diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/uml | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/uml')
-rw-r--r-- | Documentation/uml/UserModeLinux-HOWTO.txt | 4686 |
1 files changed, 4686 insertions, 0 deletions
diff --git a/Documentation/uml/UserModeLinux-HOWTO.txt b/Documentation/uml/UserModeLinux-HOWTO.txt new file mode 100644 index 000000000000..0c7b654fec99 --- /dev/null +++ b/Documentation/uml/UserModeLinux-HOWTO.txt @@ -0,0 +1,4686 @@ + User Mode Linux HOWTO + User Mode Linux Core Team + Mon Nov 18 14:16:16 EST 2002 + + This document describes the use and abuse of Jeff Dike's User Mode + Linux: a port of the Linux kernel as a normal Intel Linux process. + ______________________________________________________________________ + + Table of Contents + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 1. Introduction + + 1.1 How is User Mode Linux Different? + 1.2 Why Would I Want User Mode Linux? + + 2. Compiling the kernel and modules + + 2.1 Compiling the kernel + 2.2 Compiling and installing kernel modules + 2.3 Compiling and installing uml_utilities + + 3. Running UML and logging in + + 3.1 Running UML + 3.2 Logging in + 3.3 Examples + + 4. UML on 2G/2G hosts + + 4.1 Introduction + 4.2 The problem + 4.3 The solution + + 5. Setting up serial lines and consoles + + 5.1 Specifying the device + 5.2 Specifying the channel + 5.3 Examples + + 6. Setting up the network + + 6.1 General setup + 6.2 Userspace daemons + 6.3 Specifying ethernet addresses + 6.4 UML interface setup + 6.5 Multicast + 6.6 TUN/TAP with the uml_net helper + 6.7 TUN/TAP with a preconfigured tap device + 6.8 Ethertap + 6.9 The switch daemon + 6.10 Slip + 6.11 Slirp + 6.12 pcap + 6.13 Setting up the host yourself + + 7. Sharing Filesystems between Virtual Machines + + 7.1 A warning + 7.2 Using layered block devices + 7.3 Note! + 7.4 Another warning + 7.5 uml_moo : Merging a COW file with its backing file + + 8. Creating filesystems + + 8.1 Create the filesystem file + 8.2 Assign the file to a UML device + 8.3 Creating and mounting the filesystem + + 9. Host file access + + 9.1 Using hostfs + 9.2 hostfs as the root filesystem + 9.3 Building hostfs + + 10. The Management Console + 10.1 version + 10.2 halt and reboot + 10.3 config + 10.4 remove + 10.5 sysrq + 10.6 help + 10.7 cad + 10.8 stop + 10.9 go + + 11. Kernel debugging + + 11.1 Starting the kernel under gdb + 11.2 Examining sleeping processes + 11.3 Running ddd on UML + 11.4 Debugging modules + 11.5 Attaching gdb to the kernel + 11.6 Using alternate debuggers + + 12. Kernel debugging examples + + 12.1 The case of the hung fsck + 12.2 Episode 2: The case of the hung fsck + + 13. What to do when UML doesn't work + + 13.1 Strange compilation errors when you build from source + 13.2 UML hangs on boot after mounting devfs + 13.3 A variety of panics and hangs with /tmp on a reiserfs filesystem + 13.4 The compile fails with errors about conflicting types for 'open', 'dup', and 'waitpid' + 13.5 UML doesn't work when /tmp is an NFS filesystem + 13.6 UML hangs on boot when compiled with gprof support + 13.7 syslogd dies with a SIGTERM on startup + 13.8 TUN/TAP networking doesn't work on a 2.4 host + 13.9 You can network to the host but not to other machines on the net + 13.10 I have no root and I want to scream + 13.11 UML build conflict between ptrace.h and ucontext.h + 13.12 The UML BogoMips is exactly half the host's BogoMips + 13.13 When you run UML, it immediately segfaults + 13.14 xterms appear, then immediately disappear + 13.15 Any other panic, hang, or strange behavior + + 14. Diagnosing Problems + + 14.1 Case 1 : Normal kernel panics + 14.2 Case 2 : Tracing thread panics + 14.3 Case 3 : Tracing thread panics caused by other threads + 14.4 Case 4 : Hangs + + 15. Thanks + + 15.1 Code and Documentation + 15.2 Flushing out bugs + 15.3 Buglets and clean-ups + 15.4 Case Studies + 15.5 Other contributions + + + ______________________________________________________________________ + + 11.. IInnttrroodduuccttiioonn + + Welcome to User Mode Linux. It's going to be fun. + + + + 11..11.. HHooww iiss UUsseerr MMooddee LLiinnuuxx DDiiffffeerreenntt?? + + Normally, the Linux Kernel talks straight to your hardware (video + card, keyboard, hard drives, etc), and any programs which run ask the + kernel to operate the hardware, like so: + + + + +-----------+-----------+----+ + | Process 1 | Process 2 | ...| + +-----------+-----------+----+ + | Linux Kernel | + +----------------------------+ + | Hardware | + +----------------------------+ + + + + + The User Mode Linux Kernel is different; instead of talking to the + hardware, it talks to a `real' Linux kernel (called the `host kernel' + from now on), like any other program. Programs can then run inside + User-Mode Linux as if they were running under a normal kernel, like + so: + + + + +----------------+ + | Process 2 | ...| + +-----------+----------------+ + | Process 1 | User-Mode Linux| + +----------------------------+ + | Linux Kernel | + +----------------------------+ + | Hardware | + +----------------------------+ + + + + + + 11..22.. WWhhyy WWoouulldd II WWaanntt UUsseerr MMooddee LLiinnuuxx?? + + + 1. If User Mode Linux crashes, your host kernel is still fine. + + 2. You can run a usermode kernel as a non-root user. + + 3. You can debug the User Mode Linux like any normal process. + + 4. You can run gprof (profiling) and gcov (coverage testing). + + 5. You can play with your kernel without breaking things. + + 6. You can use it as a sandbox for testing new apps. + + 7. You can try new development kernels safely. + + 8. You can run different distributions simultaneously. + + 9. It's extremely fun. + + + + + + 22.. CCoommppiilliinngg tthhee kkeerrnneell aanndd mmoodduulleess + + + + + 22..11.. CCoommppiilliinngg tthhee kkeerrnneell + + + Compiling the user mode kernel is just like compiling any other + kernel. Let's go through the steps, using 2.4.0-prerelease (current + as of this writing) as an example: + + + 1. Download the latest UML patch from + + the download page <http://user-mode-linux.sourceforge.net/dl- + sf.html> + + In this example, the file is uml-patch-2.4.0-prerelease.bz2. + + + 2. Download the matching kernel from your favourite kernel mirror, + such as: + + ftp://ftp.ca.kernel.org/pub/kernel/v2.4/linux-2.4.0-prerelease.tar.bz2 + <ftp://ftp.ca.kernel.org/pub/kernel/v2.4/linux-2.4.0-prerelease.tar.bz2> + . + + + 3. Make a directory and unpack the kernel into it. + + + + host% + mkdir ~/uml + + + + + + + host% + cd ~/uml + + + + + + + host% + tar -xzvf linux-2.4.0-prerelease.tar.bz2 + + + + + + + 4. Apply the patch using + + + + host% + cd ~/uml/linux + + + + host% + bzcat uml-patch-2.4.0-prerelease.bz2 | patch -p1 + + + + + + + 5. Run your favorite config; `make xconfig ARCH=um' is the most + convenient. `make config ARCH=um' and 'make menuconfig ARCH=um' + will work as well. The defaults will give you a useful kernel. If + you want to change something, go ahead, it probably won't hurt + anything. + + + Note: If the host is configured with a 2G/2G address space split + rather than the usual 3G/1G split, then the packaged UML binaries + will not run. They will immediately segfault. See ``UML on 2G/2G + hosts'' for the scoop on running UML on your system. + + + + 6. Finish with `make linux ARCH=um': the result is a file called + `linux' in the top directory of your source tree. + + Make sure that you don't build this kernel in /usr/src/linux. On some + distributions, /usr/include/asm is a link into this pool. The user- + mode build changes the other end of that link, and things that include + <asm/anything.h> stop compiling. + + The sources are also available from cvs at the project's cvs page, + which has directions on getting the sources. You can also browse the + CVS pool from there. + + If you get the CVS sources, you will have to check them out into an + empty directory. You will then have to copy each file into the + corresponding directory in the appropriate kernel pool. + + If you don't have the latest kernel pool, you can get the + corresponding user-mode sources with + + + host% cvs co -r v_2_3_x linux + + + + + where 'x' is the version in your pool. Note that you will not get the + bug fixes and enhancements that have gone into subsequent releases. + + + If you build your own kernel, and want to boot it from one of the + filesystems distributed from this site, then, in nearly all cases, + devfs must be compiled into the kernel and mounted at boot time. The + exception is the SuSE filesystem. For this, devfs must either not be + in the kernel at all, or "devfs=nomount" must be on the kernel command + line. Any disagreement between the kernel and the filesystem being + booted about whether devfs is being used will result in the boot + getting no further than single-user mode. + + + If you don't want to use devfs, you can remove the need for it from a + filesystem by copying /dev from someplace, making a bunch of /dev/ubd + devices: + + + UML# for i in 0 1 2 3 4 5 6 7; do mknod ubd$i b 98 $i; done + + + + + and changing /etc/fstab and /etc/inittab to refer to the non-devfs + devices. + + + + 22..22.. CCoommppiilliinngg aanndd iinnssttaalllliinngg kkeerrnneell mmoodduulleess + + UML modules are built in the same way as the native kernel (with the + exception of the 'ARCH=um' that you always need for UML): + + + host% make modules ARCH=um + + + + + Any modules that you want to load into this kernel need to be built in + the user-mode pool. Modules from the native kernel won't work. + + You can install them by using ftp or something to copy them into the + virtual machine and dropping them into /lib/modules/`uname -r`. + + You can also get the kernel build process to install them as follows: + + 1. with the kernel not booted, mount the root filesystem in the top + level of the kernel pool: + + + host% mount root_fs mnt -o loop + + + + + + + 2. run + + + host% + make modules_install INSTALL_MOD_PATH=`pwd`/mnt ARCH=um + + + + + + + 3. unmount the filesystem + + + host% umount mnt + + + + + + + 4. boot the kernel on it + + + When the system is booted, you can use insmod as usual to get the + modules into the kernel. A number of things have been loaded into UML + as modules, especially filesystems and network protocols and filters, + so most symbols which need to be exported probably already are. + However, if you do find symbols that need exporting, let us + <http://user-mode-linux.sourceforge.net/contacts.html> know, and + they'll be "taken care of". + + + + 22..33.. CCoommppiilliinngg aanndd iinnssttaalllliinngg uummll__uuttiilliittiieess + + Many features of the UML kernel require a user-space helper program, + so a uml_utilities package is distributed separately from the kernel + patch which provides these helpers. Included within this is: + + +o port-helper - Used by consoles which connect to xterms or ports + + +o tunctl - Configuration tool to create and delete tap devices + + +o uml_net - Setuid binary for automatic tap device configuration + + +o uml_switch - User-space virtual switch required for daemon + transport + + The uml_utilities tree is compiled with: + + + host# + make && make install + + + + + Note that UML kernel patches may require a specific version of the + uml_utilities distribution. If you don't keep up with the mailing + lists, ensure that you have the latest release of uml_utilities if you + are experiencing problems with your UML kernel, particularly when + dealing with consoles or command-line switches to the helper programs + + + + + + + + + 33.. RRuunnnniinngg UUMMLL aanndd llooggggiinngg iinn + + + + 33..11.. RRuunnnniinngg UUMMLL + + It runs on 2.2.15 or later, and all 2.4 kernels. + + + Booting UML is straightforward. Simply run 'linux': it will try to + mount the file `root_fs' in the current directory. You do not need to + run it as root. If your root filesystem is not named `root_fs', then + you need to put a `ubd0=root_fs_whatever' switch on the linux command + line. + + + You will need a filesystem to boot UML from. There are a number + available for download from here <http://user-mode- + linux.sourceforge.net/dl-sf.html> . There are also several tools + <http://user-mode-linux.sourceforge.net/fs_making.html> which can be + used to generate UML-compatible filesystem images from media. + The kernel will boot up and present you with a login prompt. + + + Note: If the host is configured with a 2G/2G address space split + rather than the usual 3G/1G split, then the packaged UML binaries will + not run. They will immediately segfault. See ``UML on 2G/2G hosts'' + for the scoop on running UML on your system. + + + + 33..22.. LLooggggiinngg iinn + + + + The prepackaged filesystems have a root account with password 'root' + and a user account with password 'user'. The login banner will + generally tell you how to log in. So, you log in and you will find + yourself inside a little virtual machine. Our filesystems have a + variety of commands and utilities installed (and it is fairly easy to + add more), so you will have a lot of tools with which to poke around + the system. + + There are a couple of other ways to log in: + + +o On a virtual console + + + + Each virtual console that is configured (i.e. the device exists in + /dev and /etc/inittab runs a getty on it) will come up in its own + xterm. If you get tired of the xterms, read ``Setting up serial + lines and consoles'' to see how to attach the consoles to + something else, like host ptys. + + + + +o Over the serial line + + + In the boot output, find a line that looks like: + + + + serial line 0 assigned pty /dev/ptyp1 + + + + + Attach your favorite terminal program to the corresponding tty. I.e. + for minicom, the command would be + + + host% minicom -o -p /dev/ttyp1 + + + + + + + +o Over the net + + + If the network is running, then you can telnet to the virtual + machine and log in to it. See ``Setting up the network'' to learn + about setting up a virtual network. + + When you're done using it, run halt, and the kernel will bring itself + down and the process will exit. + + + 33..33.. EExxaammpplleess + + Here are some examples of UML in action: + + +o A login session <http://user-mode-linux.sourceforge.net/login.html> + + +o A virtual network <http://user-mode-linux.sourceforge.net/net.html> + + + + + + + + 44.. UUMMLL oonn 22GG//22GG hhoossttss + + + + + 44..11.. IInnttrroodduuccttiioonn + + + Most Linux machines are configured so that the kernel occupies the + upper 1G (0xc0000000 - 0xffffffff) of the 4G address space and + processes use the lower 3G (0x00000000 - 0xbfffffff). However, some + machine are configured with a 2G/2G split, with the kernel occupying + the upper 2G (0x80000000 - 0xffffffff) and processes using the lower + 2G (0x00000000 - 0x7fffffff). + + + + + 44..22.. TThhee pprroobblleemm + + + The prebuilt UML binaries on this site will not run on 2G/2G hosts + because UML occupies the upper .5G of the 3G process address space + (0xa0000000 - 0xbfffffff). Obviously, on 2G/2G hosts, this is right + in the middle of the kernel address space, so UML won't even load - it + will immediately segfault. + + + + + 44..33.. TThhee ssoolluuttiioonn + + + The fix for this is to rebuild UML from source after enabling + CONFIG_HOST_2G_2G (under 'General Setup'). This will cause UML to + load itself in the top .5G of that smaller process address space, + where it will run fine. See ``Compiling the kernel and modules'' if + you need help building UML from source. + + + + + + + + + + + 55.. SSeettttiinngg uupp sseerriiaall lliinneess aanndd ccoonnssoolleess + + + It is possible to attach UML serial lines and consoles to many types + of host I/O channels by specifying them on the command line. + + + You can attach them to host ptys, ttys, file descriptors, and ports. + This allows you to do things like + + +o have a UML console appear on an unused host console, + + +o hook two virtual machines together by having one attach to a pty + and having the other attach to the corresponding tty + + +o make a virtual machine accessible from the net by attaching a + console to a port on the host. + + + The general format of the command line option is device=channel. + + + + 55..11.. SSppeecciiffyyiinngg tthhee ddeevviiccee + + Devices are specified with "con" or "ssl" (console or serial line, + respectively), optionally with a device number if you are talking + about a specific device. + + + Using just "con" or "ssl" describes all of the consoles or serial + lines. If you want to talk about console #3 or serial line #10, they + would be "con3" and "ssl10", respectively. + + + A specific device name will override a less general "con=" or "ssl=". + So, for example, you can assign a pty to each of the serial lines + except for the first two like this: + + + ssl=pty ssl0=tty:/dev/tty0 ssl1=tty:/dev/tty1 + + + + + The specificity of the device name is all that matters; order on the + command line is irrelevant. + + + + 55..22.. SSppeecciiffyyiinngg tthhee cchhaannnneell + + There are a number of different types of channels to attach a UML + device to, each with a different way of specifying exactly what to + attach to. + + +o pseudo-terminals - device=pty pts terminals - device=pts + + + This will cause UML to allocate a free host pseudo-terminal for the + device. The terminal that it got will be announced in the boot + log. You access it by attaching a terminal program to the + corresponding tty: + + +o screen /dev/pts/n + + +o screen /dev/ttyxx + + +o minicom -o -p /dev/ttyxx - minicom seems not able to handle pts + devices + + +o kermit - start it up, 'open' the device, then 'connect' + + + + + + +o terminals - device=tty:tty device file + + + This will make UML attach the device to the specified tty (i.e + + + con1=tty:/dev/tty3 + + + + + will attach UML's console 1 to the host's /dev/tty3). If the tty that + you specify is the slave end of a tty/pty pair, something else must + have already opened the corresponding pty in order for this to work. + + + + + + +o xterms - device=xterm + + + UML will run an xterm and the device will be attached to it. + + + + + + +o Port - device=port:port number + + + This will attach the UML devices to the specified host port. + Attaching console 1 to the host's port 9000 would be done like + this: + + + con1=port:9000 + + + + + Attaching all the serial lines to that port would be done similarly: + + + ssl=port:9000 + + + + + You access these devices by telnetting to that port. Each active tel- + net session gets a different device. If there are more telnets to a + port than UML devices attached to it, then the extra telnet sessions + will block until an existing telnet detaches, or until another device + becomes active (i.e. by being activated in /etc/inittab). + + This channel has the advantage that you can both attach multiple UML + devices to it and know how to access them without reading the UML boot + log. It is also unique in allowing access to a UML from remote + machines without requiring that the UML be networked. This could be + useful in allowing public access to UMLs because they would be + accessible from the net, but wouldn't need any kind of network + filtering or access control because they would have no network access. + + + If you attach the main console to a portal, then the UML boot will + appear to hang. In reality, it's waiting for a telnet to connect, at + which point the boot will proceed. + + + + + + +o already-existing file descriptors - device=file descriptor + + + If you set up a file descriptor on the UML command line, you can + attach a UML device to it. This is most commonly used to put the + main console back on stdin and stdout after assigning all the other + consoles to something else: + + + con0=fd:0,fd:1 con=pts + + + + + + + + + +o Nothing - device=null + + + This allows the device to be opened, in contrast to 'none', but + reads will block, and writes will succeed and the data will be + thrown out. + + + + + + +o None - device=none + + + This causes the device to disappear. If you are using devfs, the + device will not appear in /dev. If not, then attempts to open it + will return -ENODEV. + + + + You can also specify different input and output channels for a device + by putting a comma between them: + + + ssl3=tty:/dev/tty2,xterm + + + + + will cause serial line 3 to accept input on the host's /dev/tty3 and + display output on an xterm. That's a silly example - the most common + use of this syntax is to reattach the main console to stdin and stdout + as shown above. + + + If you decide to move the main console away from stdin/stdout, the + initial boot output will appear in the terminal that you're running + UML in. However, once the console driver has been officially + initialized, then the boot output will start appearing wherever you + specified that console 0 should be. That device will receive all + subsequent output. + + + + 55..33.. EExxaammpplleess + + There are a number of interesting things you can do with this + capability. + + + First, this is how you get rid of those bleeding console xterms by + attaching them to host ptys: + + + con=pty con0=fd:0,fd:1 + + + + + This will make a UML console take over an unused host virtual console, + so that when you switch to it, you will see the UML login prompt + rather than the host login prompt: + + + con1=tty:/dev/tty6 + + + + + You can attach two virtual machines together with what amounts to a + serial line as follows: + + Run one UML with a serial line attached to a pty - + + + ssl1=pty + + + + + Look at the boot log to see what pty it got (this example will assume + that it got /dev/ptyp1). + + Boot the other UML with a serial line attached to the corresponding + tty - + + + ssl1=tty:/dev/ttyp1 + + + + + Log in, make sure that it has no getty on that serial line, attach a + terminal program like minicom to it, and you should see the login + prompt of the other virtual machine. + + + 66.. SSeettttiinngg uupp tthhee nneettwwoorrkk + + + + This page describes how to set up the various transports and to + provide a UML instance with network access to the host, other machines + on the local net, and the rest of the net. + + + As of 2.4.5, UML networking has been completely redone to make it much + easier to set up, fix bugs, and add new features. + + + There is a new helper, uml_net, which does the host setup that + requires root privileges. + + + There are currently five transport types available for a UML virtual + machine to exchange packets with other hosts: + + +o ethertap + + +o TUN/TAP + + +o Multicast + + +o a switch daemon + + +o slip + + +o slirp + + +o pcap + + The TUN/TAP, ethertap, slip, and slirp transports allow a UML + instance to exchange packets with the host. They may be directed + to the host or the host may just act as a router to provide access + to other physical or virtual machines. + + + The pcap transport is a synthetic read-only interface, using the + libpcap binary to collect packets from interfaces on the host and + filter them. This is useful for building preconfigured traffic + monitors or sniffers. + + + The daemon and multicast transports provide a completely virtual + network to other virtual machines. This network is completely + disconnected from the physical network unless one of the virtual + machines on it is acting as a gateway. + + + With so many host transports, which one should you use? Here's when + you should use each one: + + +o ethertap - if you want access to the host networking and it is + running 2.2 + + +o TUN/TAP - if you want access to the host networking and it is + running 2.4. Also, the TUN/TAP transport is able to use a + preconfigured device, allowing it to avoid using the setuid uml_net + helper, which is a security advantage. + + +o Multicast - if you want a purely virtual network and you don't want + to set up anything but the UML + + +o a switch daemon - if you want a purely virtual network and you + don't mind running the daemon in order to get somewhat better + performance + + +o slip - there is no particular reason to run the slip backend unless + ethertap and TUN/TAP are just not available for some reason + + +o slirp - if you don't have root access on the host to setup + networking, or if you don't want to allocate an IP to your UML + + +o pcap - not much use for actual network connectivity, but great for + monitoring traffic on the host + + Ethertap is available on 2.4 and works fine. TUN/TAP is preferred + to it because it has better performance and ethertap is officially + considered obsolete in 2.4. Also, the root helper only needs to + run occasionally for TUN/TAP, rather than handling every packet, as + it does with ethertap. This is a slight security advantage since + it provides fewer opportunities for a nasty UML user to somehow + exploit the helper's root privileges. + + + 66..11.. GGeenneerraall sseettuupp + + First, you must have the virtual network enabled in your UML. If are + running a prebuilt kernel from this site, everything is already + enabled. If you build the kernel yourself, under the "Network device + support" menu, enable "Network device support", and then the three + transports. + + + The next step is to provide a network device to the virtual machine. + This is done by describing it on the kernel command line. + + The general format is + + + eth <n> = <transport> , <transport args> + + + + + For example, a virtual ethernet device may be attached to a host + ethertap device as follows: + + + eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254 + + + + + This sets up eth0 inside the virtual machine to attach itself to the + host /dev/tap0, assigns it an ethernet address, and assigns the host + tap0 interface an IP address. + + + + Note that the IP address you assign to the host end of the tap device + must be different than the IP you assign to the eth device inside UML. + If you are short on IPs and don't want to comsume two per UML, then + you can reuse the host's eth IP address for the host ends of the tap + devices. Internally, the UMLs must still get unique IPs for their eth + devices. You can also give the UMLs non-routable IPs (192.168.x.x or + 10.x.x.x) and have the host masquerade them. This will let outgoing + connections work, but incoming connections won't without more work, + such as port forwarding from the host. + Also note that when you configure the host side of an interface, it is + only acting as a gateway. It will respond to pings sent to it + locally, but is not useful to do that since it's a host interface. + You are not talking to the UML when you ping that interface and get a + response. + + + You can also add devices to a UML and remove them at runtime. See the + ``The Management Console'' page for details. + + + The sections below describe this in more detail. + + + Once you've decided how you're going to set up the devices, you boot + UML, log in, configure the UML side of the devices, and set up routes + to the outside world. At that point, you will be able to talk to any + other machines, physical or virtual, on the net. + + + If ifconfig inside UML fails and the network refuses to come up, run + tell you what went wrong. + + + + 66..22.. UUsseerrssppaaccee ddaaeemmoonnss + + You will likely need the setuid helper, or the switch daemon, or both. + They are both installed with the RPM and deb, so if you've installed + either, you can skip the rest of this section. + + + If not, then you need to check them out of CVS, build them, and + install them. The helper is uml_net, in CVS /tools/uml_net, and the + daemon is uml_switch, in CVS /tools/uml_router. They are both built + with a plain 'make'. Both need to be installed in a directory that's + in your path - /usr/bin is recommend. On top of that, uml_net needs + to be setuid root. + + + + 66..33.. SSppeecciiffyyiinngg eetthheerrnneett aaddddrreesssseess + + Below, you will see that the TUN/TAP, ethertap, and daemon interfaces + allow you to specify hardware addresses for the virtual ethernet + devices. This is generally not necessary. If you don't have a + specific reason to do it, you probably shouldn't. If one is not + specified on the command line, the driver will assign one based on the + device IP address. It will provide the address fe:fd:nn:nn:nn:nn + where nn.nn.nn.nn is the device IP address. This is nearly always + sufficient to guarantee a unique hardware address for the device. A + couple of exceptions are: + + +o Another set of virtual ethernet devices are on the same network and + they are assigned hardware addresses using a different scheme which + may conflict with the UML IP address-based scheme + + +o You aren't going to use the device for IP networking, so you don't + assign the device an IP address + + If you let the driver provide the hardware address, you should make + sure that the device IP address is known before the interface is + brought up. So, inside UML, this will guarantee that: + + + + UML# + ifconfig eth0 192.168.0.250 up + + + + + If you decide to assign the hardware address yourself, make sure that + the first byte of the address is even. Addresses with an odd first + byte are broadcast addresses, which you don't want assigned to a + device. + + + + 66..44.. UUMMLL iinntteerrffaaccee sseettuupp + + Once the network devices have been described on the command line, you + should boot UML and log in. + + + The first thing to do is bring the interface up: + + + UML# ifconfig ethn ip-address up + + + + + You should be able to ping the host at this point. + + + To reach the rest of the world, you should set a default route to the + host: + + + UML# route add default gw host ip + + + + + Again, with host ip of 192.168.0.4: + + + UML# route add default gw 192.168.0.4 + + + + + This page used to recommend setting a network route to your local net. + This is wrong, because it will cause UML to try to figure out hardware + addresses of the local machines by arping on the interface to the + host. Since that interface is basically a single strand of ethernet + with two nodes on it (UML and the host) and arp requests don't cross + networks, they will fail to elicit any responses. So, what you want + is for UML to just blindly throw all packets at the host and let it + figure out what to do with them, which is what leaving out the network + route and adding the default route does. + + + Note: If you can't communicate with other hosts on your physical + ethernet, it's probably because of a network route that's + automatically set up. If you run 'route -n' and see a route that + looks like this: + + + + + Destination Gateway Genmask Flags Metric Ref Use Iface + 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 + + + + + with a mask that's not 255.255.255.255, then replace it with a route + to your host: + + + UML# + route del -net 192.168.0.0 dev eth0 netmask 255.255.255.0 + + + + + + + UML# + route add -host 192.168.0.4 dev eth0 + + + + + This, plus the default route to the host, will allow UML to exchange + packets with any machine on your ethernet. + + + + 66..55.. MMuullttiiccaasstt + + The simplest way to set up a virtual network between multiple UMLs is + to use the mcast transport. This was written by Harald Welte and is + present in UML version 2.4.5-5um and later. Your system must have + multicast enabled in the kernel and there must be a multicast-capable + network device on the host. Normally, this is eth0, but if there is + no ethernet card on the host, then you will likely get strange error + messages when you bring the device up inside UML. + + + To use it, run two UMLs with + + + eth0=mcast + + + + + on their command lines. Log in, configure the ethernet device in each + machine with different IP addresses: + + + UML1# ifconfig eth0 192.168.0.254 + + + + + + + UML2# ifconfig eth0 192.168.0.253 + + + + + and they should be able to talk to each other. + + The full set of command line options for this transport are + + + + ethn=mcast,ethernet address,multicast + address,multicast port,ttl + + + + + Harald's original README is here <http://user-mode-linux.source- + forge.net/text/mcast.txt> and explains these in detail, as well as + some other issues. + + + + 66..66.. TTUUNN//TTAAPP wwiitthh tthhee uummll__nneett hheellppeerr + + TUN/TAP is the preferred mechanism on 2.4 to exchange packets with the + host. The TUN/TAP backend has been in UML since 2.4.9-3um. + + + The easiest way to get up and running is to let the setuid uml_net + helper do the host setup for you. This involves insmod-ing the tun.o + module if necessary, configuring the device, and setting up IP + forwarding, routing, and proxy arp. If you are new to UML networking, + do this first. If you're concerned about the security implications of + the setuid helper, use it to get up and running, then read the next + section to see how to have UML use a preconfigured tap device, which + avoids the use of uml_net. + + + If you specify an IP address for the host side of the device, the + uml_net helper will do all necessary setup on the host - the only + requirement is that TUN/TAP be available, either built in to the host + kernel or as the tun.o module. + + The format of the command line switch to attach a device to a TUN/TAP + device is + + + eth <n> =tuntap,,, <IP address> + + + + + For example, this argument will attach the UML's eth0 to the next + available tap device and assign an ethernet address to it based on its + IP address + + + eth0=tuntap,,,192.168.0.254 + + + + + + + Note that the IP address that must be used for the eth device inside + UML is fixed by the routing and proxy arp that is set up on the + TUN/TAP device on the host. You can use a different one, but it won't + work because reply packets won't reach the UML. This is a feature. + It prevents a nasty UML user from doing things like setting the UML IP + to the same as the network's nameserver or mail server. + + + There are a couple potential problems with running the TUN/TAP + transport on a 2.4 host kernel + + +o TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host + kernel or use the ethertap transport. + + +o With an upgraded kernel, TUN/TAP may fail with + + + File descriptor in bad state + + + + + This is due to a header mismatch between the upgraded kernel and the + kernel that was originally installed on the machine. The fix is to + make sure that /usr/src/linux points to the headers for the running + kernel. + + These were pointed out by Tim Robinson <timro at trkr dot net> in + <http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="this uml- + user post"> . + + + + 66..77.. TTUUNN//TTAAPP wwiitthh aa pprreeccoonnffiigguurreedd ttaapp ddeevviiccee + + If you prefer not to have UML use uml_net (which is somewhat + insecure), with UML 2.4.17-11, you can set up a TUN/TAP device + beforehand. The setup needs to be done as root, but once that's done, + there is no need for root assistance. Setting up the device is done + as follows: + + +o Create the device with tunctl (available from the UML utilities + tarball) + + + + + host# tunctl -u uid + + + + + where uid is the user id or username that UML will be run as. This + will tell you what device was created. + + +o Configure the device IP (change IP addresses and device name to + suit) + + + + + host# ifconfig tap0 192.168.0.254 up + + + + + + +o Set up routing and arping if desired - this is my recipe, there are + other ways of doing the same thing + + + host# + bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward' + + host# + route add -host 192.168.0.253 dev tap0 + + + + + + + host# + bash -c 'echo 1 > /proc/sys/net/ipv4/conf/tap0/proxy_arp' + + + + + + + host# + arp -Ds 192.168.0.253 eth0 pub + + + + + Note that this must be done every time the host boots - this configu- + ration is not stored across host reboots. So, it's probably a good + idea to stick it in an rc file. An even better idea would be a little + utility which reads the information from a config file and sets up + devices at boot time. + + +o Rather than using up two IPs and ARPing for one of them, you can + also provide direct access to your LAN by the UML by using a + bridge. + + + host# + brctl addbr br0 + + + + + + + host# + ifconfig eth0 0.0.0.0 promisc up + + + + + + + host# + ifconfig tap0 0.0.0.0 promisc up + + + + + + + host# + ifconfig br0 192.168.0.1 netmask 255.255.255.0 up + + + + + + + + host# + brctl stp br0 off + + + + + + + host# + brctl setfd br0 1 + + + + + + + host# + brctl sethello br0 1 + + + + + + + host# + brctl addif br0 eth0 + + + + + + + host# + brctl addif br0 tap0 + + + + + Note that 'br0' should be setup using ifconfig with the existing IP + address of eth0, as eth0 no longer has its own IP. + + +o + + + Also, the /dev/net/tun device must be writable by the user running + UML in order for the UML to use the device that's been configured + for it. The simplest thing to do is + + + host# chmod 666 /dev/net/tun + + + + + Making it world-writeable looks bad, but it seems not to be + exploitable as a security hole. However, it does allow anyone to cre- + ate useless tap devices (useless because they can't configure them), + which is a DOS attack. A somewhat more secure alternative would to be + to create a group containing all the users who have preconfigured tap + devices and chgrp /dev/net/tun to that group with mode 664 or 660. + + + +o Once the device is set up, run UML with 'eth0=tuntap,device name' + (i.e. 'eth0=tuntap,tap0') on the command line (or do it with the + mconsole config command). + + +o Bring the eth device up in UML and you're in business. + + If you don't want that tap device any more, you can make it non- + persistent with + + + host# tunctl -d tap device + + + + + Finally, tunctl has a -b (for brief mode) switch which causes it to + output only the name of the tap device it created. This makes it + suitable for capture by a script: + + + host# TAP=`tunctl -u 1000 -b` + + + + + + + 66..88.. EEtthheerrttaapp + + Ethertap is the general mechanism on 2.2 for userspace processes to + exchange packets with the kernel. + + + + To use this transport, you need to describe the virtual network device + on the UML command line. The general format for this is + + + eth <n> =ethertap, <device> , <ethernet address> , <tap IP address> + + + + + So, the previous example + + + eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254 + + + + + attaches the UML eth0 device to the host /dev/tap0, assigns it the + ethernet address fe:fd:0:0:0:1, and assigns the IP address + 192.168.0.254 to the tap device. + + + + The tap device is mandatory, but the others are optional. If the + ethernet address is omitted, one will be assigned to it. + + + The presence of the tap IP address will cause the helper to run and do + whatever host setup is needed to allow the virtual machine to + communicate with the outside world. If you're not sure you know what + you're doing, this is the way to go. + + + If it is absent, then you must configure the tap device and whatever + arping and routing you will need on the host. However, even in this + case, the uml_net helper still needs to be in your path and it must be + setuid root if you're not running UML as root. This is because the + tap device doesn't support SIGIO, which UML needs in order to use + something as a source of input. So, the helper is used as a + convenient asynchronous IO thread. + + If you're using the uml_net helper, you can ignore the following host + setup - uml_net will do it for you. You just need to make sure you + have ethertap available, either built in to the host kernel or + available as a module. + + + If you want to set things up yourself, you need to make sure that the + appropriate /dev entry exists. If it doesn't, become root and create + it as follows: + + + mknod /dev/tap <minor> c 36 <minor> + 16 + + + + + For example, this is how to create /dev/tap0: + + + mknod /dev/tap0 c 36 0 + 16 + + + + + You also need to make sure that the host kernel has ethertap support. + If ethertap is enabled as a module, you apparently need to insmod + ethertap once for each ethertap device you want to enable. So, + + + host# + insmod ethertap + + + + + will give you the tap0 interface. To get the tap1 interface, you need + to run + + + host# + insmod ethertap unit=1 -o ethertap1 + + + + + + + + 66..99.. TThhee sswwiittcchh ddaaeemmoonn + + NNoottee: This is the daemon formerly known as uml_router, but which was + renamed so the network weenies of the world would stop growling at me. + + + The switch daemon, uml_switch, provides a mechanism for creating a + totally virtual network. By default, it provides no connection to the + host network (but see -tap, below). + + + The first thing you need to do is run the daemon. Running it with no + arguments will make it listen on a default pair of unix domain + sockets. + + + If you want it to listen on a different pair of sockets, use + + + -unix control socket data socket + + + + + + If you want it to act as a hub rather than a switch, use + + + -hub + + + + + + If you want the switch to be connected to host networking (allowing + the umls to get access to the outside world through the host), use + + + -tap tap0 + + + + + + Note that the tap device must be preconfigured (see "TUN/TAP with a + preconfigured tap device", above). If you're using a different tap + device than tap0, specify that instead of tap0. + + + uml_switch can be backgrounded as follows + + + host% + uml_switch [ options ] < /dev/null > /dev/null + + + + + The reason it doesn't background by default is that it listens to + stdin for EOF. When it sees that, it exits. + + + The general format of the kernel command line switch is + + + + ethn=daemon,ethernet address,socket + type,control socket,data socket + + + + + You can leave off everything except the 'daemon'. You only need to + specify the ethernet address if the one that will be assigned to it + isn't acceptable for some reason. The rest of the arguments describe + how to communicate with the daemon. You should only specify them if + you told the daemon to use different sockets than the default. So, if + you ran the daemon with no arguments, running the UML on the same + machine with + eth0=daemon + + + + + will cause the eth0 driver to attach itself to the daemon correctly. + + + + 66..1100.. SSlliipp + + Slip is another, less general, mechanism for a process to communicate + with the host networking. In contrast to the ethertap interface, + which exchanges ethernet frames with the host and can be used to + transport any higher-level protocol, it can only be used to transport + IP. + + + The general format of the command line switch is + + + + ethn=slip,slip IP + + + + + The slip IP argument is the IP address that will be assigned to the + host end of the slip device. If it is specified, the helper will run + and will set up the host so that the virtual machine can reach it and + the rest of the network. + + + There are some oddities with this interface that you should be aware + of. You should only specify one slip device on a given virtual + machine, and its name inside UML will be 'umn', not 'eth0' or whatever + you specified on the command line. These problems will be fixed at + some point. + + + + 66..1111.. SSlliirrpp + + slirp uses an external program, usually /usr/bin/slirp, to provide IP + only networking connectivity through the host. This is similar to IP + masquerading with a firewall, although the translation is performed in + user-space, rather than by the kernel. As slirp does not set up any + interfaces on the host, or changes routing, slirp does not require + root access or setuid binaries on the host. + + + The general format of the command line switch for slirp is: + + + + ethn=slirp,ethernet address,slirp path + + + + + The ethernet address is optional, as UML will set up the interface + with an ethernet address based upon the initial IP address of the + interface. The slirp path is generally /usr/bin/slirp, although it + will depend on distribution. + + + The slirp program can have a number of options passed to the command + line and we can't add them to the UML command line, as they will be + parsed incorrectly. Instead, a wrapper shell script can be written or + the options inserted into the /.slirprc file. More information on + all of the slirp options can be found in its man pages. + + + The eth0 interface on UML should be set up with the IP 10.2.0.15, + although you can use anything as long as it is not used by a network + you will be connecting to. The default route on UML should be set to + use + + + UML# + route add default dev eth0 + + + + + slirp provides a number of useful IP addresses which can be used by + UML, such as 10.0.2.3 which is an alias for the DNS server specified + in /etc/resolv.conf on the host or the IP given in the 'dns' option + for slirp. + + + Even with a baudrate setting higher than 115200, the slirp connection + is limited to 115200. If you need it to go faster, the slirp binary + needs to be compiled with FULL_BOLT defined in config.h. + + + + 66..1122.. ppccaapp + + The pcap transport is attached to a UML ethernet device on the command + line or with uml_mconsole with the following syntax: + + + + ethn=pcap,host interface,filter + expression,option1,option2 + + + + + The expression and options are optional. + + + The interface is whatever network device on the host you want to + sniff. The expression is a pcap filter expression, which is also what + tcpdump uses, so if you know how to specify tcpdump filters, you will + use the same expressions here. The options are up to two of + 'promisc', control whether pcap puts the host interface into + promiscuous mode. 'optimize' and 'nooptimize' control whether the pcap + expression optimizer is used. + + + Example: + + + + eth0=pcap,eth0,tcp + + eth1=pcap,eth0,!tcp + + + + will cause the UML eth0 to emit all tcp packets on the host eth0 and + the UML eth1 to emit all non-tcp packets on the host eth0. + + + + 66..1133.. SSeettttiinngg uupp tthhee hhoosstt yyoouurrsseellff + + If you don't specify an address for the host side of the ethertap or + slip device, UML won't do any setup on the host. So this is what is + needed to get things working (the examples use a host-side IP of + 192.168.0.251 and a UML-side IP of 192.168.0.250 - adjust to suit your + own network): + + +o The device needs to be configured with its IP address. Tap devices + are also configured with an mtu of 1484. Slip devices are + configured with a point-to-point address pointing at the UML ip + address. + + + host# ifconfig tap0 arp mtu 1484 192.168.0.251 up + + + + + + + host# + ifconfig sl0 192.168.0.251 pointopoint 192.168.0.250 up + + + + + + +o If a tap device is being set up, a route is set to the UML IP. + + + UML# route add -host 192.168.0.250 gw 192.168.0.251 + + + + + + +o To allow other hosts on your network to see the virtual machine, + proxy arp is set up for it. + + + host# arp -Ds 192.168.0.250 eth0 pub + + + + + + +o Finally, the host is set up to route packets. + + + host# echo 1 > /proc/sys/net/ipv4/ip_forward + + + + + + + + + + + 77.. SShhaarriinngg FFiilleessyysstteemmss bbeettwweeeenn VViirrttuuaall MMaacchhiinneess + + + + + 77..11.. AA wwaarrnniinngg + + Don't attempt to share filesystems simply by booting two UMLs from the + same file. That's the same thing as booting two physical machines + from a shared disk. It will result in filesystem corruption. + + + + 77..22.. UUssiinngg llaayyeerreedd bblloocckk ddeevviicceess + + The way to share a filesystem between two virtual machines is to use + the copy-on-write (COW) layering capability of the ubd block driver. + As of 2.4.6-2um, the driver supports layering a read-write private + device over a read-only shared device. A machine's writes are stored + in the private device, while reads come from either device - the + private one if the requested block is valid in it, the shared one if + not. Using this scheme, the majority of data which is unchanged is + shared between an arbitrary number of virtual machines, each of which + has a much smaller file containing the changes that it has made. With + a large number of UMLs booting from a large root filesystem, this + leads to a huge disk space saving. It will also help performance, + since the host will be able to cache the shared data using a much + smaller amount of memory, so UML disk requests will be served from the + host's memory rather than its disks. + + + + + To add a copy-on-write layer to an existing block device file, simply + add the name of the COW file to the appropriate ubd switch: + + + ubd0=root_fs_cow,root_fs_debian_22 + + + + + where 'root_fs_cow' is the private COW file and 'root_fs_debian_22' is + the existing shared filesystem. The COW file need not exist. If it + doesn't, the driver will create and initialize it. Once the COW file + has been initialized, it can be used on its own on the command line: + + + ubd0=root_fs_cow + + + + + The name of the backing file is stored in the COW file header, so it + would be redundant to continue specifying it on the command line. + + + + 77..33.. NNoottee!! + + When checking the size of the COW file in order to see the gobs of + space that you're saving, make sure you use 'ls -ls' to see the actual + disk consumption rather than the length of the file. The COW file is + sparse, so the length will be very different from the disk usage. + Here is a 'ls -l' of a COW file and backing file from one boot and + shutdown: + host% ls -l cow.debian debian2.2 + -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian + -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2 + + + + + Doesn't look like much saved space, does it? Well, here's 'ls -ls': + + + host% ls -ls cow.debian debian2.2 + 880 -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian + 525832 -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2 + + + + + Now, you can see that the COW file has less than a meg of disk, rather + than 492 meg. + + + + 77..44.. AAnnootthheerr wwaarrnniinngg + + Once a filesystem is being used as a readonly backing file for a COW + file, do not boot directly from it or modify it in any way. Doing so + will invalidate any COW files that are using it. The mtime and size + of the backing file are stored in the COW file header at its creation, + and they must continue to match. If they don't, the driver will + refuse to use the COW file. + + + + + If you attempt to evade this restriction by changing either the + backing file or the COW header by hand, you will get a corrupted + filesystem. + + + + + Among other things, this means that upgrading the distribution in a + backing file and expecting that all of the COW files using it will see + the upgrade will not work. + + + + + 77..55.. uummll__mmoooo :: MMeerrggiinngg aa CCOOWW ffiillee wwiitthh iittss bbaacckkiinngg ffiillee + + Depending on how you use UML and COW devices, it may be advisable to + merge the changes in the COW file into the backing file every once in + a while. + + + + + The utility that does this is uml_moo. Its usage is + + + host% uml_moo COW file new backing file + + + + + There's no need to specify the backing file since that information is + already in the COW file header. If you're paranoid, boot the new + merged file, and if you're happy with it, move it over the old backing + file. + + + + + uml_moo creates a new backing file by default as a safety measure. It + also has a destructive merge option which will merge the COW file + directly into its current backing file. This is really only usable + when the backing file only has one COW file associated with it. If + there are multiple COWs associated with a backing file, a -d merge of + one of them will invalidate all of the others. However, it is + convenient if you're short of disk space, and it should also be + noticably faster than a non-destructive merge. + + + + + uml_moo is installed with the UML deb and RPM. If you didn't install + UML from one of those packages, you can also get it from the UML + utilities <http://user-mode-linux.sourceforge.net/dl-sf.html#UML + utilities> tar file in tools/moo. + + + + + + + + + 88.. CCrreeaattiinngg ffiilleessyysstteemmss + + + You may want to create and mount new UML filesystems, either because + your root filesystem isn't large enough or because you want to use a + filesystem other than ext2. + + + This was written on the occasion of reiserfs being included in the + 2.4.1 kernel pool, and therefore the 2.4.1 UML, so the examples will + talk about reiserfs. This information is generic, and the examples + should be easy to translate to the filesystem of your choice. + + + 88..11.. CCrreeaattee tthhee ffiilleessyysstteemm ffiillee + + dd is your friend. All you need to do is tell dd to create an empty + file of the appropriate size. I usually make it sparse to save time + and to avoid allocating disk space until it's actually used. For + example, the following command will create a sparse 100 meg file full + of zeroes. + + + host% + dd if=/dev/zero of=new_filesystem seek=100 count=1 bs=1M + + + + + + + 88..22.. AAssssiiggnn tthhee ffiillee ttoo aa UUMMLL ddeevviiccee + + Add an argument like the following to the UML command line: + + ubd4=new_filesystem + + + + + making sure that you use an unassigned ubd device number. + + + + 88..33.. CCrreeaattiinngg aanndd mmoouunnttiinngg tthhee ffiilleessyysstteemm + + Make sure that the filesystem is available, either by being built into + the kernel, or available as a module, then boot up UML and log in. If + the root filesystem doesn't have the filesystem utilities (mkfs, fsck, + etc), then get them into UML by way of the net or hostfs. + + + Make the new filesystem on the device assigned to the new file: + + + host# mkreiserfs /dev/ubd/4 + + + <----------- MKREISERFSv2 -----------> + + ReiserFS version 3.6.25 + Block size 4096 bytes + Block count 25856 + Used blocks 8212 + Journal - 8192 blocks (18-8209), journal header is in block 8210 + Bitmaps: 17 + Root block 8211 + Hash function "r5" + ATTENTION: ALL DATA WILL BE LOST ON '/dev/ubd/4'! (y/n)y + journal size 8192 (from 18) + Initializing journal - 0%....20%....40%....60%....80%....100% + Syncing..done. + + + + + Now, mount it: + + + UML# + mount /dev/ubd/4 /mnt + + + + + and you're in business. + + + + + + + + + + 99.. HHoosstt ffiillee aacccceessss + + + If you want to access files on the host machine from inside UML, you + can treat it as a separate machine and either nfs mount directories + from the host or copy files into the virtual machine with scp or rcp. + However, since UML is running on the the host, it can access those + files just like any other process and make them available inside the + virtual machine without needing to use the network. + + + This is now possible with the hostfs virtual filesystem. With it, you + can mount a host directory into the UML filesystem and access the + files contained in it just as you would on the host. + + + 99..11.. UUssiinngg hhoossttffss + + To begin with, make sure that hostfs is available inside the virtual + machine with + + + UML# cat /proc/filesystems + + + + . hostfs should be listed. If it's not, either rebuild the kernel + with hostfs configured into it or make sure that hostfs is built as a + module and available inside the virtual machine, and insmod it. + + + Now all you need to do is run mount: + + + UML# mount none /mnt/host -t hostfs + + + + + will mount the host's / on the virtual machine's /mnt/host. + + + If you don't want to mount the host root directory, then you can + specify a subdirectory to mount with the -o switch to mount: + + + UML# mount none /mnt/home -t hostfs -o /home + + + + + will mount the hosts's /home on the virtual machine's /mnt/home. + + + + 99..22.. hhoossttffss aass tthhee rroooott ffiilleessyysstteemm + + It's possible to boot from a directory hierarchy on the host using + hostfs rather than using the standard filesystem in a file. + + To start, you need that hierarchy. The easiest way is to loop mount + an existing root_fs file: + + + host# mount root_fs uml_root_dir -o loop + + + + + You need to change the filesystem type of / in etc/fstab to be + 'hostfs', so that line looks like this: + + /dev/ubd/0 / hostfs defaults 1 1 + + + + + Then you need to chown to yourself all the files in that directory + that are owned by root. This worked for me: + + + host# find . -uid 0 -exec chown jdike {} \; + + + + + Next, make sure that your UML kernel has hostfs compiled in, not as a + module. Then run UML with the boot device pointing at that directory: + + + ubd0=/path/to/uml/root/directory + + + + + UML should then boot as it does normally. + + + 99..33.. BBuuiillddiinngg hhoossttffss + + If you need to build hostfs because it's not in your kernel, you have + two choices: + + + + +o Compiling hostfs into the kernel: + + + Reconfigure the kernel and set the 'Host filesystem' option under + + + +o Compiling hostfs as a module: + + + Reconfigure the kernel and set the 'Host filesystem' option under + be in arch/um/fs/hostfs/hostfs.o. Install that in + /lib/modules/`uname -r`/fs in the virtual machine, boot it up, and + + + UML# insmod hostfs + + + + + + + + + + + + + 1100.. TThhee MMaannaaggeemmeenntt CCoonnssoollee + + + + The UML management console is a low-level interface to the kernel, + somewhat like the i386 SysRq interface. Since there is a full-blown + operating system under UML, there is much greater flexibility possible + than with the SysRq mechanism. + + + There are a number of things you can do with the mconsole interface: + + +o get the kernel version + + +o add and remove devices + + +o halt or reboot the machine + + +o Send SysRq commands + + +o Pause and resume the UML + + + You need the mconsole client (uml_mconsole) which is present in CVS + (/tools/mconsole) in 2.4.5-9um and later, and will be in the RPM in + 2.4.6. + + + You also need CONFIG_MCONSOLE (under 'General Setup') enabled in UML. + When you boot UML, you'll see a line like: + + + mconsole initialized on /home/jdike/.uml/umlNJ32yL/mconsole + + + + + If you specify a unique machine id one the UML command line, i.e. + + + umid=debian + + + + + you'll see this + + + mconsole initialized on /home/jdike/.uml/debian/mconsole + + + + + That file is the socket that uml_mconsole will use to communicate with + UML. Run it with either the umid or the full path as its argument: + + + host% uml_mconsole debian + + + + + or + + + host% uml_mconsole /home/jdike/.uml/debian/mconsole + + + + + You'll get a prompt, at which you can run one of these commands: + + +o version + + +o halt + + +o reboot + + +o config + + +o remove + + +o sysrq + + +o help + + +o cad + + +o stop + + +o go + + + 1100..11.. vveerrssiioonn + + This takes no arguments. It prints the UML version. + + + (mconsole) version + OK Linux usermode 2.4.5-9um #1 Wed Jun 20 22:47:08 EDT 2001 i686 + + + + + There are a couple actual uses for this. It's a simple no-op which + can be used to check that a UML is running. It's also a way of + sending an interrupt to the UML. This is sometimes useful on SMP + hosts, where there's a bug which causes signals to UML to be lost, + often causing it to appear to hang. Sending such a UML the mconsole + version command is a good way to 'wake it up' before networking has + been enabled, as it does not do anything to the function of the UML. + + + + 1100..22.. hhaalltt aanndd rreebboooott + + These take no arguments. They shut the machine down immediately, with + no syncing of disks and no clean shutdown of userspace. So, they are + pretty close to crashing the machine. + + + (mconsole) halt + OK + + + + + + + 1100..33.. ccoonnffiigg + + "config" adds a new device to the virtual machine. Currently the ubd + and network drivers support this. It takes one argument, which is the + device to add, with the same syntax as the kernel command line. + + + + + (mconsole) + config ubd3=/home/jdike/incoming/roots/root_fs_debian22 + + OK + (mconsole) config eth1=mcast + OK + + + + + + + 1100..44.. rreemmoovvee + + "remove" deletes a device from the system. Its argument is just the + name of the device to be removed. The device must be idle in whatever + sense the driver considers necessary. In the case of the ubd driver, + the removed block device must not be mounted, swapped on, or otherwise + open, and in the case of the network driver, the device must be down. + + + (mconsole) remove ubd3 + OK + (mconsole) remove eth1 + OK + + + + + + + 1100..55.. ssyyssrrqq + + This takes one argument, which is a single letter. It calls the + generic kernel's SysRq driver, which does whatever is called for by + that argument. See the SysRq documentation in Documentation/sysrq.txt + in your favorite kernel tree to see what letters are valid and what + they do. + + + + 1100..66.. hheellpp + + "help" returns a string listing the valid commands and what each one + does. + + + + 1100..77.. ccaadd + + This invokes the Ctl-Alt-Del action on init. What exactly this ends + up doing is up to /etc/inittab. Normally, it reboots the machine. + With UML, this is usually not desired, so if a halt would be better, + then find the section of inittab that looks like this + + + # What to do when CTRL-ALT-DEL is pressed. + ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now + + + + + and change the command to halt. + + + + 1100..88.. ssttoopp + + This puts the UML in a loop reading mconsole requests until a 'go' + mconsole command is received. This is very useful for making backups + of UML filesystems, as the UML can be stopped, then synced via 'sysrq + s', so that everything is written to the filesystem. You can then copy + the filesystem and then send the UML 'go' via mconsole. + + + Note that a UML running with more than one CPU will have problems + after you send the 'stop' command, as only one CPU will be held in a + mconsole loop and all others will continue as normal. This is a bug, + and will be fixed. + + + + 1100..99.. ggoo + + This resumes a UML after being paused by a 'stop' command. Note that + when the UML has resumed, TCP connections may have timed out and if + the UML is paused for a long period of time, crond might go a little + crazy, running all the jobs it didn't do earlier. + + + + + + + + + 1111.. KKeerrnneell ddeebbuuggggiinngg + + + NNoottee:: The interface that makes debugging, as described here, possible + is present in 2.4.0-test6 kernels and later. + + + Since the user-mode kernel runs as a normal Linux process, it is + possible to debug it with gdb almost like any other process. It is + slightly different because the kernel's threads are already being + ptraced for system call interception, so gdb can't ptrace them. + However, a mechanism has been added to work around that problem. + + + In order to debug the kernel, you need build it from source. See + ``Compiling the kernel and modules'' for information on doing that. + Make sure that you enable CONFIG_DEBUGSYM and CONFIG_PT_PROXY during + the config. These will compile the kernel with -g, and enable the + ptrace proxy so that gdb works with UML, respectively. + + + + + 1111..11.. SSttaarrttiinngg tthhee kkeerrnneell uunnddeerr ggddbb + + You can have the kernel running under the control of gdb from the + beginning by putting 'debug' on the command line. You will get an + xterm with gdb running inside it. The kernel will send some commands + to gdb which will leave it stopped at the beginning of start_kernel. + At this point, you can get things going with 'next', 'step', or + 'cont'. + + + There is a transcript of a debugging session here <debug- + session.html> , with breakpoints being set in the scheduler and in an + interrupt handler. + 1111..22.. EExxaammiinniinngg sslleeeeppiinngg pprroocceesssseess + + Not every bug is evident in the currently running process. Sometimes, + processes hang in the kernel when they shouldn't because they've + deadlocked on a semaphore or something similar. In this case, when + you ^C gdb and get a backtrace, you will see the idle thread, which + isn't very relevant. + + + What you want is the stack of whatever process is sleeping when it + shouldn't be. You need to figure out which process that is, which is + generally fairly easy. Then you need to get its host process id, + which you can do either by looking at ps on the host or at + task.thread.extern_pid in gdb. + + + Now what you do is this: + + +o detach from the current thread + + + (UML gdb) det + + + + + + +o attach to the thread you are interested in + + + (UML gdb) att <host pid> + + + + + + +o look at its stack and anything else of interest + + + (UML gdb) bt + + + + + Note that you can't do anything at this point that requires that a + process execute, e.g. calling a function + + +o when you're done looking at that process, reattach to the current + thread and continue it + + + (UML gdb) + att 1 + + + + + + + (UML gdb) + c + + + + + Here, specifying any pid which is not the process id of a UML thread + will cause gdb to reattach to the current thread. I commonly use 1, + but any other invalid pid would work. + + + + 1111..33.. RRuunnnniinngg dddddd oonn UUMMLL + + ddd works on UML, but requires a special kludge. The process goes + like this: + + +o Start ddd + + + host% ddd linux + + + + + + +o With ps, get the pid of the gdb that ddd started. You can ask the + gdb to tell you, but for some reason that confuses things and + causes a hang. + + +o run UML with 'debug=parent gdb-pid=<pid>' added to the command line + - it will just sit there after you hit return + + +o type 'att 1' to the ddd gdb and you will see something like + + + 0xa013dc51 in __kill () + + + (gdb) + + + + + + +o At this point, type 'c', UML will boot up, and you can use ddd just + as you do on any other process. + + + + 1111..44.. DDeebbuuggggiinngg mmoodduulleess + + gdb has support for debugging code which is dynamically loaded into + the process. This support is what is needed to debug kernel modules + under UML. + + + Using that support is somewhat complicated. You have to tell gdb what + object file you just loaded into UML and where in memory it is. Then, + it can read the symbol table, and figure out where all the symbols are + from the load address that you provided. It gets more interesting + when you load the module again (i.e. after an rmmod). You have to + tell gdb to forget about all its symbols, including the main UML ones + for some reason, then load then all back in again. + + + There's an easy way and a hard way to do this. The easy way is to use + the umlgdb expect script written by Chandan Kudige. It basically + automates the process for you. + + + First, you must tell it where your modules are. There is a list in + the script that looks like this: + set MODULE_PATHS { + "fat" "/usr/src/uml/linux-2.4.18/fs/fat/fat.o" + "isofs" "/usr/src/uml/linux-2.4.18/fs/isofs/isofs.o" + "minix" "/usr/src/uml/linux-2.4.18/fs/minix/minix.o" + } + + + + + You change that to list the names and paths of the modules that you + are going to debug. Then you run it from the toplevel directory of + your UML pool and it basically tells you what to do: + + + + + ******** GDB pid is 21903 ******** + Start UML as: ./linux <kernel switches> debug gdb-pid=21903 + + + + GNU gdb 5.0rh-5 Red Hat Linux 7.1 + Copyright 2001 Free Software Foundation, Inc. + GDB is free software, covered by the GNU General Public License, and you are + welcome to change it and/or distribute copies of it under certain conditions. + Type "show copying" to see the conditions. + There is absolutely no warranty for GDB. Type "show warranty" for details. + This GDB was configured as "i386-redhat-linux"... + (gdb) b sys_init_module + Breakpoint 1 at 0xa0011923: file module.c, line 349. + (gdb) att 1 + + + + + After you run UML and it sits there doing nothing, you hit return at + the 'att 1' and continue it: + + + Attaching to program: /home/jdike/linux/2.4/um/./linux, process 1 + 0xa00f4221 in __kill () + (UML gdb) c + Continuing. + + + + + At this point, you debug normally. When you insmod something, the + expect magic will kick in and you'll see something like: + + + + + + + + + + + + + + + + + + *** Module hostfs loaded *** + Breakpoint 1, sys_init_module (name_user=0x805abb0 "hostfs", + mod_user=0x8070e00) at module.c:349 + 349 char *name, *n_name, *name_tmp = NULL; + (UML gdb) finish + Run till exit from #0 sys_init_module (name_user=0x805abb0 "hostfs", + mod_user=0x8070e00) at module.c:349 + 0xa00e2e23 in execute_syscall (r=0xa8140284) at syscall_kern.c:411 + 411 else res = EXECUTE_SYSCALL(syscall, regs); + Value returned is $1 = 0 + (UML gdb) + p/x (int)module_list + module_list->size_of_struct + + $2 = 0xa9021054 + (UML gdb) symbol-file ./linux + Load new symbol table from "./linux"? (y or n) y + Reading symbols from ./linux... + done. + (UML gdb) + add-symbol-file /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o 0xa9021054 + + add symbol table from file "/home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o" at + .text_addr = 0xa9021054 + (y or n) y + + Reading symbols from /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o... + done. + (UML gdb) p *module_list + $1 = {size_of_struct = 84, next = 0xa0178720, name = 0xa9022de0 "hostfs", + size = 9016, uc = {usecount = {counter = 0}, pad = 0}, flags = 1, + nsyms = 57, ndeps = 0, syms = 0xa9023170, deps = 0x0, refs = 0x0, + init = 0xa90221f0 <init_hostfs>, cleanup = 0xa902222c <exit_hostfs>, + ex_table_start = 0x0, ex_table_end = 0x0, persist_start = 0x0, + persist_end = 0x0, can_unload = 0, runsize = 0, kallsyms_start = 0x0, + kallsyms_end = 0x0, + archdata_start = 0x1b855 <Address 0x1b855 out of bounds>, + archdata_end = 0xe5890000 <Address 0xe5890000 out of bounds>, + kernel_data = 0xf689c35d <Address 0xf689c35d out of bounds>} + >> Finished loading symbols for hostfs ... + + + + + That's the easy way. It's highly recommended. The hard way is + described below in case you're interested in what's going on. + + + Boot the kernel under the debugger and load the module with insmod or + modprobe. With gdb, do: + + + (UML gdb) p module_list + + + + + This is a list of modules that have been loaded into the kernel, with + the most recently loaded module first. Normally, the module you want + is at module_list. If it's not, walk down the next links, looking at + the name fields until find the module you want to debug. Take the + address of that structure, and add module.size_of_struct (which in + 2.4.10 kernels is 96 (0x60)) to it. Gdb can make this hard addition + for you :-): + + + + (UML gdb) + printf "%#x\n", (int)module_list module_list->size_of_struct + + + + + The offset from the module start occasionally changes (before 2.4.0, + it was module.size_of_struct + 4), so it's a good idea to check the + init and cleanup addresses once in a while, as describe below. Now + do: + + + (UML gdb) + add-symbol-file /path/to/module/on/host that_address + + + + + Tell gdb you really want to do it, and you're in business. + + + If there's any doubt that you got the offset right, like breakpoints + appear not to work, or they're appearing in the wrong place, you can + check it by looking at the module structure. The init and cleanup + fields should look like: + + + init = 0x588066b0 <init_hostfs>, cleanup = 0x588066c0 <exit_hostfs> + + + + + with no offsets on the symbol names. If the names are right, but they + are offset, then the offset tells you how much you need to add to the + address you gave to add-symbol-file. + + + When you want to load in a new version of the module, you need to get + gdb to forget about the old one. The only way I've found to do that + is to tell gdb to forget about all symbols that it knows about: + + + (UML gdb) symbol-file + + + + + Then reload the symbols from the kernel binary: + + + (UML gdb) symbol-file /path/to/kernel + + + + + and repeat the process above. You'll also need to re-enable break- + points. They were disabled when you dumped all the symbols because + gdb couldn't figure out where they should go. + + + + 1111..55.. AAttttaacchhiinngg ggddbb ttoo tthhee kkeerrnneell + + If you don't have the kernel running under gdb, you can attach gdb to + it later by sending the tracing thread a SIGUSR1. The first line of + the console output identifies its pid: + tracing thread pid = 20093 + + + + + When you send it the signal: + + + host% kill -USR1 20093 + + + + + you will get an xterm with gdb running in it. + + + If you have the mconsole compiled into UML, then the mconsole client + can be used to start gdb: + + + (mconsole) (mconsole) config gdb=xterm + + + + + will fire up an xterm with gdb running in it. + + + + 1111..66.. UUssiinngg aalltteerrnnaattee ddeebbuuggggeerrss + + UML has support for attaching to an already running debugger rather + than starting gdb itself. This is present in CVS as of 17 Apr 2001. + I sent it to Alan for inclusion in the ac tree, and it will be in my + 2.4.4 release. + + + This is useful when gdb is a subprocess of some UI, such as emacs or + ddd. It can also be used to run debuggers other than gdb on UML. + Below is an example of using strace as an alternate debugger. + + + To do this, you need to get the pid of the debugger and pass it in + with the + + + If you are using gdb under some UI, then tell it to 'att 1', and + you'll find yourself attached to UML. + + + If you are using something other than gdb as your debugger, then + you'll need to get it to do the equivalent of 'att 1' if it doesn't do + it automatically. + + + An example of an alternate debugger is strace. You can strace the + actual kernel as follows: + + +o Run the following in a shell + + + host% + sh -c 'echo pid=$$; echo -n hit return; read x; exec strace -p 1 -o strace.out' + + + + +o Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out + by the previous command + + +o Hit return in the shell, and UML will start running, and strace + output will start accumulating in the output file. + + Note that this is different from running + + + host% strace ./linux + + + + + That will strace only the main UML thread, the tracing thread, which + doesn't do any of the actual kernel work. It just oversees the vir- + tual machine. In contrast, using strace as described above will show + you the low-level activity of the virtual machine. + + + + + + 1122.. KKeerrnneell ddeebbuuggggiinngg eexxaammpplleess + + 1122..11.. TThhee ccaassee ooff tthhee hhuunngg ffsscckk + + When booting up the kernel, fsck failed, and dropped me into a shell + to fix things up. I ran fsck -y, which hung: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Setting hostname uml [ OK ] + Checking root filesystem + /dev/fhd0 was not cleanly unmounted, check forced. + Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. + + /dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. + (i.e., without -a or -p options) + [ FAILED ] + + *** An error occurred during the file system check. + *** Dropping you to a shell; the system will reboot + *** when you leave the shell. + Give root password for maintenance + (or type Control-D for normal startup): + + [root@uml /root]# fsck -y /dev/fhd0 + fsck -y /dev/fhd0 + Parallelizing fsck version 1.14 (9-Jan-1999) + e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 + /dev/fhd0 contains a file system with errors, check forced. + Pass 1: Checking inodes, blocks, and sizes + Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes + + Inode 19780, i_blocks is 1548, should be 540. Fix? yes + + Pass 2: Checking directory structure + Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes + + Directory inode 11858, block 0, offset 0: directory corrupted + Salvage? yes + + Missing '.' in directory inode 11858. + Fix? yes + + Missing '..' in directory inode 11858. + Fix? yes + + + + + + The standard drill in this sort of situation is to fire up gdb on the + signal thread, which, in this case, was pid 1935. In another window, + I run gdb and attach pid 1935. + + + + + ~/linux/2.3.26/um 1016: gdb linux + GNU gdb 4.17.0.11 with Linux support + Copyright 1998 Free Software Foundation, Inc. + GDB is free software, covered by the GNU General Public License, and you are + welcome to change it and/or distribute copies of it under certain conditions. + Type "show copying" to see the conditions. + There is absolutely no warranty for GDB. Type "show warranty" for details. + This GDB was configured as "i386-redhat-linux"... + + (gdb) att 1935 + Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1935 + 0x100756d9 in __wait4 () + + + + + + + Let's see what's currently running: + + + + (gdb) p current_task.pid + $1 = 0 + + + + + + It's the idle thread, which means that fsck went to sleep for some + reason and never woke up. + + + Let's guess that the last process in the process list is fsck: + + + + (gdb) p current_task.prev_task.comm + $13 = "fsck.ext2\000\000\000\000\000\000" + + + + + + It is, so let's see what it thinks it's up to: + + + + (gdb) p current_task.prev_task.thread + $14 = {extern_pid = 1980, tracing = 0, want_tracing = 0, forking = 0, + kernel_stack_page = 0, signal_stack = 1342627840, syscall = {id = 4, args = { + 3, 134973440, 1024, 0, 1024}, have_result = 0, result = 50590720}, + request = {op = 2, u = {exec = {ip = 1350467584, sp = 2952789424}, fork = { + regs = {1350467584, 2952789424, 0 <repeats 15 times>}, sigstack = 0, + pid = 0}, switch_to = 0x507e8000, thread = {proc = 0x507e8000, + arg = 0xaffffdb0, flags = 0, new_pid = 0}, input_request = { + op = 1350467584, fd = -1342177872, proc = 0, pid = 0}}}} + + + + + + The interesting things here are the fact that its .thread.syscall.id + is __NR_write (see the big switch in arch/um/kernel/syscall_kern.c or + the defines in include/asm-um/arch/unistd.h), and that it never + returned. Also, its .request.op is OP_SWITCH (see + arch/um/include/user_util.h). These mean that it went into a write, + and, for some reason, called schedule(). + + + The fact that it never returned from write means that its stack should + be fairly interesting. Its pid is 1980 (.thread.extern_pid). That + process is being ptraced by the signal thread, so it must be detached + before gdb can attach it: + + + + + + + + + + + (gdb) call detach(1980) + + Program received signal SIGSEGV, Segmentation fault. + <function called from gdb> + The program being debugged stopped while in a function called from GDB. + When the function (detach) is done executing, GDB will silently + stop (instead of continuing to evaluate the expression containing + the function call). + (gdb) call detach(1980) + $15 = 0 + + + + + + The first detach segfaults for some reason, and the second one + succeeds. + + + Now I detach from the signal thread, attach to the fsck thread, and + look at its stack: + + + (gdb) det + Detaching from program: /home/dike/linux/2.3.26/um/linux Pid 1935 + (gdb) att 1980 + Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1980 + 0x10070451 in __kill () + (gdb) bt + #0 0x10070451 in __kill () + #1 0x10068ccd in usr1_pid (pid=1980) at process.c:30 + #2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000) + at process_kern.c:156 + #3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000) + at process_kern.c:161 + #4 0x10001d12 in schedule () at sched.c:777 + #5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71 + #6 0x1006aa10 in __down_failed () at semaphore.c:157 + #7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174 + #8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182 + #9 <signal handler called> + #10 0x10155404 in errno () + #11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50 + #12 0x1006c5d8 in segv_handler (sc=0x5006eaf8) at trap_user.c:174 + #13 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182 + #14 <signal handler called> + #15 0xc0fd in ?? () + #16 0x10016647 in sys_write (fd=3, + buf=0x80b8800 <Address 0x80b8800 out of bounds>, count=1024) + at read_write.c:159 + #17 0x1006d5b3 in execute_syscall (syscall=4, args=0x5006ef08) + at syscall_kern.c:254 + #18 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35 + #19 <signal handler called> + #20 0x400dc8b0 in ?? () + + + + + + The interesting things here are : + + +o There are two segfaults on this stack (frames 9 and 14) + + +o The first faulting address (frame 11) is 0x50000800 + + (gdb) p (void *)1342179328 + $16 = (void *) 0x50000800 + + + + + + The initial faulting address is interesting because it is on the idle + thread's stack. I had been seeing the idle thread segfault for no + apparent reason, and the cause looked like stack corruption. In hopes + of catching the culprit in the act, I had turned off all protections + to that stack while the idle thread wasn't running. This apparently + tripped that trap. + + + However, the more immediate problem is that second segfault and I'm + going to concentrate on that. First, I want to see where the fault + happened, so I have to go look at the sigcontent struct in frame 8: + + + + (gdb) up + #1 0x10068ccd in usr1_pid (pid=1980) at process.c:30 + 30 kill(pid, SIGUSR1); + (gdb) + #2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000) + at process_kern.c:156 + 156 usr1_pid(getpid()); + (gdb) + #3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000) + at process_kern.c:161 + 161 _switch_to(prev, next); + (gdb) + #4 0x10001d12 in schedule () at sched.c:777 + 777 switch_to(prev, next, prev); + (gdb) + #5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71 + 71 schedule(); + (gdb) + #6 0x1006aa10 in __down_failed () at semaphore.c:157 + 157 } + (gdb) + #7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174 + 174 segv(sc->cr2, sc->err & 2); + (gdb) + #8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182 + 182 segv_handler(sc); + (gdb) p *sc + Cannot access memory at address 0x0. + + + + + That's not very useful, so I'll try a more manual method: + + + (gdb) p *((struct sigcontext *) (&sig + 1)) + $19 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43, + __dsh = 0, edi = 1342179328, esi = 1350378548, ebp = 1342630440, + esp = 1342630420, ebx = 1348150624, edx = 1280, ecx = 0, eax = 0, + trapno = 14, err = 4, eip = 268480945, cs = 35, __csh = 0, eflags = 66118, + esp_at_signal = 1342630420, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0, + cr2 = 1280} + + + + The ip is in handle_mm_fault: + + + (gdb) p (void *)268480945 + $20 = (void *) 0x1000b1b1 + (gdb) i sym $20 + handle_mm_fault + 57 in section .text + + + + + + Specifically, it's in pte_alloc: + + + (gdb) i line *$20 + Line 124 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" + starts at address 0x1000b1b1 <handle_mm_fault+57> + and ends at 0x1000b1b7 <handle_mm_fault+63>. + + + + + + To find where in handle_mm_fault this is, I'll jump forward in the + code until I see an address in that procedure: + + + + (gdb) i line *0x1000b1c0 + Line 126 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" + starts at address 0x1000b1b7 <handle_mm_fault+63> + and ends at 0x1000b1c3 <handle_mm_fault+75>. + (gdb) i line *0x1000b1d0 + Line 131 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" + starts at address 0x1000b1d0 <handle_mm_fault+88> + and ends at 0x1000b1da <handle_mm_fault+98>. + (gdb) i line *0x1000b1e0 + Line 61 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" + starts at address 0x1000b1da <handle_mm_fault+98> + and ends at 0x1000b1e1 <handle_mm_fault+105>. + (gdb) i line *0x1000b1f0 + Line 134 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" + starts at address 0x1000b1f0 <handle_mm_fault+120> + and ends at 0x1000b200 <handle_mm_fault+136>. + (gdb) i line *0x1000b200 + Line 135 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" + starts at address 0x1000b200 <handle_mm_fault+136> + and ends at 0x1000b208 <handle_mm_fault+144>. + (gdb) i line *0x1000b210 + Line 139 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h" + starts at address 0x1000b210 <handle_mm_fault+152> + and ends at 0x1000b219 <handle_mm_fault+161>. + (gdb) i line *0x1000b220 + Line 1168 of "memory.c" starts at address 0x1000b21e <handle_mm_fault+166> + and ends at 0x1000b222 <handle_mm_fault+170>. + + + + + + Something is apparently wrong with the page tables or vma_structs, so + lets go back to frame 11 and have a look at them: + + + + #11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50 + 50 handle_mm_fault(current, vma, address, is_write); + (gdb) call pgd_offset_proc(vma->vm_mm, address) + $22 = (pgd_t *) 0x80a548c + + + + + + That's pretty bogus. Page tables aren't supposed to be in process + text or data areas. Let's see what's in the vma: + + + (gdb) p *vma + $23 = {vm_mm = 0x507d2434, vm_start = 0, vm_end = 134512640, + vm_next = 0x80a4f8c, vm_page_prot = {pgprot = 0}, vm_flags = 31200, + vm_avl_height = 2058, vm_avl_left = 0x80a8c94, vm_avl_right = 0x80d1000, + vm_next_share = 0xaffffdb0, vm_pprev_share = 0xaffffe63, + vm_ops = 0xaffffe7a, vm_pgoff = 2952789626, vm_file = 0xafffffec, + vm_private_data = 0x62} + (gdb) p *vma.vm_mm + $24 = {mmap = 0x507d2434, mmap_avl = 0x0, mmap_cache = 0x8048000, + pgd = 0x80a4f8c, mm_users = {counter = 0}, mm_count = {counter = 134904288}, + map_count = 134909076, mmap_sem = {count = {counter = 135073792}, + sleepers = -1342177872, wait = {lock = <optimized out or zero length>, + task_list = {next = 0xaffffe63, prev = 0xaffffe7a}, + __magic = -1342177670, __creator = -1342177300}, __magic = 98}, + page_table_lock = {}, context = 138, start_code = 0, end_code = 0, + start_data = 0, end_data = 0, start_brk = 0, brk = 0, start_stack = 0, + arg_start = 0, arg_end = 0, env_start = 0, env_end = 0, rss = 1350381536, + total_vm = 0, locked_vm = 0, def_flags = 0, cpu_vm_mask = 0, swap_cnt = 0, + swap_address = 0, segments = 0x0} + + + + + + This also pretty bogus. With all of the 0x80xxxxx and 0xaffffxxx + addresses, this is looking like a stack was plonked down on top of + these structures. Maybe it's a stack overflow from the next page: + + + + (gdb) p vma + $25 = (struct vm_area_struct *) 0x507d2434 + + + + + + That's towards the lower quarter of the page, so that would have to + have been pretty heavy stack overflow: + + + + + + + + + + + + + + + (gdb) x/100x $25 + 0x507d2434: 0x507d2434 0x00000000 0x08048000 0x080a4f8c + 0x507d2444: 0x00000000 0x080a79e0 0x080a8c94 0x080d1000 + 0x507d2454: 0xaffffdb0 0xaffffe63 0xaffffe7a 0xaffffe7a + 0x507d2464: 0xafffffec 0x00000062 0x0000008a 0x00000000 + 0x507d2474: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2484: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2494: 0x00000000 0x00000000 0x507d2fe0 0x00000000 + 0x507d24a4: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d24b4: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d24c4: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d24d4: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d24e4: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d24f4: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2504: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2514: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2524: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2534: 0x00000000 0x00000000 0x507d25dc 0x00000000 + 0x507d2544: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2554: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2564: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2574: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2584: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d2594: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d25a4: 0x00000000 0x00000000 0x00000000 0x00000000 + 0x507d25b4: 0x00000000 0x00000000 0x00000000 0x00000000 + + + + + + It's not stack overflow. The only "stack-like" piece of this data is + the vma_struct itself. + + + At this point, I don't see any avenues to pursue, so I just have to + admit that I have no idea what's going on. What I will do, though, is + stick a trap on the segfault handler which will stop if it sees any + writes to the idle thread's stack. That was the thing that happened + first, and it may be that if I can catch it immediately, what's going + on will be somewhat clearer. + + + 1122..22.. EEppiissooddee 22:: TThhee ccaassee ooff tthhee hhuunngg ffsscckk + + After setting a trap in the SEGV handler for accesses to the signal + thread's stack, I reran the kernel. + + + fsck hung again, this time by hitting the trap: + + + + + + + + + + + + + + + + + Setting hostname uml [ OK ] + Checking root filesystem + /dev/fhd0 contains a file system with errors, check forced. + Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. + + /dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. + (i.e., without -a or -p options) + [ FAILED ] + + *** An error occurred during the file system check. + *** Dropping you to a shell; the system will reboot + *** when you leave the shell. + Give root password for maintenance + (or type Control-D for normal startup): + + [root@uml /root]# fsck -y /dev/fhd0 + fsck -y /dev/fhd0 + Parallelizing fsck version 1.14 (9-Jan-1999) + e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 + /dev/fhd0 contains a file system with errors, check forced. + Pass 1: Checking inodes, blocks, and sizes + Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes + + Pass 2: Checking directory structure + Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes + + Directory inode 11858, block 0, offset 0: directory corrupted + Salvage? yes + + Missing '.' in directory inode 11858. + Fix? yes + + Missing '..' in directory inode 11858. + Fix? yes + + Untested (4127) [100fe44c]: trap_kern.c line 31 + + + + + + I need to get the signal thread to detach from pid 4127 so that I can + attach to it with gdb. This is done by sending it a SIGUSR1, which is + caught by the signal thread, which detaches the process: + + + kill -USR1 4127 + + + + + + Now I can run gdb on it: + + + + + + + + + + + + + + ~/linux/2.3.26/um 1034: gdb linux + GNU gdb 4.17.0.11 with Linux support + Copyright 1998 Free Software Foundation, Inc. + GDB is free software, covered by the GNU General Public License, and you are + welcome to change it and/or distribute copies of it under certain conditions. + Type "show copying" to see the conditions. + There is absolutely no warranty for GDB. Type "show warranty" for details. + This GDB was configured as "i386-redhat-linux"... + (gdb) att 4127 + Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 4127 + 0x10075891 in __libc_nanosleep () + + + + + + The backtrace shows that it was in a write and that the fault address + (address in frame 3) is 0x50000800, which is right in the middle of + the signal thread's stack page: + + + (gdb) bt + #0 0x10075891 in __libc_nanosleep () + #1 0x1007584d in __sleep (seconds=1000000) + at ../sysdeps/unix/sysv/linux/sleep.c:78 + #2 0x1006ce9a in stop () at user_util.c:191 + #3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31 + #4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174 + #5 0x1006c63c in kern_segv_handler (sig=11) at trap_user.c:182 + #6 <signal handler called> + #7 0xc0fd in ?? () + #8 0x10016647 in sys_write (fd=3, buf=0x80b8800 "R.", count=1024) + at read_write.c:159 + #9 0x1006d603 in execute_syscall (syscall=4, args=0x5006ef08) + at syscall_kern.c:254 + #10 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35 + #11 <signal handler called> + #12 0x400dc8b0 in ?? () + #13 <signal handler called> + #14 0x400dc8b0 in ?? () + #15 0x80545fd in ?? () + #16 0x804daae in ?? () + #17 0x8054334 in ?? () + #18 0x804d23e in ?? () + #19 0x8049632 in ?? () + #20 0x80491d2 in ?? () + #21 0x80596b5 in ?? () + (gdb) p (void *)1342179328 + $3 = (void *) 0x50000800 + + + + + + Going up the stack to the segv_handler frame and looking at where in + the code the access happened shows that it happened near line 110 of + block_dev.c: + + + + + + + + + + (gdb) up + #1 0x1007584d in __sleep (seconds=1000000) + at ../sysdeps/unix/sysv/linux/sleep.c:78 + ../sysdeps/unix/sysv/linux/sleep.c:78: No such file or directory. + (gdb) + #2 0x1006ce9a in stop () at user_util.c:191 + 191 while(1) sleep(1000000); + (gdb) + #3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31 + 31 KERN_UNTESTED(); + (gdb) + #4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174 + 174 segv(sc->cr2, sc->err & 2); + (gdb) p *sc + $1 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43, + __dsh = 0, edi = 1342179328, esi = 134973440, ebp = 1342631484, + esp = 1342630864, ebx = 256, edx = 0, ecx = 256, eax = 1024, trapno = 14, + err = 6, eip = 268550834, cs = 35, __csh = 0, eflags = 66070, + esp_at_signal = 1342630864, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0, + cr2 = 1342179328} + (gdb) p (void *)268550834 + $2 = (void *) 0x1001c2b2 + (gdb) i sym $2 + block_write + 1090 in section .text + (gdb) i line *$2 + Line 209 of "/home/dike/linux/2.3.26/um/include/asm/arch/string.h" + starts at address 0x1001c2a1 <block_write+1073> + and ends at 0x1001c2bf <block_write+1103>. + (gdb) i line *0x1001c2c0 + Line 110 of "block_dev.c" starts at address 0x1001c2bf <block_write+1103> + and ends at 0x1001c2e3 <block_write+1139>. + + + + + + Looking at the source shows that the fault happened during a call to + copy_to_user to copy the data into the kernel: + + + 107 count -= chars; + 108 copy_from_user(p,buf,chars); + 109 p += chars; + 110 buf += chars; + + + + + + p is the pointer which must contain 0x50000800, since buf contains + 0x80b8800 (frame 8 above). It is defined as: + + + p = offset + bh->b_data; + + + + + + I need to figure out what bh is, and it just so happens that bh is + passed as an argument to mark_buffer_uptodate and mark_buffer_dirty a + few lines later, so I do a little disassembly: + + + + + (gdb) disas 0x1001c2bf 0x1001c2e0 + Dump of assembler code from 0x1001c2bf to 0x1001c2d0: + 0x1001c2bf <block_write+1103>: addl %eax,0xc(%ebp) + 0x1001c2c2 <block_write+1106>: movl 0xfffffdd4(%ebp),%edx + 0x1001c2c8 <block_write+1112>: btsl $0x0,0x18(%edx) + 0x1001c2cd <block_write+1117>: btsl $0x1,0x18(%edx) + 0x1001c2d2 <block_write+1122>: sbbl %ecx,%ecx + 0x1001c2d4 <block_write+1124>: testl %ecx,%ecx + 0x1001c2d6 <block_write+1126>: jne 0x1001c2e3 <block_write+1139> + 0x1001c2d8 <block_write+1128>: pushl $0x0 + 0x1001c2da <block_write+1130>: pushl %edx + 0x1001c2db <block_write+1131>: call 0x1001819c <__mark_buffer_dirty> + End of assembler dump. + + + + + + At that point, bh is in %edx (address 0x1001c2da), which is calculated + at 0x1001c2c2 as %ebp + 0xfffffdd4, so I figure exactly what that is, + taking %ebp from the sigcontext_struct above: + + + (gdb) p (void *)1342631484 + $5 = (void *) 0x5006ee3c + (gdb) p 0x5006ee3c+0xfffffdd4 + $6 = 1342630928 + (gdb) p (void *)$6 + $7 = (void *) 0x5006ec10 + (gdb) p *((void **)$7) + $8 = (void *) 0x50100200 + + + + + + Now, I look at the structure to see what's in it, and particularly, + what its b_data field contains: + + + (gdb) p *((struct buffer_head *)0x50100200) + $13 = {b_next = 0x50289380, b_blocknr = 49405, b_size = 1024, b_list = 0, + b_dev = 15872, b_count = {counter = 1}, b_rdev = 15872, b_state = 24, + b_flushtime = 0, b_next_free = 0x501001a0, b_prev_free = 0x50100260, + b_this_page = 0x501001a0, b_reqnext = 0x0, b_pprev = 0x507fcf58, + b_data = 0x50000800 "", b_page = 0x50004000, + b_end_io = 0x10017f60 <end_buffer_io_sync>, b_dev_id = 0x0, + b_rsector = 98810, b_wait = {lock = <optimized out or zero length>, + task_list = {next = 0x50100248, prev = 0x50100248}, __magic = 1343226448, + __creator = 0}, b_kiobuf = 0x0} + + + + + + The b_data field is indeed 0x50000800, so the question becomes how + that happened. The rest of the structure looks fine, so this probably + is not a case of data corruption. It happened on purpose somehow. + + + The b_page field is a pointer to the page_struct representing the + 0x50000000 page. Looking at it shows the kernel's idea of the state + of that page: + + + + (gdb) p *$13.b_page + $17 = {list = {next = 0x50004a5c, prev = 0x100c5174}, mapping = 0x0, + index = 0, next_hash = 0x0, count = {counter = 1}, flags = 132, lru = { + next = 0x50008460, prev = 0x50019350}, wait = { + lock = <optimized out or zero length>, task_list = {next = 0x50004024, + prev = 0x50004024}, __magic = 1342193708, __creator = 0}, + pprev_hash = 0x0, buffers = 0x501002c0, virtual = 1342177280, + zone = 0x100c5160} + + + + + + Some sanity-checking: the virtual field shows the "virtual" address of + this page, which in this kernel is the same as its "physical" address, + and the page_struct itself should be mem_map[0], since it represents + the first page of memory: + + + + (gdb) p (void *)1342177280 + $18 = (void *) 0x50000000 + (gdb) p mem_map + $19 = (mem_map_t *) 0x50004000 + + + + + + These check out fine. + + + Now to check out the page_struct itself. In particular, the flags + field shows whether the page is considered free or not: + + + (gdb) p (void *)132 + $21 = (void *) 0x84 + + + + + + The "reserved" bit is the high bit, which is definitely not set, so + the kernel considers the signal stack page to be free and available to + be used. + + + At this point, I jump to conclusions and start looking at my early + boot code, because that's where that page is supposed to be reserved. + + + In my setup_arch procedure, I have the following code which looks just + fine: + + + + bootmap_size = init_bootmem(start_pfn, end_pfn - start_pfn); + free_bootmem(__pa(low_physmem) + bootmap_size, high_physmem - low_physmem); + + + + + + Two stack pages have already been allocated, and low_physmem points to + the third page, which is the beginning of free memory. + The init_bootmem call declares the entire memory to the boot memory + manager, which marks it all reserved. The free_bootmem call frees up + all of it, except for the first two pages. This looks correct to me. + + + So, I decide to see init_bootmem run and make sure that it is marking + those first two pages as reserved. I never get that far. + + + Stepping into init_bootmem, and looking at bootmem_map before looking + at what it contains shows the following: + + + + (gdb) p bootmem_map + $3 = (void *) 0x50000000 + + + + + + Aha! The light dawns. That first page is doing double duty as a + stack and as the boot memory map. The last thing that the boot memory + manager does is to free the pages used by its memory map, so this page + is getting freed even its marked as reserved. + + + The fix was to initialize the boot memory manager before allocating + those two stack pages, and then allocate them through the boot memory + manager. After doing this, and fixing a couple of subsequent buglets, + the stack corruption problem disappeared. + + + + + + 1133.. WWhhaatt ttoo ddoo wwhheenn UUMMLL ddooeessnn''tt wwoorrkk + + + + + 1133..11.. SSttrraannggee ccoommppiillaattiioonn eerrrroorrss wwhheenn yyoouu bbuuiilldd ffrroomm ssoouurrccee + + As of test11, it is necessary to have "ARCH=um" in the environment or + on the make command line for all steps in building UML, including + clean, distclean, or mrproper, config, menuconfig, or xconfig, dep, + and linux. If you forget for any of them, the i386 build seems to + contaminate the UML build. If this happens, start from scratch with + + + host% + make mrproper ARCH=um + + + + + and repeat the build process with ARCH=um on all the steps. + + + See ``Compiling the kernel and modules'' for more details. + + + Another cause of strange compilation errors is building UML in + /usr/src/linux. If you do this, the first thing you need to do is + clean up the mess you made. The /usr/src/linux/asm link will now + point to /usr/src/linux/asm-um. Make it point back to + /usr/src/linux/asm-i386. Then, move your UML pool someplace else and + build it there. Also see below, where a more specific set of symptoms + is described. + + + + 1133..22.. UUMMLL hhaannggss oonn bboooott aafftteerr mmoouunnttiinngg ddeevvffss + + The boot looks like this: + + + VFS: Mounted root (ext2 filesystem) readonly. + Mounted devfs on /dev + + + + + You're probably running a recent distribution on an old machine. I + saw this with the RH7.1 filesystem running on a Pentium. The shared + library loader, ld.so, was executing an instruction (cmove) which the + Pentium didn't support. That instruction was apparently added later. + If you run UML under the debugger, you'll see the hang caused by one + instruction causing an infinite SIGILL stream. + + + The fix is to boot UML on an older filesystem. + + + + 1133..33.. AA vvaarriieettyy ooff ppaanniiccss aanndd hhaannggss wwiitthh //ttmmpp oonn aa rreeiisseerrffss ffiilleessyyss-- + tteemm + + I saw this on reiserfs 3.5.21 and it seems to be fixed in 3.5.27. + Panics preceded by + + + Detaching pid nnnn + + + + are diagnostic of this problem. This is a reiserfs bug which causes a + thread to occasionally read stale data from a mmapped page shared with + another thread. The fix is to upgrade the filesystem or to have /tmp + be an ext2 filesystem. + + + + 1133..44.. TThhee ccoommppiillee ffaaiillss wwiitthh eerrrroorrss aabboouutt ccoonnfflliiccttiinngg ttyyppeess ffoorr + ''ooppeenn'',, ''dduupp'',, aanndd ''wwaaiittppiidd'' + + This happens when you build in /usr/src/linux. The UML build makes + the include/asm link point to include/asm-um. /usr/include/asm points + to /usr/src/linux/include/asm, so when that link gets moved, files + which need to include the asm-i386 versions of headers get the + incompatible asm-um versions. The fix is to move the include/asm link + back to include/asm-i386 and to do UML builds someplace else. + + + + 1133..55.. UUMMLL ddooeessnn''tt wwoorrkk wwhheenn //ttmmpp iiss aann NNFFSS ffiilleessyysstteemm + + This seems to be a similar situation with the resierfs problem above. + Some versions of NFS seems not to handle mmap correctly, which UML + depends on. The workaround is have /tmp be non-NFS directory. + + + 1133..66.. UUMMLL hhaannggss oonn bboooott wwhheenn ccoommppiilleedd wwiitthh ggpprrooff ssuuppppoorrtt + + If you build UML with gprof support and, early in the boot, it does + this + + + kernel BUG at page_alloc.c:100! + + + + + you have a buggy gcc. You can work around the problem by removing + UM_FASTCALL from CFLAGS in arch/um/Makefile-i386. This will open up + another bug, but that one is fairly hard to reproduce. + + + + 1133..77.. ssyyssllooggdd ddiieess wwiitthh aa SSIIGGTTEERRMM oonn ssttaarrttuupp + + The exact boot error depends on the distribution that you're booting, + but Debian produces this: + + + /etc/rc2.d/S10sysklogd: line 49: 93 Terminated + start-stop-daemon --start --quiet --exec /sbin/syslogd -- $SYSLOGD + + + + + This is a syslogd bug. There's a race between a parent process + installing a signal handler and its child sending the signal. See + this uml-devel post <http://www.geocrawler.com/lists/3/Source- + Forge/709/0/6612801> for the details. + + + + 1133..88.. TTUUNN//TTAAPP nneettwwoorrkkiinngg ddooeessnn''tt wwoorrkk oonn aa 22..44 hhoosstt + + There are a couple of problems which were + <http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="pointed + out"> by Tim Robinson <timro at trkr dot net> + + +o It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier. + The fix is to upgrade to something more recent and then read the + next item. + + +o If you see + + + File descriptor in bad state + + + + when you bring up the device inside UML, you have a header mismatch + between the original kernel and the upgraded one. Make /usr/src/linux + point at the new headers. This will only be a problem if you build + uml_net yourself. + + + + 1133..99.. YYoouu ccaann nneettwwoorrkk ttoo tthhee hhoosstt bbuutt nnoott ttoo ootthheerr mmaacchhiinneess oonn tthhee + nneett + + If you can connect to the host, and the host can connect to UML, but + you can not connect to any other machines, then you may need to enable + IP Masquerading on the host. Usually this is only experienced when + using private IP addresses (192.168.x.x or 10.x.x.x) for host/UML + networking, rather than the public address space that your host is + connected to. UML does not enable IP Masquerading, so you will need + to create a static rule to enable it: + + + host% + iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE + + + + + Replace eth0 with the interface that you use to talk to the rest of + the world. + + + Documentation on IP Masquerading, and SNAT, can be found at + www.netfilter.org <http://www.netfilter.org> . + + + If you can reach the local net, but not the outside Internet, then + that is usually a routing problem. The UML needs a default route: + + + UML# + route add default gw gateway IP + + + + + The gateway IP can be any machine on the local net that knows how to + reach the outside world. Usually, this is the host or the local net- + work's gateway. + + + Occasionally, we hear from someone who can reach some machines, but + not others on the same net, or who can reach some ports on other + machines, but not others. These are usually caused by strange + firewalling somewhere between the UML and the other box. You track + this down by running tcpdump on every interface the packets travel + over and see where they disappear. When you find a machine that takes + the packets in, but does not send them onward, that's the culprit. + + + + 1133..1100.. II hhaavvee nnoo rroooott aanndd II wwaanntt ttoo ssccrreeaamm + + Thanks to Birgit Wahlich for telling me about this strange one. It + turns out that there's a limit of six environment variables on the + kernel command line. When that limit is reached or exceeded, argument + processing stops, which means that the 'root=' argument that UML + usually adds is not seen. So, the filesystem has no idea what the + root device is, so it panics. + + + The fix is to put less stuff on the command line. Glomming all your + setup variables into one is probably the best way to go. + + + + 1133..1111.. UUMMLL bbuuiilldd ccoonnfflliicctt bbeettwweeeenn ppttrraaccee..hh aanndd uuccoonntteexxtt..hh + + On some older systems, /usr/include/asm/ptrace.h and + /usr/include/sys/ucontext.h define the same names. So, when they're + included together, the defines from one completely mess up the parsing + of the other, producing errors like: + /usr/include/sys/ucontext.h:47: parse error before + `10' + + + + + plus a pile of warnings. + + + This is a libc botch, which has since been fixed, and I don't see any + way around it besides upgrading. + + + + 1133..1122.. TThhee UUMMLL BBooggooMMiippss iiss eexxaaccttllyy hhaallff tthhee hhoosstt''ss BBooggooMMiippss + + On i386 kernels, there are two ways of running the loop that is used + to calculate the BogoMips rating, using the TSC if it's there or using + a one-instruction loop. The TSC produces twice the BogoMips as the + loop. UML uses the loop, since it has nothing resembling a TSC, and + will get almost exactly the same BogoMips as a host using the loop. + However, on a host with a TSC, its BogoMips will be double the loop + BogoMips, and therefore double the UML BogoMips. + + + + 1133..1133.. WWhheenn yyoouu rruunn UUMMLL,, iitt iimmmmeeddiiaatteellyy sseeggffaauullttss + + If the host is configured with the 2G/2G address space split, that's + why. See ``UML on 2G/2G hosts'' for the details on getting UML to + run on your host. + + + + 1133..1144.. xxtteerrmmss aappppeeaarr,, tthheenn iimmmmeeddiiaatteellyy ddiissaappppeeaarr + + If you're running an up to date kernel with an old release of + uml_utilities, the port-helper program will not work properly, so + xterms will exit straight after they appear. The solution is to + upgrade to the latest release of uml_utilities. Usually this problem + occurs when you have installed a packaged release of UML then compiled + your own development kernel without upgrading the uml_utilities from + the source distribution. + + + + 1133..1155.. AAnnyy ootthheerr ppaanniicc,, hhaanngg,, oorr ssttrraannggee bbeehhaavviioorr + + If you're seeing truly strange behavior, such as hangs or panics that + happen in random places, or you try running the debugger to see what's + happening and it acts strangely, then it could be a problem in the + host kernel. If you're not running a stock Linus or -ac kernel, then + try that. An early version of the preemption patch and a 2.4.10 SuSE + kernel have caused very strange problems in UML. + + + Otherwise, let me know about it. Send a message to one of the UML + mailing lists - either the developer list - user-mode-linux-devel at + lists dot sourceforge dot net (subscription info) or the user list - + user-mode-linux-user at lists dot sourceforge do net (subscription + info), whichever you prefer. Don't assume that everyone knows about + it and that a fix is imminent. + + + If you want to be super-helpful, read ``Diagnosing Problems'' and + follow the instructions contained therein. + 1144.. DDiiaaggnnoossiinngg PPrroobblleemmss + + + If you get UML to crash, hang, or otherwise misbehave, you should + report this on one of the project mailing lists, either the developer + list - user-mode-linux-devel at lists dot sourceforge dot net + (subscription info) or the user list - user-mode-linux-user at lists + dot sourceforge dot net (subscription info). When you do, it is + likely that I will want more information. So, it would be helpful to + read the stuff below, do whatever is applicable in your case, and + report the results to the list. + + + For any diagnosis, you're going to need to build a debugging kernel. + The binaries from this site aren't debuggable. If you haven't done + this before, read about ``Compiling the kernel and modules'' and + ``Kernel debugging'' UML first. + + + 1144..11.. CCaassee 11 :: NNoorrmmaall kkeerrnneell ppaanniiccss + + The most common case is for a normal thread to panic. To debug this, + you will need to run it under the debugger (add 'debug' to the command + line). An xterm will start up with gdb running inside it. Continue + it when it stops in start_kernel and make it crash. Now ^C gdb and + + + If the panic was a "Kernel mode fault", then there will be a segv + frame on the stack and I'm going to want some more information. The + stack might look something like this: + + + (UML gdb) backtrace + #0 0x1009bf76 in __sigprocmask (how=1, set=0x5f347940, oset=0x0) + at ../sysdeps/unix/sysv/linux/sigprocmask.c:49 + #1 0x10091411 in change_sig (signal=10, on=1) at process.c:218 + #2 0x10094785 in timer_handler (sig=26) at time_kern.c:32 + #3 0x1009bf38 in __restore () + at ../sysdeps/unix/sysv/linux/i386/sigaction.c:125 + #4 0x1009534c in segv (address=8, ip=268849158, is_write=2, is_user=0) + at trap_kern.c:66 + #5 0x10095c04 in segv_handler (sig=11) at trap_user.c:285 + #6 0x1009bf38 in __restore () + + + + + I'm going to want to see the symbol and line information for the value + of ip in the segv frame. In this case, you would do the following: + + + (UML gdb) i sym 268849158 + + + + + and + + + (UML gdb) i line *268849158 + + + + + The reason for this is the __restore frame right above the segv_han- + dler frame is hiding the frame that actually segfaulted. So, I have + to get that information from the faulting ip. + + + 1144..22.. CCaassee 22 :: TTrraacciinngg tthhrreeaadd ppaanniiccss + + The less common and more painful case is when the tracing thread + panics. In this case, the kernel debugger will be useless because it + needs a healthy tracing thread in order to work. The first thing to + do is get a backtrace from the tracing thread. This is done by + figuring out what its pid is, firing up gdb, and attaching it to that + pid. You can figure out the tracing thread pid by looking at the + first line of the console output, which will look like this: + + + tracing thread pid = 15851 + + + + + or by running ps on the host and finding the line that looks like + this: + + + jdike 15851 4.5 0.4 132568 1104 pts/0 S 21:34 0:05 ./linux [(tracing thread)] + + + + + If the panic was 'segfault in signals', then follow the instructions + above for collecting information about the location of the seg fault. + + + If the tracing thread flaked out all by itself, then send that + backtrace in and wait for our crack debugging team to fix the problem. + + + 1144..33.. CCaassee 33 :: TTrraacciinngg tthhrreeaadd ppaanniiccss ccaauusseedd bbyy ootthheerr tthhrreeaaddss + + However, there are cases where the misbehavior of another thread + caused the problem. The most common panic of this type is: + + + wait_for_stop failed to wait for <pid> to stop with <signal number> + + + + + In this case, you'll need to get a backtrace from the process men- + tioned in the panic, which is complicated by the fact that the kernel + debugger is defunct and without some fancy footwork, another gdb can't + attach to it. So, this is how the fancy footwork goes: + + In a shell: + + + host% kill -STOP pid + + + + + Run gdb on the tracing thread as described in case 2 and do: + + + (host gdb) call detach(pid) + + + If you get a segfault, do it again. It always works the second time. + + Detach from the tracing thread and attach to that other thread: + + + (host gdb) detach + + + + + + + (host gdb) attach pid + + + + + If gdb hangs when attaching to that process, go back to a shell and + do: + + + host% + kill -CONT pid + + + + + And then get the backtrace: + + + (host gdb) backtrace + + + + + + 1144..44.. CCaassee 44 :: HHaannggss + + Hangs seem to be fairly rare, but they sometimes happen. When a hang + happens, we need a backtrace from the offending process. Run the + kernel debugger as described in case 1 and get a backtrace. If the + current process is not the idle thread, then send in the backtrace. + You can tell that it's the idle thread if the stack looks like this: + + + #0 0x100b1401 in __libc_nanosleep () + #1 0x100a2885 in idle_sleep (secs=10) at time.c:122 + #2 0x100a546f in do_idle () at process_kern.c:445 + #3 0x100a5508 in cpu_idle () at process_kern.c:471 + #4 0x100ec18f in start_kernel () at init/main.c:592 + #5 0x100a3e10 in start_kernel_proc (unused=0x0) at um_arch.c:71 + #6 0x100a383f in signal_tramp (arg=0x100a3dd8) at trap_user.c:50 + + + + + If this is the case, then some other process is at fault, and went to + sleep when it shouldn't have. Run ps on the host and figure out which + process should not have gone to sleep and stayed asleep. Then attach + to it with gdb and get a backtrace as described in case 3. + + + + + + + 1155.. TThhaannkkss + + + A number of people have helped this project in various ways, and this + page gives recognition where recognition is due. + + + If you're listed here and you would prefer a real link on your name, + or no link at all, instead of the despammed email address pseudo-link, + let me know. + + + If you're not listed here and you think maybe you should be, please + let me know that as well. I try to get everyone, but sometimes my + bookkeeping lapses and I forget about contributions. + + + 1155..11.. CCooddee aanndd DDooccuummeennttaattiioonn + + Rusty Russell <rusty at linuxcare.com.au> - + + +o wrote the HOWTO <http://user-mode- + linux.sourceforge.net/UserModeLinux-HOWTO.html> + + +o prodded me into making this project official and putting it on + SourceForge + + +o came up with the way cool UML logo <http://user-mode- + linux.sourceforge.net/uml-small.png> + + +o redid the config process + + + Peter Moulder <reiter at netspace.net.au> - Fixed my config and build + processes, and added some useful code to the block driver + + + Bill Stearns <wstearns at pobox.com> - + + +o HOWTO updates + + +o lots of bug reports + + +o lots of testing + + +o dedicated a box (uml.ists.dartmouth.edu) to support UML development + + +o wrote the mkrootfs script, which allows bootable filesystems of + RPM-based distributions to be cranked out + + +o cranked out a large number of filesystems with said script + + + Jim Leu <jleu at mindspring.com> - Wrote the virtual ethernet driver + and associated usermode tools + + Lars Brinkhoff <http://lars.nocrew.org/> - Contributed the ptrace + proxy from his own project <http://a386.nocrew.org/> to allow easier + kernel debugging + + + Andrea Arcangeli <andrea at suse.de> - Redid some of the early boot + code so that it would work on machines with Large File Support + + + Chris Emerson <http://www.chiark.greenend.org.uk/~cemerson/> - Did + the first UML port to Linux/ppc + + + Harald Welte <laforge at gnumonks.org> - Wrote the multicast + transport for the network driver + + + Jorgen Cederlof - Added special file support to hostfs + + + Greg Lonnon <glonnon at ridgerun dot com> - Changed the ubd driver + to allow it to layer a COW file on a shared read-only filesystem and + wrote the iomem emulation support + + + Henrik Nordstrom <http://hem.passagen.se/hno/> - Provided a variety + of patches, fixes, and clues + + + Lennert Buytenhek - Contributed various patches, a rewrite of the + network driver, the first implementation of the mconsole driver, and + did the bulk of the work needed to get SMP working again. + + + Yon Uriarte - Fixed the TUN/TAP network backend while I slept. + + + Adam Heath - Made a bunch of nice cleanups to the initialization code, + plus various other small patches. + + + Matt Zimmerman - Matt volunteered to be the UML Debian maintainer and + is doing a real nice job of it. He also noticed and fixed a number of + actually and potentially exploitable security holes in uml_net. Plus + the occasional patch. I like patches. + + + James McMechan - James seems to have taken over maintenance of the ubd + driver and is doing a nice job of it. + + + Chandan Kudige - wrote the umlgdb script which automates the reloading + of module symbols. + + + Steve Schmidtke - wrote the UML slirp transport and hostaudio drivers, + enabling UML processes to access audio devices on the host. He also + submitted patches for the slip transport and lots of other things. + + + David Coulson <http://davidcoulson.net> - + + +o Set up the usermodelinux.org <http://usermodelinux.org> site, + which is a great way of keeping the UML user community on top of + UML goings-on. + + +o Site documentation and updates + + +o Nifty little UML management daemon UMLd + <http://uml.openconsultancy.com/umld/> + + +o Lots of testing and bug reports + + + + + 1155..22.. FFlluusshhiinngg oouutt bbuuggss + + + + +o Yuri Pudgorodsky + + +o Gerald Britton + + +o Ian Wehrman + + +o Gord Lamb + + +o Eugene Koontz + + +o John H. Hartman + + +o Anders Karlsson + + +o Daniel Phillips + + +o John Fremlin + + +o Rainer Burgstaller + + +o James Stevenson + + +o Matt Clay + + +o Cliff Jefferies + + +o Geoff Hoff + + +o Lennert Buytenhek + + +o Al Viro + + +o Frank Klingenhoefer + + +o Livio Baldini Soares + + +o Jon Burgess + + +o Petru Paler + + +o Paul + + +o Chris Reahard + + +o Sverker Nilsson + + +o Gong Su + + +o johan verrept + + +o Bjorn Eriksson + + +o Lorenzo Allegrucci + + +o Muli Ben-Yehuda + + +o David Mansfield + + +o Howard Goff + + +o Mike Anderson + + +o John Byrne + + +o Sapan J. Batia + + +o Iris Huang + + +o Jan Hudec + + +o Voluspa + + + + + 1155..33.. BBuugglleettss aanndd cclleeaann--uuppss + + + + +o Dave Zarzycki + + +o Adam Lazur + + +o Boria Feigin + + +o Brian J. Murrell + + +o JS + + +o Roman Zippel + + +o Wil Cooley + + +o Ayelet Shemesh + + +o Will Dyson + + +o Sverker Nilsson + + +o dvorak + + +o v.naga srinivas + + +o Shlomi Fish + + +o Roger Binns + + +o johan verrept + + +o MrChuoi + + +o Peter Cleve + + +o Vincent Guffens + + +o Nathan Scott + + +o Patrick Caulfield + + +o jbearce + + +o Catalin Marinas + + +o Shane Spencer + + +o Zou Min + + + +o Ryan Boder + + +o Lorenzo Colitti + + +o Gwendal Grignou + + +o Andre' Breiler + + +o Tsutomu Yasuda + + + + 1155..44.. CCaassee SSttuuddiieess + + + +o Jon Wright + + +o William McEwan + + +o Michael Richardson + + + + 1155..55.. OOtthheerr ccoonnttrriibbuuttiioonnss + + + Bill Carr <Bill.Carr at compaq.com> made the Red Hat mkrootfs script + work with RH 6.2. + + Michael Jennings <mikejen at hevanet.com> sent in some material which + is now gracing the top of the index page <http://user-mode- + linux.sourceforge.net/index.html> of this site. + + SGI <http://www.sgi.com> (and more specifically Ralf Baechle <ralf at + uni-koblenz.de> ) gave me an account on oss.sgi.com + <http://www.oss.sgi.com> . The bandwidth there made it possible to + produce most of the filesystems available on the project download + page. + + Laurent Bonnaud <Laurent.Bonnaud at inpg.fr> took the old grotty + Debian filesystem that I've been distributing and updated it to 2.2. + It is now available by itself here. + + Rik van Riel gave me some ftp space on ftp.nl.linux.org so I can make + releases even when Sourceforge is broken. + + Rodrigo de Castro looked at my broken pte code and told me what was + wrong with it, letting me fix a long-standing (several weeks) and + serious set of bugs. + + Chris Reahard built a specialized root filesystem for running a DNS + server jailed inside UML. It's available from the download + <http://user-mode-linux.sourceforge.net/dl-sf.html> page in the Jail + Filesysems section. + + + + + + + + + + + + |