summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-02-26 09:41:53 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-02-26 09:41:53 -0800
commit52caa59ed335616c5254adff7911465a57ed9f14 (patch)
treede0a1e91850c9e439e82f83f228d89fee3b90b09 /Documentation
parent4c8c225abf972ce422c241579ce1d4d27eaeb166 (diff)
parent55827f4aa6442ddd1d6a4e1e32f2f457eb113c22 (diff)
downloadlinux-52caa59ed335616c5254adff7911465a57ed9f14.tar.bz2
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "Highlights: - new drivers for Intel ismt & Broadcom bcm2835 - a number of drivers got support for more variants and mostly got cleaned up on the way (sis630, i801, at91, tegra, designware) - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure - removed the i2c_smbus_process_call from the core since there are no users - mxs can now switch between PIO and DMA depending on the message size and the bus speed can now be arbitrary In addition, there is the usual bunch of fixes, cleanups, devm_* conversions, etc" Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits) i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls i2c: pxa: remove incorrect __exit annotations i2c: ocores: Fix pointer to integer cast warning i2c: tegra: remove warning dump if timeout happen in transfer i2c: fix i2c-ismt.c printk format warning i2c: i801: Add Device IDs for Intel Wellsburg PCH i2c: add bcm2835 driver i2c: ismt: Add Seth and Myself as maintainers i2c: sis630: checkpatch cleanup i2c: sis630: display unsigned hex i2c: sis630: use hex to constants for SMBus commands i2c: sis630: fix behavior after collision i2c: sis630: clear sticky bits i2c: sis630: Add SIS964 support i2c: isch: Add module parameter for backbone clock rate if divider is unset i2c: at91: fix unsed variable warning when building with !CONFIG_OF i2c: Adding support for Intel iSMT SMBus 2.0 host controller i2c: sh_mobile: don't send a stop condition by default inside transfers i2c: sh_mobile: eliminate an open-coded "goto" loop i2c: sh_mobile: fix timeout error handling ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt20
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt2
-rw-r--r--Documentation/i2c/busses/i2c-i8012
-rw-r--r--Documentation/i2c/busses/i2c-ismt36
-rw-r--r--Documentation/i2c/busses/i2c-sis6309
-rw-r--r--Documentation/i2c/smbus-protocol4
-rw-r--r--Documentation/i2c/writing-clients4
7 files changed, 73 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
new file mode 100644
index 000000000000..e9de3756752b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
@@ -0,0 +1,20 @@
+Broadcom BCM2835 I2C controller
+
+Required properties:
+- compatible : Should be "brcm,bcm2835-i2c".
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks : The clock feeding the I2C controller.
+
+Recommended properties:
+- clock-frequency : desired I2C bus clock frequency in Hz.
+
+Example:
+
+i2c@20205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clk_i2c>;
+ clock-frequency = <100000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index e9611ace8792..f98d4c5b5cca 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -8,6 +8,8 @@ Required properties:
(b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
(c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
inside HDMIPHY block found on several samsung SoCs
+ (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used
+ on EXYNOS5440 which does not need GPIO configuration.
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 157416e78cc4..d55b8ab2d10f 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -22,6 +22,8 @@ Supported adapters:
* Intel Panther Point (PCH)
* Intel Lynx Point (PCH)
* Intel Lynx Point-LP (PCH)
+ * Intel Avoton (SOC)
+ * Intel Wellsburg (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/i2c/busses/i2c-ismt b/Documentation/i2c/busses/i2c-ismt
new file mode 100644
index 000000000000..737355822c0b
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-ismt
@@ -0,0 +1,36 @@
+Kernel driver i2c-ismt
+
+Supported adapters:
+ * Intel S12xx series SOCs
+
+Authors:
+ Bill Brown <bill.e.brown@intel.com>
+
+
+Module Parameters
+-----------------
+
+* bus_speed (unsigned int)
+Allows changing of the bus speed. Normally, the bus speed is set by the BIOS
+and never needs to be changed. However, some SMBus analyzers are too slow for
+monitoring the bus during debug, thus the need for this module parameter.
+Specify the bus speed in kHz.
+Available bus frequency settings:
+ 0 no change
+ 80 kHz
+ 100 kHz
+ 400 kHz
+ 1000 kHz
+
+
+Description
+-----------
+
+The S12xx series of SOCs have a pair of integrated SMBus 2.0 controllers
+targeted primarily at the microserver and storage markets.
+
+The S12xx series contain a pair of PCI functions. An output of lspci will show
+something similar to the following:
+
+ 00:13.0 System peripheral: Intel Corporation Centerton SMBus 2.0 Controller 0
+ 00:13.1 System peripheral: Intel Corporation Centerton SMBus 2.0 Controller 1
diff --git a/Documentation/i2c/busses/i2c-sis630 b/Documentation/i2c/busses/i2c-sis630
index 0b9697366930..ee7943631074 100644
--- a/Documentation/i2c/busses/i2c-sis630
+++ b/Documentation/i2c/busses/i2c-sis630
@@ -4,9 +4,11 @@ Supported adapters:
* Silicon Integrated Systems Corp (SiS)
630 chipset (Datasheet: available at http://www.sfr-fresh.com/linux)
730 chipset
+ 964 chipset
* Possible other SiS chipsets ?
Author: Alexander Malysh <amalysh@web.de>
+ Amaury Decrême <amaury.decreme@gmail.com> - SiS964 support
Module Parameters
-----------------
@@ -18,6 +20,7 @@ Module Parameters
* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
what your BIOS use). DANGEROUS! This should be a bit
faster, but freeze some systems (i.e. my Laptop).
+ SIS630/730 chip only.
Description
@@ -36,6 +39,12 @@ or like this:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev 02)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
+or like this:
+
+00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 02)
+00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO]
+ LPC Controller (rev 36)
+
in your 'lspci' output , then this driver is for your chipset.
Thank You
diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol
index d1f22618e14b..6012b12b3510 100644
--- a/Documentation/i2c/smbus-protocol
+++ b/Documentation/i2c/smbus-protocol
@@ -137,8 +137,8 @@ available for writes where the two data bytes are the other way
around (not SMBus compliant, but very popular.)
-SMBus Process Call: i2c_smbus_process_call()
-=============================================
+SMBus Process Call:
+===================
This command selects a device register (through the Comm byte), sends
16 bits of data to it, and reads 16 bits of data in return.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 3a94b0e6f601..6b344b516bff 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -365,8 +365,6 @@ in terms of it. Never use this function directly!
s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
s32 i2c_smbus_write_word_data(struct i2c_client *client,
u8 command, u16 value);
- s32 i2c_smbus_process_call(struct i2c_client *client,
- u8 command, u16 value);
s32 i2c_smbus_read_block_data(struct i2c_client *client,
u8 command, u8 *values);
s32 i2c_smbus_write_block_data(struct i2c_client *client,
@@ -381,6 +379,8 @@ These ones were removed from i2c-core because they had no users, but could
be added back later if needed:
s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value);
+ s32 i2c_smbus_process_call(struct i2c_client *client,
+ u8 command, u16 value);
s32 i2c_smbus_block_process_call(struct i2c_client *client,
u8 command, u8 length, u8 *values);