summaryrefslogtreecommitdiffstats
path: root/Documentation/scsi
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab+huawei@kernel.org>2020-03-02 09:15:49 +0100
committerMartin K. Petersen <martin.petersen@oracle.com>2020-03-11 23:08:00 -0400
commit3c1e681bcdd86b86c676044330ec945d9abc4533 (patch)
tree6b3abdcbab775d6e30e61e72e63531227f8f4201 /Documentation/scsi
parentcc0d9d3ad7e60ee0bc6f78809ef6f58f512a9cae (diff)
downloadlinux-3c1e681bcdd86b86c676044330ec945d9abc4533.tar.bz2
scsi: docs: convert g_NCR5380.txt to ReST
Link: https://lore.kernel.org/r/a66e9ea704be6a7aa81b9864ad66a32b75ab808d.1583136624.git.mchehab+huawei@kernel.org Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'Documentation/scsi')
-rw-r--r--Documentation/scsi/g_NCR5380.rst93
-rw-r--r--Documentation/scsi/g_NCR5380.txt68
-rw-r--r--Documentation/scsi/index.rst1
-rw-r--r--Documentation/scsi/scsi-parameters.txt6
4 files changed, 97 insertions, 71 deletions
diff --git a/Documentation/scsi/g_NCR5380.rst b/Documentation/scsi/g_NCR5380.rst
new file mode 100644
index 000000000000..a282059fec43
--- /dev/null
+++ b/Documentation/scsi/g_NCR5380.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+==========================================
+README file for the Linux g_NCR5380 driver
+==========================================
+
+Copyright |copy| 1993 Drew Eckhard
+
+NCR53c400 extensions Copyright |copy| 1994,1995,1996 Kevin Lentin
+
+This file documents the NCR53c400 extensions by Kevin Lentin and some
+enhancements to the NCR5380 core.
+
+This driver supports NCR5380 and NCR53c400 and compatible cards in port or
+memory mapped modes.
+
+Use of an interrupt is recommended, if supported by the board, as this will
+allow targets to disconnect and thereby improve SCSI bus utilization.
+
+If the irq parameter is 254 or is omitted entirely, the driver will probe
+for the correct IRQ line automatically. If the irq parameter is 0 or 255
+then no IRQ will be used.
+
+The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
+supported by the driver.
+
+This driver provides some information on what it has detected in
+/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
+time. More info to come in the future.
+
+This driver works as a module.
+When included as a module, parameters can be passed on the insmod/modprobe
+command line:
+
+ ============= ===============================================================
+ irq=xx[,...] the interrupt(s)
+ base=xx[,...] the port or base address(es) (for port or memory mapped, resp.)
+ card=xx[,...] card type(s):
+
+ == ======================================
+ 0 NCR5380,
+ 1 NCR53C400,
+ 2 NCR53C400A,
+ 3 Domex Technology Corp 3181E (DTC3181E)
+ 4 Hewlett Packard C2502
+ == ======================================
+ ============= ===============================================================
+
+These old-style parameters can support only one card:
+
+ ============= =================================================
+ ncr_irq=xx the interrupt
+ ncr_addr=xx the port or base address (for port or memory
+ mapped, resp.)
+ ncr_5380=1 to set up for a NCR5380 board
+ ncr_53c400=1 to set up for a NCR53C400 board
+ ncr_53c400a=1 to set up for a NCR53C400A board
+ dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
+ hp_c2502=1 to set up for a Hewlett Packard C2502 board
+ ============= =================================================
+
+E.g. Trantor T130B in its default configuration::
+
+ modprobe g_NCR5380 irq=5 base=0x350 card=1
+
+or alternatively, using the old syntax::
+
+ modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
+
+E.g. a port mapped NCR5380 board, driver to probe for IRQ::
+
+ modprobe g_NCR5380 base=0x350 card=0
+
+or alternatively::
+
+ modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
+
+E.g. a memory mapped NCR53C400 board with no IRQ::
+
+ modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+
+or alternatively::
+
+ modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+
+E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
+and HP C2502 at 0x300 with IRQ 7::
+
+ modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
+
+Kevin Lentin
+K.Lentin@cs.monash.edu.au
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
deleted file mode 100644
index 37b1967a00a9..000000000000
--- a/Documentation/scsi/g_NCR5380.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-README file for the Linux g_NCR5380 driver.
-
-(c) 1993 Drew Eckhard
-NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin
-
-This file documents the NCR53c400 extensions by Kevin Lentin and some
-enhancements to the NCR5380 core.
-
-This driver supports NCR5380 and NCR53c400 and compatible cards in port or
-memory mapped modes.
-
-Use of an interrupt is recommended, if supported by the board, as this will
-allow targets to disconnect and thereby improve SCSI bus utilization.
-
-If the irq parameter is 254 or is omitted entirely, the driver will probe
-for the correct IRQ line automatically. If the irq parameter is 0 or 255
-then no IRQ will be used.
-
-The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
-supported by the driver.
-
-This driver provides some information on what it has detected in
-/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
-time. More info to come in the future.
-
-This driver works as a module.
-When included as a module, parameters can be passed on the insmod/modprobe
-command line:
- irq=xx[,...] the interrupt(s)
- base=xx[,...] the port or base address(es) (for port or memory mapped, resp.)
- card=xx[,...] card type(s):
- 0 = NCR5380,
- 1 = NCR53C400,
- 2 = NCR53C400A,
- 3 = Domex Technology Corp 3181E (DTC3181E)
- 4 = Hewlett Packard C2502
-
-These old-style parameters can support only one card:
- ncr_irq=xx the interrupt
- ncr_addr=xx the port or base address (for port or memory
- mapped, resp.)
- ncr_5380=1 to set up for a NCR5380 board
- ncr_53c400=1 to set up for a NCR53C400 board
- ncr_53c400a=1 to set up for a NCR53C400A board
- dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
- hp_c2502=1 to set up for a Hewlett Packard C2502 board
-
-E.g. Trantor T130B in its default configuration:
-modprobe g_NCR5380 irq=5 base=0x350 card=1
-or alternatively, using the old syntax,
-modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
-
-E.g. a port mapped NCR5380 board, driver to probe for IRQ:
-modprobe g_NCR5380 base=0x350 card=0
-or alternatively,
-modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
-
-E.g. a memory mapped NCR53C400 board with no IRQ:
-modprobe g_NCR5380 irq=255 base=0xc8000 card=1
-or alternatively,
-modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
-
-E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
-and HP C2502 at 0x300 with IRQ 7:
-modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
-
-Kevin Lentin
-K.Lentin@cs.monash.edu.au
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index aad8359357e6..4b577c9e804e 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -20,5 +20,6 @@ Linux SCSI Subsystem
dc395x
dpti
FlashPoint
+ g_NCR5380
scsi_transport_srp/figures
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 266fd3b2398a..864bbf7f737b 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -57,13 +57,13 @@ parameters may be changed at runtime by the command
See header of drivers/scsi/NCR_D700.c.
ncr5380= [HW,SCSI]
- See Documentation/scsi/g_NCR5380.txt.
+ See Documentation/scsi/g_NCR5380.rst.
ncr53c400= [HW,SCSI]
- See Documentation/scsi/g_NCR5380.txt.
+ See Documentation/scsi/g_NCR5380.rst.
ncr53c400a= [HW,SCSI]
- See Documentation/scsi/g_NCR5380.txt.
+ See Documentation/scsi/g_NCR5380.rst.
ncr53c8xx= [HW,SCSI]