summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-03 09:10:23 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-03 09:10:23 -0700
commit9992ba72327fa0d8bdc9fb624e80f5cce338a711 (patch)
treee0bf31ae53cb19c44674df7e0d0343a26037ad34 /Documentation
parent00fdffb5131125dce0702bf61e24a806ec3aed80 (diff)
parent4ca231b2e6ed171107c5b21f9e92d1965fd6fd9e (diff)
downloadlinux-9992ba72327fa0d8bdc9fb624e80f5cce338a711.tar.bz2
Merge tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "Mostly many small changes spread as seen in diffstat in sound/* directory by this update. A significant change in the subsystem level is the introduction of snd_soc_component, which will help more generic handling of SoC and off-SoC components. Also, snd_BUG_ON() macro is enabled unconditionally now due to its misuses, so people might hit kernel warnings (it's a good thing for us). - compress-offload: support for capture by Charles Keepax - HD-audio: codec delay support by Dylan Reid - HD-audio: improvements/fixes in generic parser: better headphone mic and headset mic support, jack_modes hint consolidation, proper beep attach/detachment, generalized power filter controls by David Henningsson, et al - HD-audio: Improved management of HDMI codec pins/converters - HD-audio: Better pin/DAC assignment for VIA codecs - HD-audio: Haswell HDMI workarounds - HD-audio: ALC268 codec support, a few new quirks for Chromebooks - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency fix by Clemens Ladisch - USB: support for DSD formats by Daniel Mack - USB: A few UAC2 device endian/cock fixes by Eldad Zack - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller, Yamaha THRxx devices - HDSPM: updates for TCO controls by Adrian Knoth - ASoC: Add a snd_soc_component object type for generic handling of SoC and off-SoC components by Kuninori Morimoto, - dmaengine: a large set of cleanups and conversions by Lars-Peter Clausen - ASoC DAPM: performance optimizations from Ryo Tsutsui - ASoC DAPM: support for mixer control sharing by Stephen Warren - ASoC: multiplatform ARM cleanups from Arnd Bergmann - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits) ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats ALSA: pcm_format_to_bits strong-typed conversion ALSA: compress: fix the states to check for allowing read ALSA: hda - Move Thinkpad X220 to use auto parser ALSA: USB: adjust for changed 3.8 USB API ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources sound: oss/dmabuf: use dma_map_single ALSA: ali5451: use mdelay instead of large udelay constants ALSA: hda - Add the support for ALC286 codec ALSA: usb-audio: USB quirk for Yamaha THR10C ALSA: usb-audio: USB quirk for Yamaha THR5A ALSA: usb-audio: USB quirk for Yamaha THR10 ALSA: usb-audio: Fix autopm error during probing ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT ALSA: sound kconfig typo ALSA: emu10k1: Fix dock firmware loading ASoC: ux500: forward declare msp_i2s_platform_data ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/DocBook/writing-an-alsa-driver.tmpl12
-rw-r--r--Documentation/devicetree/bindings/sound/ak5386.txt19
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt26
-rw-r--r--Documentation/devicetree/bindings/sound/ti,tas5086.txt32
-rw-r--r--Documentation/sound/alsa/HD-Audio.txt10
5 files changed, 83 insertions, 16 deletions
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index bd6fee22c4dd..06741e925985 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -6164,14 +6164,12 @@ struct _snd_pcm_runtime {
<para>
The macro takes an conditional expression to evaluate.
- When <constant>CONFIG_SND_DEBUG</constant>, is set, the
- expression is actually evaluated. If it's non-zero, it shows
- the warning message such as
+ When <constant>CONFIG_SND_DEBUG</constant>, is set, if the
+ expression is non-zero, it shows the warning message such as
<computeroutput>BUG? (xxx)</computeroutput>
- normally followed by stack trace. It returns the evaluated
- value.
- When no <constant>CONFIG_SND_DEBUG</constant> is set, this
- macro always returns zero.
+ normally followed by stack trace.
+
+ In both cases it returns the evaluated value.
</para>
</section>
diff --git a/Documentation/devicetree/bindings/sound/ak5386.txt b/Documentation/devicetree/bindings/sound/ak5386.txt
new file mode 100644
index 000000000000..dc3914fe6ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak5386.txt
@@ -0,0 +1,19 @@
+AK5386 Single-ended 24-Bit 192kHz delta-sigma ADC
+
+This device has no control interface.
+
+Required properties:
+
+ - compatible : "asahi-kasei,ak5386"
+
+Optional properties:
+
+ - reset-gpio : a GPIO spec for the reset/power down pin.
+ If specified, it will be deasserted at probe time.
+
+Example:
+
+spdif: ak5386@0 {
+ compatible = "asahi-kasei,ak5386";
+ reset-gpio = <&gpio0 23>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 1ac7b1642186..0e5c12c66523 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -1,12 +1,22 @@
NVIDIA Tegra30 AHUB (Audio Hub)
Required properties:
-- compatible : "nvidia,tegra30-ahub"
+- compatible : "nvidia,tegra30-ahub", "nvidia,tegra114-ahub", etc.
- reg : Should contain the register physical address and length for each of
- the AHUB's APBIF registers and the AHUB's own registers.
+ the AHUB's register blocks.
+ - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
+ - Tegra114 requires an additional entry, for the APBIF2 register block.
- interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for the first APBIF channel.
+- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
+ entry contains the Tegra DMA controller's phandle and request selector.
+ If a single entry is present, the request selectors for the channels are
+ assumed to be contiguous, and increment from this value.
+ If multiple values are given, one value must be given per channel.
+- clocks : Must contain an entry for each required entry in clock-names.
+- clock-names : Must include the following entries:
+ - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
+ dam1, dam2, spdif_in.
+ - Tegra114: Additionally requires amx, adx.
- ranges : The bus address mapping for the configlink register bus.
Can be empty since the mapping is 1:1.
- #address-cells : For the configlink bus. Should be <1>;
@@ -25,7 +35,13 @@ ahub@70080000 {
reg = <0x70080000 0x200 0x70080200 0x100>;
interrupts = < 0 103 0x04 >;
nvidia,dma-request-selector = <&apbdma 1>;
-
+ clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
+ <&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
+ <&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
+ <&tegra_car 110>, <&tegra_car 162>;
+ clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ "i2s3", "i2s4", "dam0", "dam1", "dam2",
+ "spdif_in";
ranges;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/sound/ti,tas5086.txt b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
new file mode 100644
index 000000000000..8ea4f5b4818d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
@@ -0,0 +1,32 @@
+Texas Instruments TAS5086 6-channel PWM Processor
+
+Required properties:
+
+ - compatible: Should contain "ti,tas5086".
+ - reg: The i2c address. Should contain <0x1b>.
+
+Optional properties:
+
+ - reset-gpio: A GPIO spec to define which pin is connected to the
+ chip's !RESET pin. If specified, the driver will
+ assert a hardware reset at probe time.
+
+ - ti,charge-period: This property should contain the time in microseconds
+ that closely matches the external single-ended
+ split-capacitor charge period. The hardware chip
+ waits for this period of time before starting the
+ PWM signals. This helps reduce pops and clicks.
+
+ When not specified, the hardware default of 1300ms
+ is retained.
+
+Examples:
+
+ i2c_bus {
+ tas5086@1b {
+ compatible = "ti,tas5086";
+ reg = <0x1b>;
+ reset-gpio = <&gpio 23 0>;
+ ti,charge-period = <156000>;
+ };
+ };
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index d4faa63ff352..c3c912d023cc 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -461,11 +461,13 @@ The generic parser supports the following hints:
the corresponding mixer control, if available
- add_stereo_mix_input (bool): add the stereo mix (analog-loopback
mix) to the input mux if available
-- add_out_jack_modes (bool): add "xxx Jack Mode" enum controls to each
- output jack for allowing to change the headphone amp capability
-- add_in_jack_modes (bool): add "xxx Jack Mode" enum controls to each
- input jack for allowing to change the mic bias vref
+- add_jack_modes (bool): add "xxx Jack Mode" enum controls to each
+ I/O jack for allowing to change the headphone amp and mic bias VREF
+ capabilities
- power_down_unused (bool): power down the unused widgets
+- add_hp_mic (bool): add the headphone to capture source if possible
+- hp_mic_detect (bool): enable/disable the hp/mic shared input for a
+ single built-in mic case; default true
- mixer_nid (int): specifies the widget NID of the analog-loopback
mixer