kvm: Documentation: remove ia64

kvm/ia64 is gone, clean up Documentation too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 22 insertions, 23 deletions

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 7a943c23db1c..80bfe59fc992 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -607,7 +607,7 @@ struct kvm_fpu {
 4.24 KVM_CREATE_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP, KVM_CAP_S390_IRQCHIP (s390)
-Architectures: x86, ia64, ARM, arm64, s390
+Architectures: x86, ARM, arm64, s390
 Type: vm ioctl
 Parameters: none
 Returns: 0 on success, -1 on error
@@ -615,7 +615,7 @@ Returns: 0 on success, -1 on error
 Creates an interrupt controller model in the kernel.  On x86, creates a virtual
 ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
 local APIC.  IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
-only go to the IOAPIC.  On ia64, a IOSAPIC is created. On ARM/arm64, a GIC is
+only go to the IOAPIC.  On ARM/arm64, a GIC is
 created. On s390, a dummy irq routing table is created.
 
 Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be enabled
@@ -625,7 +625,7 @@ before KVM_CREATE_IRQCHIP can be used.
 4.25 KVM_IRQ_LINE
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64, arm, arm64
+Architectures: x86, arm, arm64
 Type: vm ioctl
 Parameters: struct kvm_irq_level
 Returns: 0 on success, -1 on error
@@ -679,7 +679,7 @@ struct kvm_irq_level {
 4.26 KVM_GET_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_irqchip (in/out)
 Returns: 0 on success, -1 on error
@@ -701,7 +701,7 @@ struct kvm_irqchip {
 4.27 KVM_SET_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_irqchip (in)
 Returns: 0 on success, -1 on error
@@ -994,7 +994,7 @@ for vm-wide capabilities.
 4.38 KVM_GET_MP_STATE
 
 Capability: KVM_CAP_MP_STATE
-Architectures: x86, ia64, s390
+Architectures: x86, s390
 Type: vcpu ioctl
 Parameters: struct kvm_mp_state (out)
 Returns: 0 on success; -1 on error
@@ -1008,16 +1008,15 @@ uniprocessor guests).
 
 Possible values are:
 
- - KVM_MP_STATE_RUNNABLE:        the vcpu is currently running [x86, ia64]
+ - KVM_MP_STATE_RUNNABLE:        the vcpu is currently running [x86]
  - KVM_MP_STATE_UNINITIALIZED:   the vcpu is an application processor (AP)
-                                 which has not yet received an INIT signal [x86,
-                                 ia64]
+                                 which has not yet received an INIT signal [x86]
  - KVM_MP_STATE_INIT_RECEIVED:   the vcpu has received an INIT signal, and is
-                                 now ready for a SIPI [x86, ia64]
+                                 now ready for a SIPI [x86]
  - KVM_MP_STATE_HALTED:          the vcpu has executed a HLT instruction and
-                                 is waiting for an interrupt [x86, ia64]
+                                 is waiting for an interrupt [x86]
  - KVM_MP_STATE_SIPI_RECEIVED:   the vcpu has just received a SIPI (vector
-                                 accessible via KVM_GET_VCPU_EVENTS) [x86, ia64]
+                                 accessible via KVM_GET_VCPU_EVENTS) [x86]
  - KVM_MP_STATE_STOPPED:         the vcpu is stopped [s390]
  - KVM_MP_STATE_CHECK_STOP:      the vcpu is in a special error state [s390]
  - KVM_MP_STATE_OPERATING:       the vcpu is operating (running or halted)
@@ -1025,7 +1024,7 @@ Possible values are:
  - KVM_MP_STATE_LOAD:            the vcpu is in a special load/startup state
                                  [s390]
 
-On x86 and ia64, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
+On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
 in-kernel irqchip, the multiprocessing state must be maintained by userspace on
 these architectures.
 
@@ -1033,7 +1032,7 @@ these architectures.
 4.39 KVM_SET_MP_STATE
 
 Capability: KVM_CAP_MP_STATE
-Architectures: x86, ia64, s390
+Architectures: x86, s390
 Type: vcpu ioctl
 Parameters: struct kvm_mp_state (in)
 Returns: 0 on success; -1 on error
@@ -1041,7 +1040,7 @@ Returns: 0 on success; -1 on error
 Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for
 arguments.
 
-On x86 and ia64, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
+On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
 in-kernel irqchip, the multiprocessing state must be maintained by userspace on
 these architectures.
 
@@ -1068,7 +1067,7 @@ documentation when it pops into existence).
 4.41 KVM_SET_BOOT_CPU_ID
 
 Capability: KVM_CAP_SET_BOOT_CPU_ID
-Architectures: x86, ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: unsigned long vcpu_id
 Returns: 0 on success, -1 on error
@@ -1261,7 +1260,7 @@ The flags bitmap is defined as:
 4.48 KVM_ASSIGN_PCI_DEVICE
 
 Capability: none
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_pci_dev (in)
 Returns: 0 on success, -1 on error
@@ -1311,7 +1310,7 @@ Errors:
 4.49 KVM_DEASSIGN_PCI_DEVICE
 
 Capability: none
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_pci_dev (in)
 Returns: 0 on success, -1 on error
@@ -1330,7 +1329,7 @@ Errors:
 4.50 KVM_ASSIGN_DEV_IRQ
 
 Capability: KVM_CAP_ASSIGN_DEV_IRQ
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_irq (in)
 Returns: 0 on success, -1 on error
@@ -1370,7 +1369,7 @@ Errors:
 4.51 KVM_DEASSIGN_DEV_IRQ
 
 Capability: KVM_CAP_ASSIGN_DEV_IRQ
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_irq (in)
 Returns: 0 on success, -1 on error
@@ -1385,7 +1384,7 @@ KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
 4.52 KVM_SET_GSI_ROUTING
 
 Capability: KVM_CAP_IRQ_ROUTING
-Architectures: x86 ia64 s390
+Architectures: x86 s390
 Type: vm ioctl
 Parameters: struct kvm_irq_routing (in)
 Returns: 0 on success, -1 on error
@@ -1444,7 +1443,7 @@ struct kvm_irq_routing_s390_adapter {
 4.53 KVM_ASSIGN_SET_MSIX_NR
 
 Capability: none
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_msix_nr (in)
 Returns: 0 on success, -1 on error
@@ -1466,7 +1465,7 @@ struct kvm_assigned_msix_nr {
 4.54 KVM_ASSIGN_SET_MSIX_ENTRY
 
 Capability: none
-Architectures: x86 ia64
+Architectures: x86
 Type: vm ioctl
 Parameters: struct kvm_assigned_msix_entry (in)
 Returns: 0 on success, -1 on error