summaryrefslogtreecommitdiffstats
path: root/Documentation/sound
diff options
context:
space:
mode:
authorTakashi Iwai <tiwai@suse.de>2016-11-10 17:20:32 +0100
committerTakashi Iwai <tiwai@suse.de>2016-11-10 22:33:28 +0100
commitc79b5bb0a36f6290d38d9a4dc126cff5c7f44f2a (patch)
tree2bf1b1b4e087c4521f0463986c403cd59e20d4da /Documentation/sound
parenta02f5895eee72fe365cdcbd26699a5b5091c9f1e (diff)
downloadlinux-c79b5bb0a36f6290d38d9a4dc126cff5c7f44f2a.tar.bz2
ALSA: doc: ReSTize hdspm.txt
A simple conversion from a plain text file. Quite a few reformatting in the end due to the style of the original document. Put to cards directory. Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/cards/hdspm.rst (renamed from Documentation/sound/alsa/hdspm.txt)253
-rw-r--r--Documentation/sound/cards/index.rst1
2 files changed, 136 insertions, 118 deletions
diff --git a/Documentation/sound/alsa/hdspm.txt b/Documentation/sound/cards/hdspm.rst
index 7ba31948dea7..5373e51ed076 100644
--- a/Documentation/sound/alsa/hdspm.txt
+++ b/Documentation/sound/cards/hdspm.rst
@@ -1,21 +1,24 @@
+=======================================
Software Interface ALSA-DSP MADI Driver
+=======================================
(translated from German, so no good English ;-),
-2004 - winfried ritsch
-
+2004 - winfried ritsch
- Full functionality has been added to the driver. Since some of
- the Controls and startup-options are ALSA-Standard and only the
- special Controls are described and discussed below.
+Full functionality has been added to the driver. Since some of
+the Controls and startup-options are ALSA-Standard and only the
+special Controls are described and discussed below.
- hardware functionality:
+Hardware functionality
+======================
- Audio transmission:
+Audio transmission
+------------------
- number of channels -- depends on transmission mode
+* number of channels -- depends on transmission mode
The number of channels chosen is from 1..Nmax. The reason to
use for a lower number of channels is only resource allocation,
@@ -23,31 +26,34 @@ Software Interface ALSA-DSP MADI Driver
allocated. So also the throughput of the PCI system can be
scaled. (Only important for low performance boards).
- Single Speed -- 1..64 channels
+* Single Speed -- 1..64 channels
+.. note::
(Note: Choosing the 56channel mode for transmission or as
receiver, only 56 are transmitted/received over the MADI, but
all 64 channels are available for the mixer, so channel count
for the driver)
- Double Speed -- 1..32 channels
+* Double Speed -- 1..32 channels
+.. note::
Note: Choosing the 56-channel mode for
transmission/receive-mode , only 28 are transmitted/received
over the MADI, but all 32 channels are available for the mixer,
so channel count for the driver
- Quad Speed -- 1..16 channels
+* Quad Speed -- 1..16 channels
- Note: Choosing the 56-channel mode for
+.. note::
+ Choosing the 56-channel mode for
transmission/receive-mode , only 14 are transmitted/received
over the MADI, but all 16 channels are available for the mixer,
so channel count for the driver
- Format -- signed 32 Bit Little Endian (SNDRV_PCM_FMTBIT_S32_LE)
+* Format -- signed 32 Bit Little Endian (SNDRV_PCM_FMTBIT_S32_LE)
- Sample Rates --
+* Sample Rates --
Single Speed -- 32000, 44100, 48000
@@ -55,14 +61,13 @@ Software Interface ALSA-DSP MADI Driver
Quad Speed -- 128000, 176400, 192000 (untested)
- access-mode -- MMAP (memory mapped), Not interleaved
- (PCM_NON-INTERLEAVED)
+* access-mode -- MMAP (memory mapped), Not interleaved (PCM_NON-INTERLEAVED)
- buffer-sizes -- 64,128,256,512,1024,2048,8192 Samples
+* buffer-sizes -- 64,128,256,512,1024,2048,8192 Samples
- fragments -- 2
+* fragments -- 2
- Hardware-pointer -- 2 Modi
+* Hardware-pointer -- 2 Modi
The Card supports the readout of the actual Buffer-pointer,
@@ -74,53 +79,54 @@ Software Interface ALSA-DSP MADI Driver
precise-pointer.
+.. hint::
(Hint: Experimenting I found that the pointer is maximum 64 to
large never to small. So if you subtract 64 you always have a
safe pointer for writing, which is used on this mode inside
ALSA. In theory now you can get now a latency as low as 16
Samples, which is a quarter of the interrupt possibilities.)
- Precise Pointer -- off
+ * Precise Pointer -- off
interrupt used for pointer-calculation
-
- Precise Pointer -- on
+
+ * Precise Pointer -- on
hardware pointer used.
- Controller:
-
+Controller
+----------
- Since DSP-MADI-Mixer has 8152 Fader, it does not make sense to
- use the standard mixer-controls, since this would break most of
- (especially graphic) ALSA-Mixer GUIs. So Mixer control has be
- provided by a 2-dimensional controller using the
- hwdep-interface.
+Since DSP-MADI-Mixer has 8152 Fader, it does not make sense to
+use the standard mixer-controls, since this would break most of
+(especially graphic) ALSA-Mixer GUIs. So Mixer control has be
+provided by a 2-dimensional controller using the
+hwdep-interface.
- Also all 128+256 Peak and RMS-Meter can be accessed via the
- hwdep-interface. Since it could be a performance problem always
- copying and converting Peak and RMS-Levels even if you just need
- one, I decided to export the hardware structure, so that of
- needed some driver-guru can implement a memory-mapping of mixer
- or peak-meters over ioctl, or also to do only copying and no
- conversion. A test-application shows the usage of the controller.
-
- Latency Controls --- not implemented !!!
+Also all 128+256 Peak and RMS-Meter can be accessed via the
+hwdep-interface. Since it could be a performance problem always
+copying and converting Peak and RMS-Levels even if you just need
+one, I decided to export the hardware structure, so that of
+needed some driver-guru can implement a memory-mapping of mixer
+or peak-meters over ioctl, or also to do only copying and no
+conversion. A test-application shows the usage of the controller.
+* Latency Controls --- not implemented !!!
+.. note::
Note: Within the windows-driver the latency is accessible of a
control-panel, but buffer-sizes are controlled with ALSA from
hwparams-calls and should not be changed in run-state, I did not
implement it here.
- System Clock -- suspended !!!!
-
- Name -- "System Clock Mode"
+* System Clock -- suspended !!!!
- Access -- Read Write
-
- Values -- "Master" "Slave"
+ * Name -- "System Clock Mode"
+ * Access -- Read Write
+
+ * Values -- "Master" "Slave"
+.. note::
!!!! This is a hardware-function but is in conflict with the
Clock-source controller, which is a kind of ALSA-standard. I
makes sense to set the card to a special mode (master at some
@@ -128,106 +134,107 @@ Software Interface ALSA-DSP MADI Driver
a studio should have working synchronisations setup. So use
Clock-source-controller instead !!!!
- Clock Source
+* Clock Source
- Name -- "Sample Clock Source"
+ * Name -- "Sample Clock Source"
- Access -- Read Write
+ * Access -- Read Write
- Values -- "AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz",
- "Internal 48.0 kHz", "Internal 64.0 kHz", "Internal 88.2 kHz",
- "Internal 96.0 kHz"
+ * Values -- "AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz",
+ "Internal 48.0 kHz", "Internal 64.0 kHz", "Internal 88.2 kHz",
+ "Internal 96.0 kHz"
Choose between Master at a specific Frequency and so also the
Speed-mode or Slave (Autosync). Also see "Preferred Sync Ref"
-
+.. warning::
!!!! This is no pure hardware function but was implemented by
ALSA by some ALSA-drivers before, so I use it also. !!!
- Preferred Sync Ref
+* Preferred Sync Ref
- Name -- "Preferred Sync Reference"
+ * Name -- "Preferred Sync Reference"
- Access -- Read Write
+ * Access -- Read Write
- Values -- "Word" "MADI"
+ * Values -- "Word" "MADI"
Within the Auto-sync-Mode the preferred Sync Source can be
chosen. If it is not available another is used if possible.
+.. note::
Note: Since MADI has a much higher bit-rate than word-clock, the
card should synchronise better in MADI Mode. But since the
RME-PLL is very good, there are almost no problems with
word-clock too. I never found a difference.
- TX 64 channel ---
+* TX 64 channel
- Name -- "TX 64 channels mode"
+ * Name -- "TX 64 channels mode"
- Access -- Read Write
+ * Access -- Read Write
- Values -- 0 1
+ * Values -- 0 1
Using 64-channel-modus (1) or 56-channel-modus for
MADI-transmission (0).
+.. note::
Note: This control is for output only. Input-mode is detected
automatically from hardware sending MADI.
- Clear TMS ---
+* Clear TMS
- Name -- "Clear Track Marker"
+ * Name -- "Clear Track Marker"
- Access -- Read Write
+ * Access -- Read Write
- Values -- 0 1
+ * Values -- 0 1
Don't use to lower 5 Audio-bits on AES as additional Bits.
- Safe Mode oder Auto Input ---
+* Safe Mode oder Auto Input
- Name -- "Safe Mode"
+ * Name -- "Safe Mode"
- Access -- Read Write
+ * Access -- Read Write
- Values -- 0 1
-
- (default on)
+ * Values -- 0 1 (default on)
If on (1), then if either the optical or coaxial connection
has a failure, there is a takeover to the working one, with no
sample failure. Its only useful if you use the second as a
backup connection.
- Input ---
+* Input
- Name -- "Input Select"
+ * Name -- "Input Select"
- Access -- Read Write
+ * Access -- Read Write
- Values -- optical coaxial
+ * Values -- optical coaxial
Choosing the Input, optical or coaxial. If Safe-mode is active,
this is the preferred Input.
--------------- Mixer ----------------------
+Mixer
+-----
- Mixer
+* Mixer
- Name -- "Mixer"
+ * Name -- "Mixer"
- Access -- Read Write
+ * Access -- Read Write
- Values - <channel-number 0-127> <Value 0-65535>
+ * Values - <channel-number 0-127> <Value 0-65535>
Here as a first value the channel-index is taken to get/set the
@@ -235,40 +242,41 @@ Software Interface ALSA-DSP MADI Driver
fader and 64-127 the playback to outputs fader. Value 0
is channel muted 0 and 32768 an amplification of 1.
- Chn 1-64
+* Chn 1-64
fast mixer for the ALSA-mixer utils. The diagonal of the
mixer-matrix is implemented from playback to output.
- Line Out
+* Line Out
- Name -- "Line Out"
+ * Name -- "Line Out"
- Access -- Read Write
+ * Access -- Read Write
- Values -- 0 1
+ * Values -- 0 1
Switching on and off the analog out, which has nothing to do
with mixing or routing. the analog outs reflects channel 63,64.
---- information (only read access):
+Information (only read access)
+------------------------------
- Sample Rate
+* Sample Rate
- Name -- "System Sample Rate"
+ * Name -- "System Sample Rate"
- Access -- Read-only
+ * Access -- Read-only
getting the sample rate.
- External Rate measured
+* External Rate measured
- Name -- "External Rate"
+ * Name -- "External Rate"
- Access -- Read only
+ * Access -- Read only
Should be "Autosync Rate", but Name used is
@@ -276,79 +284,86 @@ Software Interface ALSA-DSP MADI Driver
reported.
- MADI Sync Status
+* MADI Sync Status
- Name -- "MADI Sync Lock Status"
+ * Name -- "MADI Sync Lock Status"
- Access -- Read
+ * Access -- Read
- Values -- 0,1,2
+ * Values -- 0,1,2
MADI-Input is 0=Unlocked, 1=Locked, or 2=Synced.
- Word Clock Sync Status
+* Word Clock Sync Status
- Name -- "Word Clock Lock Status"
+ * Name -- "Word Clock Lock Status"
- Access -- Read
+ * Access -- Read
- Values -- 0,1,2
+ * Values -- 0,1,2
Word Clock Input is 0=Unlocked, 1=Locked, or 2=Synced.
- AutoSync
+* AutoSync
- Name -- "AutoSync Reference"
+ * Name -- "AutoSync Reference"
- Access -- Read
+ * Access -- Read
- Values -- "WordClock", "MADI", "None"
+ * Values -- "WordClock", "MADI", "None"
Sync-Reference is either "WordClock", "MADI" or none.
- RX 64ch --- noch nicht implementiert
+* RX 64ch --- noch nicht implementiert
MADI-Receiver is in 64 channel mode oder 56 channel mode.
- AB_inp --- not tested
+* AB_inp --- not tested
Used input for Auto-Input.
- actual Buffer Position --- not implemented
+* actual Buffer Position --- not implemented
!!! this is a ALSA internal function, so no control is used !!!
-Calling Parameter:
+Calling Parameter
+=================
+
+* index int array (min = 1, max = 8)
- index int array (min = 1, max = 8),
- "Index value for RME HDSPM interface." card-index within ALSA
+ Index value for RME HDSPM interface. card-index within ALSA
note: ALSA-standard
- id string array (min = 1, max = 8),
- "ID string for RME HDSPM interface."
+* id string array (min = 1, max = 8)
+
+ ID string for RME HDSPM interface.
note: ALSA-standard
- enable int array (min = 1, max = 8),
- "Enable/disable specific HDSPM sound-cards."
+* enable int array (min = 1, max = 8)
+
+ Enable/disable specific HDSPM sound-cards.
note: ALSA-standard
- precise_ptr int array (min = 1, max = 8),
- "Enable precise pointer, or disable."
+* precise_ptr int array (min = 1, max = 8)
+ Enable precise pointer, or disable.
+
+.. note::
note: Use only when the application supports this (which is a special case).
- line_outs_monitor int array (min = 1, max = 8),
- "Send playback streams to analog outs by default."
+* line_outs_monitor int array (min = 1, max = 8)
+ Send playback streams to analog outs by default.
+.. note::
note: each playback channel is mixed to the same numbered output
channel (routed). This is against the ALSA-convention, where all
channels have to be muted on after loading the driver, but was
@@ -356,7 +371,9 @@ Calling Parameter:
- enable_monitor int array (min = 1, max = 8),
- "Enable Analog Out on Channel 63/64 by default."
+* enable_monitor int array (min = 1, max = 8)
+
+ Enable Analog Out on Channel 63/64 by default.
+.. note ::
note: here the analog output is enabled (but not routed).
diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst
index 6c8e4141df9a..b143eff93c87 100644
--- a/Documentation/sound/cards/index.rst
+++ b/Documentation/sound/cards/index.rst
@@ -14,3 +14,4 @@ Card-Specific Information
mixart
bt87x
maya44
+ hdspm