summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorTomasz Figa <t.figa@samsung.com>2012-11-16 15:28:17 +0100
committerChris Ball <cjb@laptop.org>2012-12-06 13:55:01 -0500
commitb96efccb8fc9939605599e5b2c026644973cc92d (patch)
treecac505437daeb67208ede0177573747dd2618990 /Documentation
parentb1b8fea94f4c71b5503b7e29974635121f44b302 (diff)
downloadlinux-b96efccb8fc9939605599e5b2c026644973cc92d.tar.bz2
mmc: host: sdhci-s3c: Add support for pinctrl
This patch adds support for pin configuration using pinctrl subsystem to the sdhci-s3c driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mmc/samsung-sdhci.txt20
1 files changed, 13 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
index 630a7d7f4718..97e9e315400d 100644
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
@@ -12,10 +12,6 @@ is used. The Samsung's SDHCI controller bindings extends this as listed below.
[A] The property "samsung,cd-pinmux-gpio" can be used as stated in the
"Optional Board Specific Properties" section below.
-[B] If core card-detect bindings and "samsung,cd-pinmux-gpio" property
- is not specified, it is assumed that there is no card detection
- mechanism used.
-
Required SoC Specific Properties:
- compatible: should be one of the following
- "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
@@ -24,14 +20,18 @@ Required SoC Specific Properties:
controller.
Required Board Specific Properties:
-- gpios: Should specify the gpios used for clock, command and data lines. The
- gpio specifier format depends on the gpio controller.
+- Samsung GPIO variant (will be completely replaced by pinctrl):
+ - gpios: Should specify the gpios used for clock, command and data lines. The
+ gpio specifier format depends on the gpio controller.
+- Pinctrl variant (preferred if available):
+ - pinctrl-0: Should specify pin control groups used for this controller.
+ - pinctrl-names: Should contain only one value - "default".
Optional Board Specific Properties:
- samsung,cd-pinmux-gpio: Specifies the card detect line that is routed
through a pinmux to the card-detect pin of the card slot. This property
should be used only if none of the mmc core card-detect properties are
- used.
+ used. Only for Samsung GPIO variant.
Example:
sdhci@12530000 {
@@ -40,12 +40,18 @@ Example:
interrupts = <0 75 0>;
bus-width = <4>;
cd-gpios = <&gpk2 2 2 3 3>;
+
+ /* Samsung GPIO variant */
gpios = <&gpk2 0 2 0 3>, /* clock line */
<&gpk2 1 2 0 3>, /* command line */
<&gpk2 3 2 3 3>, /* data line 0 */
<&gpk2 4 2 3 3>, /* data line 1 */
<&gpk2 5 2 3 3>, /* data line 2 */
<&gpk2 6 2 3 3>; /* data line 3 */
+
+ /* Pinctrl variant */
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+ pinctrl-names = "default";
};
Note: This example shows both SoC specific and board specific properties