mfd: s2mps11: Add device tree support

This patch adds DT compatible string for s2mps11 and binding documentation.

Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 89 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
new file mode 100644
index 000000000000..36e051b223c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -0,0 +1,89 @@
+
+* Samsung S2MPS11 Voltage and Current Regulator
+
+The Samsung S2MP211 is a multi-function device which includes voltage and
+current regulators, RTC, charger controller and other sub-blocks. It is
+interfaced to the host controller using a I2C interface. Each sub-block is
+addressed by the host system using different I2C slave address.
+
+Required properties:
+- compatible: Should be "samsung,s2mps11-pmic".
+- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from s2mps11 are delivered to.
+- interrupts: Interrupt specifiers for interrupt sources.
+
+Optional nodes:
+- regulators: The regulators of s2mps11 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+	regulator_name {
+		[standard regulator constraints....];
+	};
+
+ regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
+
+ BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
+ regulator-ramp-delay = <0> can be used for them to disable ramp delay.
+ In absence of regulator-ramp-delay property, default ramp delay will be used.
+
+NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
+for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
+Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6],
+BUCK[3, 4], and BUCK[7, 8, 10]
+
+The regulator constraints inside the regulator nodes use the standard regulator
+bindings which are documented elsewhere.
+
+The following are the names of the regulators that the s2mps11 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s2mps11.
+
+	- LDOn
+		  - valid values for n are 1 to 28
+		  - Example: LDO0, LD01, LDO28
+	- BUCKn
+		  - valid values for n are 1 to 9.
+		  - Example: BUCK1, BUCK2, BUCK9
+
+Example:
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};