0527e 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -208,6 +208,7 @@ clocks and IDs.
pll4_post_div 193
pll5_post_div 194
pll5_video_div 195
+ eim_slow 196
Examples:
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt
new file mode 100644
index 000000000000..15e40bdf147d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt
@@ -0,0 +1,10 @@
+* Clock bindings for Freescale i.MX6 SoloLite
+
+Required properties:
+- compatible: Should be "fsl,imx6sl-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sl-clock.h
+for the full list of i.MX6 SoloLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
new file mode 100644
index 000000000000..7cafcb98ead7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ste-u300-syscon-clock.txt
@@ -0,0 +1,80 @@
+Clock bindings for ST-Ericsson U300 System Controller Clocks
+
+Bindings for the gated system controller clocks:
+
+Required properties:
+- compatible: must be "stericsson,u300-syscon-clk"
+- #clock-cells: must be <0>
+- clock-type: specifies the type of clock:
+ 0 = slow clock
+ 1 = fast clock
+ 2 = rest/remaining clock
+- clock-id: specifies the clock in the type range
+
+Optional properties:
+- clocks: parent clock(s)
+
+The available clocks per type are as follows:
+
+Type: ID: Clock:
+-------------------
+0 0 Slow peripheral bridge clock
+0 1 UART0 clock
+0 4 GPIO clock
+0 6 RTC clock
+0 7 Application timer clock
+0 8 Access timer clock
+
+1 0 Fast peripheral bridge clock
+1 1 I2C bus 0 clock
+1 2 I2C bus 1 clock
+1 5 MMC interface peripheral (silicon) clock
+1 6 SPI clock
+
+2 3 CPU clock
+2 4 DMA controller clock
+2 5 External Memory Interface (EMIF) clock
+2 6 NAND flask interface clock
+2 8 XGAM graphics engine clock
+2 9 Shared External Memory Interface (SEMI) clock
+2 10 AHB Subsystem Bridge clock
+2 12 Interrupt controller clock
+
+Example:
+
+gpio_clk: gpio_clk@13M {
+ #clock-cells = <0>;
+ compatible = "stericsson,u300-syscon-clk";
+ clock-type = <0>; /* Slow */
+ clock-id = <4>;
+ clocks = <&slow_clk>;
+};
+
+gpio: gpio@c0016000 {
+ compatible = "stericsson,gpio-coh901";
+ (...)
+ clocks = <&gpio_clk>;
+};
+
+
+Bindings for the MMC/SD card clock:
+
+Required properties:
+- compatible: must be "stericsson,u300-syscon-mclk"
+- #clock-cells: must be <0>
+
+Optional properties:
+- clocks: parent clock(s)
+
+mmc_mclk: mmc_mclk {
+ #clock-cells = <0>;
+ compatible = "stericsson,u300-syscon-mclk";
+ clocks = <&mmc_pclk>;
+};
+
+mmcsd: mmcsd@c0001000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ clocks = <&mmc_pclk>, <&mmc_mclk>;
+ clock-names = "apb_pclk", "mclk";
+ (...)
+};
diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt
new file mode 100644
index 000000000000..c80863d344ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale Vybrid VF610 SOC
+
+Required properties:
+- compatible: Should be "fsl,vf610-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+for the full list of VF610 clock IDs.
+
+Examples:
+
+clks: ccm@4006b000 {
+ compatible = "fsl,vf610-ccm";
+ reg = <0x4006b000 0x1000>;
+ #clock-cells = <1>;
+};
+
+uart1: serial@40028000 {
+ compatible = "fsl,vf610-uart";
+ reg = <0x40028000 0x1000>;
+ interrupts = <0 62 0x04>;
+ clocks = <&clks VF610_CLK_UART1>;
+ clock-names = "ipg";
+};
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
index 23ae1db1bc13..d99af878f5d7 100644
--- a/Documentation/devicetree/bindings/clock/zynq-7000.txt
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -6,50 +6,99 @@ The purpose of this document is to document their usage.
See clock_bindings.txt for more information on the generic clock bindings.
See Chapter 25 of Zynq TRM for more information about Zynq clocks.
-== PLLs ==
-
-Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
+== Clock Controller ==
+The clock controller is a logical abstraction of Zynq's clock tree. It reads
+required input clock frequencies from the devicetree and acts as clock provider
+for all clock consumers of PS clocks.
Required properties:
-- #clock-cells : shall be 0 (only one clock is output from this node)
-- compatible : "xlnx,zynq-pll"
-- reg : pair of u32 values, which are the address offsets within the SLCR
- of the relevant PLL_CTRL register and PLL_CFG register respectively
-- clocks : phandle for parent clock. should be the phandle for ps_clk
+ - #clock-cells : Must be 1
+ - compatible : "xlnx,ps7-clkc"
+ - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ
+ (usually 33 MHz oscillators are used for Zynq platforms)
+ - clock-output-names : List of strings used to name the clock outputs. Shall be
+ a list of the outputs given below.
Optional properties:
-- clock-output-names : name of the output clock
-
-Example:
- armpll: armpll {
- #clock-cells = <0>;
- compatible = "xlnx,zynq-pll";
- clocks = <&ps_clk>;
- reg = <0x100 0x110>;
- clock-output-names = "armpll";
- };
-
-== Peripheral clocks ==
+ - clocks : as described in the clock bindings
+ - clock-names : as described in the clock bindings
-Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
+Clock inputs:
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source.
+ - swdt_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - mio_clk_XX # with XX = 00..53
+...
-Required properties:
-- #clock-cells : shall be 1
-- compatible : "xlnx,zynq-periph-clock"
-- reg : a single u32 value, describing the offset within the SLCR where
- the CLK_CTRL register is found for this peripheral
-- clocks : phandle for parent clocks. should hold phandles for
- the IO_PLL, ARM_PLL, and DDR_PLL in order
-- clock-output-names : names of the output clock(s). For peripherals that have
- two output clocks (for example, the UART), two clocks
- should be listed.
+Clock outputs:
+ 0: armpll
+ 1: ddrpll
+ 2: iopll
+ 3: cpu_6or4x
+ 4: cpu_3or2x
+ 5: cpu_2x
+ 6: cpu_1x
+ 7: ddr2x
+ 8: ddr3x
+ 9: dci
+ 10: lqspi
+ 11: smc
+ 12: pcap
+ 13: gem0
+ 14: gem1
+ 15: fclk0
+ 16: fclk1
+ 17: fclk2
+ 18: fclk3
+ 19: can0
+ 20: can1
+ 21: sdio0
+ 22: sdio1
+ 23: uart0
+ 24: uart1
+ 25: spi0
+ 26: spi1
+ 27: dma
+ 28: usb0_aper
+ 29: usb1_aper
+ 30: gem0_aper
+ 31: gem1_aper
+ 32: sdio0_aper
+ 33: sdio1_aper
+ 34: spi0_aper
+ 35: spi1_aper
+ 36: can0_aper
+ 37: can1_aper
+ 38: i2c0_aper
+ 39: i2c1_aper
+ 40: uart0_aper
+ 41: uart1_aper
+ 42: gpio_aper
+ 43: lqspi_aper
+ 44: smc_aper
+ 45: swdt
+ 46: dbg_trc
+ 47: dbg_apb
Example:
- uart_clk: uart_clk {
+ clkc: clkc {
#clock-cells = <1>;
- compatible = "xlnx,zynq-periph-clock";
- clocks = <&iopll &armpll &ddrpll>;
- reg = <0x154>;
- clock-output-names = "uart0_ref_clk",
- "uart1_ref_clk";
+ compatible = "xlnx,ps7-clkc";
+ ps-clk-frequency = <33333333>;
+ clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+ "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+ "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+ "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+ "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+ "dma", "usb0_aper", "usb1_aper", "gem0_aper",
+ "gem1_aper", "sdio0_aper", "sdio1_aper",
+ "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+ "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+ "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+ "dbg_trc", "dbg_apb";
+ # optional props
+ clocks = <&clkc 16>, <&clk_foo>;
+ clock-names = "gem1_emio_clk", "can_mio_clk_23";
};
diff --git a/Documentation/devicetree/bindings/dma/ste-coh901318.txt b/Documentation/devicetree/bindings/dma/ste-coh901318.txt
new file mode 100644
index 000000000000..091ad057e9cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ste-coh901318.txt
@@ -0,0 +1,32 @@
+ST-Ericsson COH 901 318 DMA Controller
+
+This is a DMA controller which has begun as a fork of the
+ARM PL08x PrimeCell VHDL code.
+
+Required properties:
+- compatible: should be "stericsson,coh901318"
+- reg: register locations and length
+- interrupts: the single DMA IRQ
+- #dma-cells: must be set to <1>, as the channels on the
+ COH 901 318 are simple and identified by a single number
+- dma-channels: the number of DMA channels handled
+
+Example:
+
+dmac: dma-controller@c00020000 {
+ compatible = "stericsson,coh901318";
+ reg = <0xc0020000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <2>;
+ #dma-cells = <1>;
+ dma-channels = <40>;
+};
+
+Consumers example:
+
+uart0: serial@c0013000 {
+ compatible = "...";
+ (...)
+ dmas = <&dmac 17 &dmac 18>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
new file mode 100644
index 000000000000..9fbbdb783a72
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -0,0 +1,34 @@
+TI EDMA
+
+Required properties:
+- compatible : "ti,edma3"
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- #dma-cells: Should be set to <1>
+ Clients should use a single channel number per DMA request.
+- dma-channels: Specify total DMA channels per CC
+- reg: Memory map for accessing module
+- interrupt-parent: Interrupt controller the interrupt is routed through
+- interrupts: Exactly 3 interrupts need to be specified in the order:
+ 1. Transfer completion interrupt.
+ 2. Memory protection interrupt.
+ 3. Error interrupt.
+Optional properties:
+- ti,hwmods: Name of the hwmods associated to the EDMA
+- ti,edma-xbar-event-map: Crossbar event to channel map
+
+Example:
+
+edma: edma@49000000 {
+ reg = <0x49000000 0x10000>;
+ interrupt-parent = <&intc>;
+ interrupts = <12 13 14>;
+ compatible = "ti,edma3";
+ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+ #dma-cells = <1>;
+ dma-channels = <64>;
+ ti,edma-regions = <4>;
+ ti,edma-slots = <256>;
+ ti,edma-xbar-event-map = <1 12
+ 2 13>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
new file mode 100644
index 000000000000..e0d0446a6b78
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
@@ -0,0 +1,28 @@
+Cirrus Logic CLPS711X GPIO controller
+
+Required properties:
+- compatible: Should be "cirrus,clps711x-gpio"
+- reg: Physical base GPIO controller registers location and length.
+ There should be two registers, first is DATA register, the second
+ is DIRECTION.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+ the second cell is used to specify the gpio polarity:
+ 0 = active high
+ 1 = active low
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+ gpio0 = &porta;
+};
+
+porta: gpio@80000000 {
+ compatible = "cirrus,clps711x-gpio";
+ reg = <0x80000000 0x1>, <0x80000040 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
new file mode 100644
index 000000000000..fd665b44d767
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stericsson-coh901.txt
@@ -0,0 +1,7 @@
+ST-Ericsson COH 901 571/3 GPIO controller
+
+Required properties:
+- compatible: Compatible property value should be "stericsson,gpio-coh901"
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+- interrupts: the 0...n interrupts assigned to the different GPIO ports/banks.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
new file mode 100644
index 000000000000..bd81a482634f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
@@ -0,0 +1,15 @@
+ST Microelectronics DDC I2C
+
+Required properties :
+- compatible : Must be "st,ddci2c"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Examples :
+
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
new file mode 100644
index 000000000000..e2371f5cdebe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -0,0 +1,73 @@
+* Synopsis Designware PCIe interface
+
+Required properties:
+- compatible: should contain "snps,dw-pcie" to identify the
+ core, plus an identifier for the specific instance, such
+ as "samsung,exynos5440-pcie".
+- reg: base addresses and lengths of the pcie controller,
+ the phy controller, additional register for the phy controller.
+- interrupts: interrupt values for level interrupt,
+ pulse interrupt, special interrupt.
+- clocks: from common clock binding: handle to pci clock.
+- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- ranges: ranges for the PCI memory and I/O regions
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+ to define the mapping of the PCIe interface to interrupt
+ numbers.
+- reset-gpio: gpio pin number of power good signal
+
+Example:
+
+SoC specific DT Entry:
+
+ pcie@290000 {
+ compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+ reg = <0x290000 0x1000
+ 0x270000 0x1000
+ 0x271000 0x40>;
+ interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+ clocks = <&clock 28>, <&clock 27>;
+ clock-names = "pcie", "pcie_bus";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /* configuration space */
+ 0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0x0 0 &gic 53>;
+ };
+
+ pcie@2a0000 {
+ compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+ reg = <0x2a0000 0x1000
+ 0x272000 0x1000
+ 0x271040 0x40>;
+ interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+ clocks = <&clock 29>, <&clock 27>;
+ clock-names = "pcie", "pcie_bus";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /* configuration space */
+ 0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0x0 0 &gic 56>;
+ };
+
+Board specific DT Entry:
+
+ pcie@290000 {
+ reset-gpio = <&pin_ctrl 5 0>;
+ };
+
+ pcie@2a0000 {
+ reset-gpio = <&pin_ctrl 22 0>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
new file mode 100644
index 000000000000..f8d405897a94
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -0,0 +1,221 @@
+* Marvell EBU PCIe interfaces
+
+Mandatory properties:
+- compatible: one of the following values:
+ marvell,armada-370-pcie
+ marvell,armada-xp-pcie
+ marvell,kirkwood-pcie
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- bus-range: PCI bus numbers covered
+- device_type, set to "pci"
+- ranges: ranges for the PCI memory and I/O regions, as well as the
+ MMIO registers to control the PCIe interfaces.
+
+In addition, the Device Tree node must have sub-nodes describing each
+PCIe interface, having the following mandatory properties:
+- reg: used only for interrupt mapping, so only the first four bytes
+ are used to refer to the correct bus number and device number.
+- assigned-addresses: reference to the MMIO registers used to control
+ this PCIe interface.
+- clocks: the clock associated to this PCIe interface
+- marvell,pcie-port: the physical PCIe port number
+- status: either "disabled" or "okay"
+- device_type, set to "pci"
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- ranges, empty property.
+- interrupt-map-mask and interrupt-map, standard PCI properties to
+ define the mapping of the PCIe interface to interrupt numbers.
+
+and the following optional properties:
+- marvell,pcie-lane: the physical PCIe lane number, for ports having
+ multiple lanes. If this property is not found, we assume that the
+ value is 0.
+
+Example:
+
+pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */
+ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
+ 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+ reg = <0x1800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+
+ pcie@4,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+ reg = <0x2000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ pcie@5,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 9>;
+ status = "disabled";
+ };
+
+ pcie@6,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+ reg = <0x3000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 63>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 10>;
+ status = "disabled";
+ };
+
+ pcie@7,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+ reg = <0x3800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 64>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ pcie@8,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+ reg = <0x4000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 65>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 12>;
+ status = "disabled";
+ };
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+
+ pcie@10,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+ reg = <0x5000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 103>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 27>;
+ status = "disabled";
+ };
+};
diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
new file mode 100644
index 000000000000..41aeed38926d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -0,0 +1,9 @@
+PCI bus bridges have standardized Device Tree bindings:
+
+PCI Bus Binding to: IEEE Std 1275-1994
+http://www.openfirmware.org/ofwg/bindings/pci/pci2_1.pdf
+
+And for the interrupt mapping part:
+
+Open Firmware Recommended Practice: Interrupt Mapping
+http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
new file mode 100644
index 000000000000..30b364e504ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
@@ -0,0 +1,15 @@
+V3 Semiconductor V360 EPC PCI bridge
+
+This bridge is found in the ARM Integrator/AP (Application Platform)
+
+Integrator-specific notes:
+
+- syscon: should contain a link to the syscon device node (since
+ on the Integrator, some registers in the syscon are required to
+ operate the V3).
+
+V360 EPC specific notes:
+
+- reg: should contain the base address of the V3 adapter.
+- interrupts: should contain a reference to the V3 error interrupt
+ as routed on the system.
diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt
index 93e2b0f048e6..eb2327b2bdb3 100644
--- a/Documentation/devicetree/bindings/rtc/dw-apb.txt
+++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt
@@ -5,9 +5,20 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: IRQ line for the timer.
+- either clocks+clock-names or clock-frequency properties
+
+Optional properties:
+- clocks : list of clock specifiers, corresponding to entries in
+ the clock-names property;
+- clock-names : should contain "timer" and "pclk" entries, matching entries
+ in the clocks property.
- clock-frequency: The frequency in HZ of the timer.
- clock-freq: For backwards compatibility with picoxcell
+If using the clock specifiers, the pclk clock is optional, as not all
+systems may use one.
+
+
Example:
timer1: timer@ffc09000 {
@@ -23,3 +34,11 @@ Example:
clock-frequency = <200000000>;
reg = <0xffd00000 0x1000>;
};
+
+ timer3: timer@ffe00000 {
+ compatible = "snps,dw-apb-timer-osc";
+ interrupts = <0 170 4>;
+ reg = <0xffe00000 0x1000>;
+ clocks = <&timer_clk>, <&timer_pclk>;
+ clock-names = "timer", "pclk";
+ };
diff --git a/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt
new file mode 100644
index 000000000000..9499bc8ee9e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/stericsson-u300-apptimer.txt
@@ -0,0 +1,18 @@
+ST-Ericsson U300 apptimer
+
+Required properties:
+
+- compatible : should be "stericsson,u300-apptimer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupts; one for each subtimer. These
+ are, in order: OS (operating system), DD (device driver) both
+ adopted for EPOC/Symbian with two specific IRQs for these tasks,
+ then GP1 and GP2, which are general-purpose timers.
+
+Example:
+
+timer {
+ compatible = "stericsson,u300-apptimer";
+ reg = <0xc0014000 0x1000>;
+ interrupts = <24 25 26 27>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6931c4348d24..d247d1003987 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -59,6 +59,7 @@ ste ST-Ericsson
stericsson ST-Ericsson
ti Texas Instruments
toshiba Toshiba Corporation
+v3 V3 Semiconductor
via VIA Technologies, Inc.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
diff --git a/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
new file mode 100644
index 000000000000..8ffb88e39e76
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/stericsson-coh901327.txt
@@ -0,0 +1,19 @@
+ST-Ericsson COH 901 327 Watchdog timer
+
+Required properties:
+- compatible: must be "stericsson,coh901327".
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: the interrupt used for the watchdog timeout warning.
+
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
+Example:
+
+watchdog: watchdog@c0012000 {
+ compatible = "stericsson,coh901327";
+ reg = <0xc0012000 0x1000>;
+ interrupts = <3>;
+ timeout-sec = <60>;
+};