Merge tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux into nextnext

Pull clock framework updates from Mike Turquette:
 "The clock framework changes for 3.16 are pretty typical: mostly clock
  driver additions and fixes.  There are additions to the clock core
  code for some of the basic types (e.g. the common divider type has
  some fixes and featured added to it).

  One minor annoyance is a last-minute dependency that wasn't handled
  quite right.  Commit ba0fae3b06a6 ("clk: berlin: add core clock driver
  for BG2/BG2CD") in this pull request depends on
  include/dt-bindings/clock/berlin2.h, which is already in your tree via
  the arm-soc pull request.  Building for the berlin platform will break
  when the clk tree is built on it's own, but merged into your master
  branch everything should be fine"

* tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits)
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  clk: export __clk_round_rate for providers
  clk: versatile: free icst on error return
  clk: qcom: Return error pointers for unimplemented clocks
  clk: qcom: Support msm8974pro global clock control hardware
  clk: qcom: Properly support display clocks on msm8974
  clk: qcom: Support display RCG clocks
  clk: qcom: Return highest rate when round_rate() exceeds plan
  clk: qcom: Fix mmcc-8974's PLL configurations
  clk: qcom: Fix clk_rcg2_is_enabled() check
  clk: berlin: add core clock driver for BG2Q
  clk: berlin: add core clock driver for BG2/BG2CD
  clk: berlin: add driver for BG2x complex divider cells
  clk: berlin: add driver for BG2x simple PLLs
  clk: berlin: add driver for BG2x audio/video PLL
  clk: st: Terminate of match table
  clk/exynos4: Fix compilation warning
  ARM: shmobile: r8a7779: Add clock index macros for DT sources
  clk: divider: Fix overflow in clk_divider_bestdiv
  clk: u300: Terminate of match table
  ...

12 files changed, 279 insertions, 46 deletions

diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index c9c399af7c08..1fee72f4d331 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -68,21 +68,27 @@ the operations defined in clk.h:
 		int		(*is_enabled)(struct clk_hw *hw);
 		unsigned long	(*recalc_rate)(struct clk_hw *hw,
 						unsigned long parent_rate);
-		long		(*round_rate)(struct clk_hw *hw, unsigned long,
-						unsigned long *);
+		long		(*round_rate)(struct clk_hw *hw,
+						unsigned long rate,
+						unsigned long *parent_rate);
 		long		(*determine_rate)(struct clk_hw *hw,
 						unsigned long rate,
 						unsigned long *best_parent_rate,
 						struct clk **best_parent_clk);
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
-		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate);
 		int		(*set_rate_and_parent)(struct clk_hw *hw,
 					    unsigned long rate,
-					    unsigned long parent_rate, u8 index);
+					    unsigned long parent_rate,
+					    u8 index);
 		unsigned long	(*recalc_accuracy)(struct clk_hw *hw,
-						   unsigned long parent_accuracy);
+						unsigned long parent_accuracy);
 		void		(*init)(struct clk_hw *hw);
+		int		(*debug_init)(struct clk_hw *hw,
+					      struct dentry *dentry);
 	};
 
 	Part 3 - hardware clk implementations
diff --git a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
index 56d1f4961075..5286e260fcae 100644
--- a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
+++ b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
@@ -10,12 +10,12 @@ This binding uses the common clock binding:
 
 Required properties:
 - compatible
-	Shall have one of the following values:
-	- "brcm,bcm11351-root-ccu"
-	- "brcm,bcm11351-aon-ccu"
-	- "brcm,bcm11351-hub-ccu"
-	- "brcm,bcm11351-master-ccu"
-	- "brcm,bcm11351-slave-ccu"
+	Shall have a value of the form "brcm,<model>-<which>-ccu",
+	where <model> is a Broadcom SoC model number and <which> is
+	the name of a defined CCU.  For example:
+	    "brcm,bcm11351-root-ccu"
+	The compatible strings used for each supported SoC family
+	are defined below.
 - reg
 	Shall define the base and range of the address space
 	containing clock control registers
@@ -26,12 +26,48 @@ Required properties:
 	Shall be an ordered list of strings defining the names of
 	the clocks provided by the CCU.
 
+Device tree example:
+
+	slave_ccu: slave_ccu {
+		compatible = "brcm,bcm11351-slave-ccu";
+		reg = <0x3e011000 0x0f00>;
+		#clock-cells = <1>;
+		clock-output-names = "uartb",
+				     "uartb2",
+				     "uartb3",
+				     "uartb4";
+	};
+
+	ref_crystal_clk: ref_crystal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+BCM281XX family
+---------------
+CCU compatible string values for SoCs in the BCM281XX family are:
+    "brcm,bcm11351-root-ccu"
+    "brcm,bcm11351-aon-ccu"
+    "brcm,bcm11351-hub-ccu"
+    "brcm,bcm11351-master-ccu"
+    "brcm,bcm11351-slave-ccu"
 
-BCM281XX family SoCs use Kona CCUs.  The following table defines
-the set of CCUs and clock specifiers for BCM281XX clocks.  When
-a clock consumer references a clocks, its symbolic specifier
-(rather than its numeric index value) should be used.  These
-specifiers are defined in "include/dt-bindings/clock/bcm281xx.h".
+The following table defines the set of CCUs and clock specifiers for
+BCM281XX family clocks.  When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used.  These specifiers are defined in:
+    "include/dt-bindings/clock/bcm281xx.h"
 
     CCU     Clock           Type    Index   Specifier
     ---     -----           ----    -----   ---------
@@ -64,30 +100,40 @@ specifiers are defined in "include/dt-bindings/clock/bcm281xx.h".
     slave   pwm             peri      9     BCM281XX_SLAVE_CCU_PWM
 
 
-Device tree example:
+BCM21664 family
+---------------
+CCU compatible string values for SoCs in the BCM21664 family are:
+    "brcm,bcm21664-root-ccu"
+    "brcm,bcm21664-aon-ccu"
+    "brcm,bcm21664-master-ccu"
+    "brcm,bcm21664-slave-ccu"
 
-	slave_ccu: slave_ccu {
-		compatible = "brcm,bcm11351-slave-ccu";
-		reg = <0x3e011000 0x0f00>;
-		#clock-cells = <1>;
-		clock-output-names = "uartb",
-				     "uartb2",
-				     "uartb3",
-				     "uartb4";
-	};
+The following table defines the set of CCUs and clock specifiers for
+BCM21664 family clocks.  When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used.  These specifiers are defined in:
+    "include/dt-bindings/clock/bcm21664.h"
 
-	ref_crystal_clk: ref_crystal {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
+    CCU     Clock           Type    Index   Specifier
+    ---     -----           ----    -----   ---------
+    root    frac_1m         peri      0     BCM21664_ROOT_CCU_FRAC_1M
 
-	uart@3e002000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
+    aon     hub_timer       peri      0     BCM21664_AON_CCU_HUB_TIMER
+
+    master  sdio1           peri      0     BCM21664_MASTER_CCU_SDIO1
+    master  sdio2           peri      1     BCM21664_MASTER_CCU_SDIO2
+    master  sdio3           peri      2     BCM21664_MASTER_CCU_SDIO3
+    master  sdio4           peri      3     BCM21664_MASTER_CCU_SDIO4
+    master  sdio1_sleep     peri      4     BCM21664_MASTER_CCU_SDIO1_SLEEP
+    master  sdio2_sleep     peri      5     BCM21664_MASTER_CCU_SDIO2_SLEEP
+    master  sdio3_sleep     peri      6     BCM21664_MASTER_CCU_SDIO3_SLEEP
+    master  sdio4_sleep     peri      7     BCM21664_MASTER_CCU_SDIO4_SLEEP
+
+    slave   uartb           peri      0     BCM21664_SLAVE_CCU_UARTB
+    slave   uartb2          peri      1     BCM21664_SLAVE_CCU_UARTB2
+    slave   uartb3          peri      2     BCM21664_SLAVE_CCU_UARTB3
+    slave   uartb4          peri      3     BCM21664_SLAVE_CCU_UARTB4
+    slave   bsc1            peri      4     BCM21664_SLAVE_CCU_BSC1
+    slave   bsc2            peri      5     BCM21664_SLAVE_CCU_BSC2
+    slave   bsc3            peri      6     BCM21664_SLAVE_CCU_BSC3
+    slave   bsc4            peri      7     BCM21664_SLAVE_CCU_BSC4
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 700e7aac3717..f15787817d6b 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -44,10 +44,9 @@ For example:
   clocks by index. The names should reflect the clock output signal
   names for the device.
 
-clock-indices:	   If the identifyng number for the clocks in the node
-		   is not linear from zero, then the this mapping allows
-		   the mapping of identifiers into the clock-output-names
-		   array.
+clock-indices:	   If the identifying number for the clocks in the node
+		   is not linear from zero, then this allows the mapping of
+		   identifiers into the clock-output-names array.
 
 For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
 
@@ -58,7 +57,7 @@ For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
 		clock-output-names = "clka", "clkb";
 	}
 
-	This ensures we do not have any empty nodes in clock-output-names
+	This ensures we do not have any empty strings in clock-output-names
 
 
 ==Clock consumers==
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt
index 48ea0ad8ad46..0641a663ad69 100644
--- a/Documentation/devicetree/bindings/clock/fixed-clock.txt
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt
@@ -12,7 +12,6 @@ Required properties:
 Optional properties:
 - clock-accuracy : accuracy of clock in ppb (parts per billion).
 		   Should be a single cell.
-- gpios : From common gpio binding; gpio connection to clock enable pin.
 - clock-output-names : From common clock binding.
 
 Example:
diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
new file mode 100644
index 000000000000..7894a64887cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
@@ -0,0 +1,31 @@
+* Hisilicon Hix5hd2 Clock Controller
+
+The hix5hd2 clock controller generates and supplies clock to various
+controllers within the hix5hd2 SoC.
+
+Required Properties:
+
+- compatible: should be "hisilicon,hix5hd2-clock"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>.
+
+Examples:
+	clock: clock@f8a22000 {
+		compatible = "hisilicon,hix5hd2-clock";
+		reg = <0xf8a22000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart0: uart@f8b00000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0xf8b00000 0x1000>;
+		interrupts = <0 49 4>;
+		clocks = <&clock HIX5HD2_FIXED_83M>;
+		clock-names = "apb_pclk";
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
new file mode 100644
index 000000000000..3ce97cfe999b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
@@ -0,0 +1,29 @@
+AXM5516 clock driver bindings
+-----------------------------
+
+Required properties :
+- compatible : shall contain "lsi,axm5516-clks"
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+
+The consumer specifies the desired clock by having the clock ID in its "clocks"
+phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
+supported clock IDs.
+
+Example:
+
+	clks: clock-controller@2010020000 {
+		compatible = "lsi,axm5516-clks";
+		#clock-cells = <1>;
+		reg = <0x20 0x10020000 0 0x20000>;
+	};
+
+	serial0: uart@2010080000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x20 0x10080000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks AXXIA_CLK_PER>;
+		clock-names = "apb_pclk";
+	};
+																																};
+
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
index 307a503c5db8..dc5ea5b22da9 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -29,6 +29,11 @@ The following is a list of provided IDs and clock names on Kirkwood and Dove:
  2 = l2clk  (L2 Cache clock derived from CPU0 clock)
  3 = ddrclk (DDR controller clock derived from CPU0 clock)
 
+The following is a list of provided IDs and clock names on Orion5x:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = ddrclk (DDR controller clock derived from CPU0 clock)
+
 Required properties:
 - compatible : shall be one of the following:
 	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
@@ -38,6 +43,9 @@ Required properties:
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
 	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+	"marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
+	"marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
+	"marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
 - reg : shall be the register address of the Sample-At-Reset (SAR) register
 - #clock-cells : from common clock binding; shall be set to 1
 
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 767401f42871..9cfcb4f2bc97 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -4,9 +4,12 @@ Qualcomm Global Clock & Reset Controller Binding
 Required properties :
 - compatible : shall contain only one of the following:
 
+			"qcom,gcc-apq8064"
 			"qcom,gcc-msm8660"
 			"qcom,gcc-msm8960"
 			"qcom,gcc-msm8974"
+			"qcom,gcc-msm8974pro"
+			"qcom,gcc-msm8974pro-ac"
 
 - reg : shall contain base register location and length
 - #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
index 6c3c0847e4fd..8a92b5fb3540 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -11,6 +11,7 @@ Required Properties:
 
   - compatible: Must be one of the following
     - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+    - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
     - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
     - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
new file mode 100644
index 000000000000..2c03302f86ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
@@ -0,0 +1,41 @@
+These bindings should be considered EXPERIMENTAL for now.
+
+* Renesas R8A7740  Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs
+and several fixed ratio and variable ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a7740-cpg-clocks"
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the three parent clocks
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are
+    "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b",
+    "m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp".
+
+  - renesas,mode: board-specific settings of the MD_CK* bits
+
+
+Example
+-------
+
+cpg_clocks: cpg_clocks@e6150000 {
+        compatible = "renesas,r8a7740-cpg-clocks";
+        reg = <0xe6150000 0x10000>;
+        clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+        #clock-cells = <1>;
+        clock-output-names = "system", "pllc0", "pllc1",
+                             "pllc2", "r",
+                             "usb24s",
+                             "i", "zg", "b", "m1", "hp",
+                             "hpp", "usbp", "s", "zb", "m3",
+                             "cp";
+};
+
+&cpg_clocks {
+	renesas,mode = <0x05>;
+};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
new file mode 100644
index 000000000000..ed3c8cb12f4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
@@ -0,0 +1,27 @@
+* Renesas R8A7779 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A7779. It includes one PLL and
+several fixed ratio dividers
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a7779-cpg-clocks"
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clock
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are "plla",
+    "z", "zs", "s", "s1", "p", "b", "out".
+
+
+Example
+-------
+
+	cpg_clocks: cpg_clocks@ffc80000 {
+		compatible = "renesas,r8a7779-cpg-clocks";
+		reg = <0 0xffc80000 0 0x30>;
+		clocks = <&extal_clk>;
+		#clock-cells = <1>;
+		clock-output-names = "plla", "z", "zs", "s", "s1", "p",
+		                     "b", "out";
+	};
diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
new file mode 100644
index 000000000000..91b3a3467150
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
@@ -0,0 +1,43 @@
+* Allwinner sunxi MMC controller
+
+The highspeed MMC host controller on Allwinner SoCs provides an interface
+for MMC, SD and SDIO types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.5 as well
+as the speed of SD standard 3.0.
+Absolute maximum transfer rate is 200MB/s
+
+Required properties:
+ - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
+ - reg : mmc controller base registers
+ - clocks : a list with 2 phandle + clock specifier pairs
+ - clock-names : must contain "ahb" and "mmc"
+ - interrupts : mmc controller interrupt
+
+Optional properties:
+ - resets : phandle + reset specifier pair
+ - reset-names : must contain "ahb"
+ - for cd, bus-width and additional generic mmc parameters
+   please refer to mmc.txt within this directory
+
+Examples:
+	- Within .dtsi:
+	mmc0: mmc@01c0f000 {
+		compatible = "allwinner,sun5i-a13-mmc";
+		reg = <0x01c0f000 0x1000>;
+		clocks = <&ahb_gates 8>, <&mmc0_clk>;
+		clock-names = "ahb", "mod";
+		interrupts = <0 32 4>;
+		status = "disabled";
+	};
+
+	- Within dts:
+	mmc0: mmc@01c0f000 {
+		pinctrl-names = "default", "default";
+		pinctrl-0 = <&mmc0_pins_a>;
+		pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+		bus-width = <4>;
+		cd-gpios = <&pio 7 1 0>; /* PH1 */
+		cd-inverted;
+		status = "okay";
+	};