ALSA: doc: ReSTize HD-Audio-DP-MST-audio.txt

A simple conversion from a plain text file.
Put to hd-audio subdirectory.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 0 insertions, 74 deletions

diff --git a/Documentation/sound/alsa/HD-Audio-DP-MST-audio.txt b/Documentation/sound/alsa/HD-Audio-DP-MST-audio.txt
deleted file mode 100644
index 82744ac3513d..000000000000
--- a/Documentation/sound/alsa/HD-Audio-DP-MST-audio.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-To support DP MST audio, HD Audio hdmi codec driver introduces virtual pin
-and dynamic pcm assignment.
-
-Virtual pin is an extension of per_pin. The most difference of DP MST
-from legacy is that DP MST introduces device entry. Each pin can contain
-several device entries. Each device entry behaves as a pin.
-
-As each pin may contain several device entries and each codec may contain
-several pins, if we use one pcm per per_pin, there will be many PCMs.
-The new solution is to create a few PCMs and to dynamically bind pcm to
-per_pin. Driver uses spec->dyn_pcm_assign flag to indicate whether to use
-the new solution.
-
-PCM
-===
-To be added
-
-
-Jack
-====
-
-Presume:
- - MST must be dyn_pcm_assign, and it is acomp (for Intel scenario);
- - NON-MST may or may not be dyn_pcm_assign, it can be acomp or !acomp;
-
-So there are the following scenarios:
- a. MST (&& dyn_pcm_assign && acomp)
- b. NON-MST && dyn_pcm_assign && acomp
- c. NON-MST && !dyn_pcm_assign && !acomp
-
-Below discussion will ignore MST and NON-MST difference as it doesn't
-impact on jack handling too much.
-
-Driver uses struct hdmi_pcm pcm[] array in hdmi_spec and snd_jack is
-a member of hdmi_pcm. Each pin has one struct hdmi_pcm * pcm pointer.
-
-For !dyn_pcm_assign, per_pin->pcm will assigned to spec->pcm[n] statically.
-
-For dyn_pcm_assign, per_pin->pcm will assigned to spec->pcm[n]
-when monitor is hotplugged.
-
-
-Build Jack
-----------
-
-- dyn_pcm_assign
-Will not use hda_jack but use snd_jack in spec->pcm_rec[pcm_idx].jack directly.
-
-- !dyn_pcm_assign
-Use hda_jack and assign spec->pcm_rec[pcm_idx].jack = jack->jack statically.
-
-
-Unsolicited Event Enabling
---------------------------
-Enable unsolicited event if !acomp.
-
-
-Monitor Hotplug Event Handling
-------------------------------
-- acomp
-pin_eld_notify() -> check_presence_and_report() -> hdmi_present_sense() ->
-sync_eld_via_acomp().
-Use directly snd_jack_report() on spec->pcm_rec[pcm_idx].jack for
-both dyn_pcm_assign and !dyn_pcm_assign
-
-- !acomp
-Hdmi_unsol_event() -> hdmi_intrinsic_event() -> check_presence_and_report() ->
-hdmi_present_sense() -> hdmi_prepsent_sense_via_verbs()
-Use directly snd_jack_report() on spec->pcm_rec[pcm_idx].jack for dyn_pcm_assign.
-Use hda_jack mechanism to handle jack events.
-
-
-Others to be added later
-========================