summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2013-12-18 16:42:06 -0500
committerDavid S. Miller <davem@davemloft.net>2013-12-18 16:42:06 -0500
commit143c9054949436cb05e468439dc5e46231f33d09 (patch)
treec2e972d8188fb1b36368e9acb5b6b59466c9d903 /Documentation
parent0b6807034791160d5e584138943d2daea765436d (diff)
parent35eecf052250f663f07a4cded7d3503fd1b50729 (diff)
downloadlinux-143c9054949436cb05e468439dc5e46231f33d09.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c drivers/net/macvtap.c Both minor merge hassles, simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-expbuf.xml8
-rw-r--r--Documentation/assoc_array.txt6
-rw-r--r--Documentation/device-mapper/cache.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/omap/mpu.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/pmu.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos4-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5250-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5420-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5440-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/gpio/8xxx_gpio.txt66
-rw-r--r--Documentation/devicetree/bindings/mmc/ti-omap.txt54
-rw-r--r--Documentation/devicetree/bindings/net/fsl-fec.txt2
-rw-r--r--Documentation/devicetree/bindings/net/smsc-lan91c111.txt4
-rw-r--r--Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt5
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--Documentation/gpio/00-INDEX14
-rw-r--r--Documentation/mic/mpssd/mpssd.c18
-rw-r--r--Documentation/networking/ip-sysctl.txt8
19 files changed, 162 insertions, 54 deletions
diff --git a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml
index e287c8fc803b..4165e7bfa4ff 100644
--- a/Documentation/DocBook/media/v4l/vidioc-expbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-expbuf.xml
@@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
format. For the single-planar API, applications must set <structfield> plane
</structfield> to zero. Additional flags may be posted in the <structfield>
flags </structfield> field. Refer to a manual for open() for details.
-Currently only O_CLOEXEC is supported. All other fields must be set to zero.
+Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported. All
+other fields must be set to zero.
In the case of multi-planar API, every plane is exported separately using
multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
@@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
<entry>__u32</entry>
<entry><structfield>flags</structfield></entry>
<entry>Flags for the newly created file, currently only <constant>
-O_CLOEXEC </constant> is supported, refer to the manual of open() for more
-details.</entry>
+O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
+</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
+of open() for more details.</entry>
</row>
<row>
<entry>__s32</entry>
diff --git a/Documentation/assoc_array.txt b/Documentation/assoc_array.txt
index f4faec0f66e4..2f2c6cdd73c0 100644
--- a/Documentation/assoc_array.txt
+++ b/Documentation/assoc_array.txt
@@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided:
(4) Diff the index keys of two objects.
- int (*diff_objects)(const void *a, const void *b);
+ int (*diff_objects)(const void *object, const void *index_key);
- Return the bit position at which the index keys of two objects differ or
- -1 if they are the same.
+ Return the bit position at which the index key of the specified object
+ differs from the given index key or -1 if they are the same.
(5) Free an object.
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index 274752f8bdf9..719320b5ed3f 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -266,10 +266,12 @@ E.g.
Invalidation is removing an entry from the cache without writing it
back. Cache blocks can be invalidated via the invalidate_cblocks
message, which takes an arbitrary number of cblock ranges. Each cblock
-must be expressed as a decimal value, in the future a variant message
-that takes cblock ranges expressed in hexidecimal may be needed to
-better support efficient invalidation of larger caches. The cache must
-be in passthrough mode when invalidate_cblocks is used.
+range's end value is "one past the end", meaning 5-10 expresses a range
+of values from 5 to 9. Each cblock must be expressed as a decimal
+value, in the future a variant message that takes cblock ranges
+expressed in hexidecimal may be needed to better support efficient
+invalidation of larger caches. The cache must be in passthrough mode
+when invalidate_cblocks is used.
invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
index 1a5a42ce21bb..83f405bde138 100644
--- a/Documentation/devicetree/bindings/arm/omap/mpu.txt
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
Required properties:
- compatible : Should be "ti,omap3-mpu" for OMAP3
Should be "ti,omap4-mpu" for OMAP4
+ Should be "ti,omap5-mpu" for OMAP5
- ti,hwmods: "mpu"
Examples:
+- For an OMAP5 SMP system:
+
+mpu {
+ compatible = "ti,omap5-mpu";
+ ti,hwmods = "mpu"
+};
+
- For an OMAP4 SMP system:
mpu {
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
index 343781b9f246..3e1e498fea96 100644
--- a/Documentation/devicetree/bindings/arm/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
Required properties:
- compatible : should be one of
+ "arm,armv8-pmuv3"
"arm,cortex-a15-pmu"
"arm,cortex-a9-pmu"
"arm,cortex-a8-pmu"
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index 47ada1dff216..5d49f2b37f68 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -49,7 +49,7 @@ adc@12D10000 {
/* NTC thermistor is a hwmon device */
ncp15wb473@0 {
compatible = "ntc,ncp15wb473";
- pullup-uV = <1800000>;
+ pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
index c6bf8a6c8f52..a2ac2d9ac71a 100644
--- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
- "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 24765c146e31..46f5c791ea0d 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
- reg: physical base address of the controller and length of memory mapped
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
index 32aa34ecad36..458f34789e5d 100644
--- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
Required Properties:
-- comptible: should be one of the following.
+- compatible: should be one of the following.
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
- reg: physical base address of the controller and length of memory mapped
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
index 4499e9966bc9..9955dc9c7d96 100644
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
Required Properties:
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
- reg: physical base address of the controller and length of memory mapped
region.
diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
index b0019eb5330e..798cfc9d3839 100644
--- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller). See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
- 83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
- services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible: "fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+ for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+ "fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells: Should be two. The first cell is the pin number
+ and the second cell is used to specify optional
+ parameters (currently unused).
+- interrupt-parent: Phandle for the interrupt controller that
+ services interrupts for this device.
+- interrupts: Interrupt mapping for GPIO IRQ.
+- gpio-controller: Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller: Empty boolean property which marks the GPIO
+ module as an IRQ controller.
+- #interrupt-cells: Should be two. Defines the number of integer
+ cells required to specify an interrupt within
+ this interrupt controller. The first cell
+ defines the pin number, the second cell
+ defines additional flags (trigger type,
+ trigger polarity). Note that the available
+ set of trigger conditions supported by the
+ GPIO module depends on the actual SoC.
Example of gpio-controller nodes for a MPC8347 SoC:
@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
- interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
+ interrupts = <74 0x8>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
- interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
+ interrupts = <75 0x8>;
gpio-controller;
};
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
- 2 = trigger on falling edge
- 3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
funkyfpga@0 {
compatible = "funky-fpga";
...
- interrupts = <4 3>;
interrupt-parent = <&gpio1>;
+ interrupts = <4 3>;
};
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt
new file mode 100644
index 000000000000..8de579969763
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt
@@ -0,0 +1,54 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+ instance starting 1
+
+Examples:
+
+ msdi1: mmc@4809c000 {
+ compatible = "ti,omap2420-mmc";
+ ti,hwmods = "msdi1";
+ reg = <0x4809c000 0x80>;
+ interrupts = <83>;
+ dmas = <&sdma 61 &sdma 62>;
+ dma-names = "tx", "rx";
+ };
+
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index d53639221403..845ff848d895 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -15,6 +15,7 @@ Optional properties:
only if property "phy-reset-gpios" is available. Missing the property
will have the duration be 1 millisecond. Numbers greater than 1000 are
invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
Example:
@@ -25,4 +26,5 @@ ethernet@83fec000 {
phy-mode = "mii";
phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
+ phy-supply = <&reg_fec_supply>;
};
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
index 953049b4248a..5a41a8658daa 100644
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
@@ -8,3 +8,7 @@ Required properties:
Optional properties:
- phy-device : phandle to Ethernet phy
- local-mac-address : Ethernet mac address to use
+- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
+ are supported on the device. Valid value for SMSC LAN91c111 are
+ 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning
+ 16-bit access only.
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
deleted file mode 100644
index 6b9e51896693..000000000000
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-NVIDIA Tegra 2 SPI device
-
-Required properties:
-- compatible : should be "nvidia,tegra20-spi".
-- gpios : should specify GPIOs used for chipselect.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ce95ed1c6d3e..edbb8d88c85e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -32,12 +32,14 @@ est ESTeem Wireless Modems
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt Global Mixed-mode Technology, Inc.
hisilicon Hisilicon Limited.
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
img Imagination Technologies Ltd.
intercontrol Inter Control Group
+lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
marvell Marvell Technology Group Ltd.
diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX
new file mode 100644
index 000000000000..1de43ae46ae6
--- /dev/null
+++ b/Documentation/gpio/00-INDEX
@@ -0,0 +1,14 @@
+00-INDEX
+ - This file
+gpio.txt
+ - Introduction to GPIOs and their kernel interfaces
+consumer.txt
+ - How to obtain and use GPIOs in a driver
+driver.txt
+ - How to write a GPIO driver
+board.txt
+ - How to assign GPIOs to a consumer device and a function
+sysfs.txt
+ - Information about the GPIO sysfs interface
+gpio-legacy.txt
+ - Historical documentation of the deprecated GPIO integer interface
diff --git a/Documentation/mic/mpssd/mpssd.c b/Documentation/mic/mpssd/mpssd.c
index 0c980ad40b17..4d17487d5ad9 100644
--- a/Documentation/mic/mpssd/mpssd.c
+++ b/Documentation/mic/mpssd/mpssd.c
@@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
int i;
void *dp = get_dp(mic, type);
- for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
+ for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
i += mic_total_desc_size(d)) {
d = dp + i;
@@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
__func__, mic->name, vr0->va, vr0->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
- vr0->info->magic, MIC_MAGIC + type);
- assert(vr0->info->magic == MIC_MAGIC + type);
+ le32toh(vr0->info->magic), MIC_MAGIC + type);
+ assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
if (vr1) {
vr1->va = (struct mic_vring *)
&va[MIC_DEVICE_PAGE_END + vr_size];
@@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
__func__, mic->name, vr1->va, vr1->info, vr_size,
vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
mpsslog("magic 0x%x expected 0x%x\n",
- vr1->info->magic, MIC_MAGIC + type + 1);
- assert(vr1->info->magic == MIC_MAGIC + type + 1);
+ le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
+ assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
}
done:
return va;
@@ -520,7 +520,7 @@ static void *
virtio_net(void *arg)
{
static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
- static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
+ static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
struct iovec vnet_iov[2][2] = {
{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
{ .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@@ -1412,6 +1412,12 @@ mic_config(void *arg)
}
do {
+ ret = lseek(fd, 0, SEEK_SET);
+ if (ret < 0) {
+ mpsslog("%s: Failed to seek to file start '%s': %s\n",
+ mic->name, pathname, strerror(errno));
+ goto close_error1;
+ }
ret = read(fd, value, sizeof(value));
if (ret < 0) {
mpsslog("%s: Failed to read sysfs entry '%s': %s\n",
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 12ba2cd9f03d..f76d177895d9 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -16,8 +16,12 @@ ip_default_ttl - INTEGER
Default: 64 (as recommended by RFC1700)
ip_no_pmtu_disc - BOOLEAN
- Disable Path MTU Discovery.
- default FALSE
+ Disable Path MTU Discovery. If enabled and a
+ fragmentation-required ICMP is received, the PMTU to this
+ destination will be set to min_pmtu (see below). You will need
+ to raise min_pmtu to the smallest interface MTU on your system
+ manually if you want to avoid locally generated fragments.
+ Default: FALSE
min_pmtu - INTEGER
default 552 - minimum discovered Path MTU