Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	drivers/net/wireless/ath/ath9k/recv.c

3 files changed, 42 insertions, 0 deletions

diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 46ad6faee9ab..044b76436e83 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -98,6 +98,8 @@
 !Finclude/net/cfg80211.h priv_to_wiphy
 !Finclude/net/cfg80211.h set_wiphy_dev
 !Finclude/net/cfg80211.h wdev_priv
+!Finclude/net/cfg80211.h ieee80211_iface_limit
+!Finclude/net/cfg80211.h ieee80211_iface_combination
       </chapter>
       <chapter>
       <title>Actions and configuration</title>
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 10378cc48374..04356f5bc3af 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -353,6 +353,7 @@ Your cooperation is appreciated.
 		133 = /dev/exttrp	External device trap
 		134 = /dev/apm_bios	Advanced Power Management BIOS
 		135 = /dev/rtc		Real Time Clock
+		137 = /dev/vhci		Bluetooth virtual HCI driver
 		139 = /dev/openprom	SPARC OpenBoot PROM
 		140 = /dev/relay8	Berkshire Products Octal relay card
 		141 = /dev/relay16	Berkshire Products ISO-16 relay card
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
new file mode 100644
index 000000000000..189ae5cad8f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -0,0 +1,39 @@
+* Texas Instruments wl1251 wireless lan controller
+
+The wl1251 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible :        Should be "ti,wl1251"
+- reg :               Chip select address of device
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz
+- interrupts :        Should contain interrupt line
+- interrupt-parent :  Should be the phandle for the interrupt controller
+                      that services interrupts for this device
+- vio-supply :        phandle to regulator providing VIO
+- ti,power-gpio :     GPIO connected to chip's PMEN pin
+
+Optional properties:
+- ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
+                         provides configuration data (calibration, MAC, ...)
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+  for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+	wl1251@0 {
+		compatible = "ti,wl1251";
+
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+		spi-cpol;
+		spi-cpha;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+		vio-supply = <&vio>;
+		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+	};
+};