Merge tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver update from Greg KH:
 "Here's the big tty/serial driver update for 3.15-rc1.

  Nothing major, a number of serial driver updates and a few tty core
  fixes as well.

  All have been in linux-next for a while"

* tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
  tty/serial: omap: empty the RX FIFO at the end of half-duplex TX
  tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX
  serial: sh-sci: Neaten dev_<level> uses
  serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF
  serial: sh-sci: Add more register documentation
  serial: sh-sci: Remove useless casts
  serial: sh-sci: Replace printk() by pr_*()
  serial_core: Avoid NULL pointer dereference in uart_close()
  serial_core: Get a reference for port->tty in uart_remove_one_port()
  serial: clps711x: Give a chance to perform useful tasks during wait loop
  serial_core: Grammar s/ports/port's/
  serial_core: Spelling s/contro/control/
  serial: efm32: properly namespace location property
  serial: max310x: Add missing #include <linux/uaccess.h>
  synclink: fix info leak in ioctl
  serial: 8250: Clean up the locking for -rt
  serial: 8250_pci: change BayTrail default uartclk
  serial: 8250_pci: more BayTrail error-free bauds
  serial: sh-sci: Add missing call to uart_remove_one_port() in failure path
  serial_core: Unregister console in uart_remove_one_port()
  ...

4 files changed, 56 insertions, 7 deletions

diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt
index 8e080b893b49..1984bdfbd545 100644
--- a/Documentation/devicetree/bindings/serial/efm32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt
@@ -6,7 +6,7 @@ Required properties:
 - interrupts : Should contain uart interrupt
 
 Optional properties:
-- location : Decides the location of the USART I/O pins.
+- efm32,location : Decides the location of the USART I/O pins.
   Allowed range : [0 .. 5]
   Default: 0
 
@@ -16,5 +16,5 @@ uart@0x4000c400 {
 	compatible = "efm32,uart";
 	reg = <0x4000c400 0x400>;
 	interrupts = <15>;
-	location = <0>;
+	efm32,location = <0>;
 };
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
index 6fd1dd1638dd..a1d1205d8185 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
@@ -4,11 +4,24 @@ Required properties:
 - compatible : Should be "fsl,<soc>-lpuart"
 - reg : Address and length of the register set for the device
 - interrupts : Should contain uart interrupt
+- clocks : phandle + clock specifier pairs, one for each entry in clock-names
+- clock-names : should contain: "ipg" - the uart clock
+
+Optional properties:
+- dmas: A list of two dma specifiers, one for each entry in dma-names.
+- dma-names: should contain "tx" and "rx".
+
+Note: Optional properties for DMA support. Write them both or both not.
 
 Example:
 
 uart0: serial@40027000 {
-	       compatible = "fsl,vf610-lpuart";
-	       reg = <0x40027000 0x1000>;
-	       interrupts = <0 61 0x00>;
-       };
+		compatible = "fsl,vf610-lpuart";
+		reg = <0x40027000 0x1000>;
+		interrupts = <0 61 0x00>;
+		clocks = <&clks VF610_CLK_UART0>;
+		clock-names = "ipg";
+		dmas = <&edma0 0 2>,
+			<&edma0 0 3>;
+		dma-names = "rx","tx";
+	};
diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
new file mode 100644
index 000000000000..83a919c241b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
@@ -0,0 +1,36 @@
+* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "maxim,max3107" for Maxim MAX3107,
+  - "maxim,max3108" for Maxim MAX3108,
+  - "maxim,max3109" for Maxim MAX3109,
+  - "maxim,max14830" for Maxim MAX14830.
+- reg: SPI chip select number.
+- interrupt-parent: The phandle for the interrupt controller that
+  services interrupts for this IC.
+- interrupts: Specifies the interrupt source of the parent interrupt
+  controller. The format of the interrupt specifier depends on the
+  parent interrupt controller.
+- clocks: phandle to the IC source clock.
+- clock-names: Should be "xtal" if clock is an external crystal or
+  "osc" if an external clock source is used.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+	max14830: max14830@0 {
+		compatible = "maxim,max14830";
+		reg = <0>;
+		clocks = <&clk20m>;
+		clock-names = "osc";
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index f372cf29068d..53e6c175db6c 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -37,7 +37,7 @@ Example:
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;