summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorRichard Leitner <richard.leitner@skidata.com>2017-03-06 09:24:20 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2017-03-09 10:34:15 +0100
commitcfa47afe77b393e2c24a57e7e9611857a0b064f1 (patch)
tree541422b8a656e57ec00affacd6cd7e802de56f23 /Documentation
parentd595259fbb7a7afed241b1afb2c4fe4b47de47fa (diff)
downloadlinux-cfa47afe77b393e2c24a57e7e9611857a0b064f1.tar.bz2
usb: usb251xb: remove max_{power,current}_{sp,bp} properties
Remove the max_{power,current}_{sp,bp} properties of the usb251xb driver from devicetree. This is done to simplify the dt bindings as requested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. If those properties are ever needed by somebody they can be enabled again easily. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/usb/usb251xb.txt20
1 files changed, 0 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 0c065f77658f..a5efd10ace9e 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -40,26 +40,6 @@ Optional properties :
device connected.
- sp-disabled-ports : Specifies the ports which will be self-power disabled
- bp-disabled-ports : Specifies the ports which will be bus-power disabled
- - max-sp-power : Specifies the maximum current the hub consumes from an
- upstream port when operating as self-powered hub including the power
- consumption of a permanently attached peripheral if the hub is
- configured as a compound device. The value is given in mA in a 0 - 500
- range (default is 2).
- - max-bp-power : Specifies the maximum current the hub consumes from an
- upstream port when operating as bus-powered hub including the power
- consumption of a permanently attached peripheral if the hub is
- configured as a compound device. The value is given in mA in a 0 - 500
- range (default is 100).
- - max-sp-current : Specifies the maximum current the hub consumes from an
- upstream port when operating as self-powered hub EXCLUDING the power
- consumption of a permanently attached peripheral if the hub is
- configured as a compound device. The value is given in mA in a 0 - 500
- range (default is 2).
- - max-bp-current : Specifies the maximum current the hub consumes from an
- upstream port when operating as bus-powered hub EXCLUDING the power
- consumption of a permanently attached peripheral if the hub is
- configured as a compound device. The value is given in mA in a 0 - 500
- range (default is 100).
- power-on-time : Specifies the time it takes from the time the host initiates
the power-on sequence to a port until the port has adequate power. The
value is given in ms in a 0 - 510 range (default is 100ms).