diff options
author | Tejun Heo <htejun@gmail.com> | 2005-09-11 09:37:19 +0900 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2005-09-10 21:04:35 -0500 |
commit | 70c83e110541e894fa16aee0f57bcf4207b33e7b (patch) | |
tree | df664702fb775e97d4169e1c7c067ce27084b1b6 /Documentation/scsi | |
parent | 6f16b5359ceb96780eac4178393b0e8a3c8aa1ea (diff) | |
download | linux-70c83e110541e894fa16aee0f57bcf4207b33e7b.tar.bz2 |
[SCSI] scsi: Error handler description document
This patch adds Documentation/scsi/scs_eh.txt. I've chosen plain
text over DocBook as most other scsi docs are in plain text and it's
more accessible.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'Documentation/scsi')
-rw-r--r-- | Documentation/scsi/00-INDEX | 2 | ||||
-rw-r--r-- | Documentation/scsi/scsi_eh.txt | 479 |
2 files changed, 481 insertions, 0 deletions
diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index f9cb5bdcce41..fef92ebf266f 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -60,6 +60,8 @@ scsi.txt - short blurb on using SCSI support as a module. scsi_mid_low_api.txt - info on API between SCSI layer and low level drivers +scsi_eh.txt + - info on SCSI midlayer error handling infrastructure st.txt - info on scsi tape driver sym53c500_cs.txt diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt new file mode 100644 index 000000000000..534a50922a7b --- /dev/null +++ b/Documentation/scsi/scsi_eh.txt @@ -0,0 +1,479 @@ + +SCSI EH +====================================== + + This document describes SCSI midlayer error handling infrastructure. +Please refer to Documentation/scsi/scsi_mid_low_api.txt for more +information regarding SCSI midlayer. + +TABLE OF CONTENTS + +[1] How SCSI commands travel through the midlayer and to EH + [1-1] struct scsi_cmnd + [1-2] How do scmd's get completed? + [1-2-1] Completing a scmd w/ scsi_done + [1-2-2] Completing a scmd w/ timeout + [1-3] How EH takes over +[2] How SCSI EH works + [2-1] EH through fine-grained callbacks + [2-1-1] Overview + [2-1-2] Flow of scmds through EH + [2-1-3] Flow of control + [2-2] EH through hostt->eh_strategy_handler() + [2-2-1] Pre hostt->eh_strategy_handler() SCSI midlayer conditions + [2-2-2] Post hostt->eh_strategy_handler() SCSI midlayer conditions + [2-2-3] Things to consider + + +[1] How SCSI commands travel through the midlayer and to EH + +[1-1] struct scsi_cmnd + + Each SCSI command is represented with struct scsi_cmnd (== scmd). A +scmd has two list_head's to link itself into lists. The two are +scmd->list and scmd->eh_entry. The former is used for free list or +per-device allocated scmd list and not of much interest to this EH +discussion. The latter is used for completion and EH lists and unless +otherwise stated scmds are always linked using scmd->eh_entry in this +discussion. + + +[1-2] How do scmd's get completed? + + Once LLDD gets hold of a scmd, either the LLDD will complete the +command by calling scsi_done callback passed from midlayer when +invoking hostt->queuecommand() or SCSI midlayer will time it out. + + +[1-2-1] Completing a scmd w/ scsi_done + + For all non-EH commands, scsi_done() is the completion callback. It +does the following. + + 1. Delete timeout timer. If it fails, it means that timeout timer + has expired and is going to finish the command. Just return. + + 2. Link scmd to per-cpu scsi_done_q using scmd->en_entry + + 3. Raise SCSI_SOFTIRQ + + SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to +determine what to do with the command. scsi_decide_disposition() +looks at the scmd->result value and sense data to determine what to do +with the command. + + - SUCCESS + scsi_finish_command() is invoked for the command. The + function does some maintenance choirs and notify completion by + calling scmd->done() callback, which, for fs requests, would + be HLD completion callback - sd:sd_rw_intr, sr:rw_intr, + st:st_intr. + + - NEEDS_RETRY + - ADD_TO_MLQUEUE + scmd is requeued to blk queue. + + - otherwise + scsi_eh_scmd_add(scmd, 0) is invoked for the command. See + [1-3] for details of this funciton. + + +[1-2-2] Completing a scmd w/ timeout + + The timeout handler is scsi_times_out(). When a timeout occurs, this +function + + 1. invokes optional hostt->eh_timedout() callback. Return value can + be one of + + - EH_HANDLED + This indicates that eh_timedout() dealt with the timeout. The + scmd is passed to __scsi_done() and thus linked into per-cpu + scsi_done_q. Normal command completion described in [1-2-1] + follows. + + - EH_RESET_TIMER + This indicates that more time is required to finish the + command. Timer is restarted. This action is counted as a + retry and only allowed scmd->allowed + 1(!) times. Once the + limit is reached, action for EH_NOT_HANDLED is taken instead. + + *NOTE* This action is racy as the LLDD could finish the scmd + after the timeout has expired but before it's added back. In + such cases, scsi_done() would think that timeout has occurred + and return without doing anything. We lose completion and the + command will time out again. + + - EH_NOT_HANDLED + This is the same as when eh_timedout() callback doesn't exist. + Step #2 is taken. + + 2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the + command. See [1-3] for more information. + + +[1-3] How EH takes over + + scmds enter EH via scsi_eh_scmd_add(), which does the following. + + 1. Turns on scmd->eh_eflags as requested. It's 0 for error + completions and SCSI_EH_CANCEL_CMD for timeouts. + + 2. Links scmd->eh_entry to shost->eh_cmd_q + + 3. Sets SHOST_RECOVERY bit in shost->shost_state + + 4. Increments shost->host_failed + + 5. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed + + As can be seen above, once any scmd is added to shost->eh_cmd_q, +SHOST_RECOVERY shost_state bit is turned on. This prevents any new +scmd to be issued from blk queue to the host; eventually, all scmds on +the host either complete normally, fail and get added to eh_cmd_q, or +time out and get added to shost->eh_cmd_q. + + If all scmds either complete or fail, the number of in-flight scmds +becomes equal to the number of failed scmds - i.e. shost->host_busy == +shost->host_failed. This wakes up SCSI EH thread. So, once woken up, +SCSI EH thread can expect that all in-flight commands have failed and +are linked on shost->eh_cmd_q. + + Note that this does not mean lower layers are quiescent. If a LLDD +completed a scmd with error status, the LLDD and lower layers are +assumed to forget about the scmd at that point. However, if a scmd +has timed out, unless hostt->eh_timedout() made lower layers forget +about the scmd, which currently no LLDD does, the command is still +active as long as lower layers are concerned and completion could +occur at any time. Of course, all such completions are ignored as the +timer has already expired. + + We'll talk about how SCSI EH takes actions to abort - make LLDD +forget about - timed out scmds later. + + +[2] How SCSI EH works + + LLDD's can implement SCSI EH actions in one of the following two +ways. + + - Fine-grained EH callbacks + LLDD can implement fine-grained EH callbacks and let SCSI + midlayer drive error handling and call appropriate callbacks. + This will be dicussed further in [2-1]. + + - eh_strategy_handler() callback + This is one big callback which should perform whole error + handling. As such, it should do all choirs SCSI midlayer + performs during recovery. This will be discussed in [2-2]. + + Once recovery is complete, SCSI EH resumes normal operation by +calling scsi_restart_operations(), which + + 1. Checks if door locking is needed and locks door. + + 2. Clears SHOST_RECOVERY shost_state bit + + 3. Wakes up waiters on shost->host_wait. This occurs if someone + calls scsi_block_when_processing_errors() on the host. + (*QUESTION* why is it needed? All operations will be blocked + anyway after it reaches blk queue.) + + 4. Kicks queues in all devices on the host in the asses + + +[2-1] EH through fine-grained callbacks + +[2-1-1] Overview + + If eh_strategy_handler() is not present, SCSI midlayer takes charge +of driving error handling. EH's goals are two - make LLDD, host and +device forget about timed out scmds and make them ready for new +commands. A scmd is said to be recovered if the scmd is forgotten by +lower layers and lower layers are ready to process or fail the scmd +again. + + To achieve these goals, EH performs recovery actions with increasing +severity. Some actions are performed by issueing SCSI commands and +others are performed by invoking one of the following fine-grained +hostt EH callbacks. Callbacks may be omitted and omitted ones are +considered to fail always. + +int (* eh_abort_handler)(struct scsi_cmnd *); +int (* eh_device_reset_handler)(struct scsi_cmnd *); +int (* eh_bus_reset_handler)(struct scsi_cmnd *); +int (* eh_host_reset_handler)(struct scsi_cmnd *); + + Higher-severity actions are taken only when lower-severity actions +cannot recover some of failed scmds. Also, note that failure of the +highest-severity action means EH failure and results in offlining of +all unrecovered devices. + + During recovery, the following rules are followed + + - Recovery actions are performed on failed scmds on the to do list, + eh_work_q. If a recovery action succeeds for a scmd, recovered + scmds are removed from eh_work_q. + + Note that single recovery action on a scmd can recover multiple + scmds. e.g. resetting a device recovers all failed scmds on the + device. + + - Higher severity actions are taken iff eh_work_q is not empty after + lower severity actions are complete. + + - EH reuses failed scmds to issue commands for recovery. For + timed-out scmds, SCSI EH ensures that LLDD forgets about a scmd + before reusing it for EH commands. + + When a scmd is recovered, the scmd is moved from eh_work_q to EH +local eh_done_q using scsi_eh_finish_cmd(). After all scmds are +recovered (eh_work_q is empty), scsi_eh_flush_done_q() is invoked to +either retry or error-finish (notify upper layer of failure) recovered +scmds. + + scmds are retried iff its sdev is still online (not offlined during +EH), REQ_FAILFAST is not set and ++scmd->retries is less than +scmd->allowed. + + +[2-1-2] Flow of scmds through EH + + 1. Error completion / time out + ACTION: scsi_eh_scmd_add() is invoked for scmd + - set scmd->eh_eflags + - add scmd to shost->eh_cmd_q + - set SHOST_RECOVERY + - shost->host_failed++ + LOCKING: shost->host_lock + + 2. EH starts + ACTION: move all scmds to EH's local eh_work_q. shost->eh_cmd_q + is cleared. + LOCKING: shost->host_lock (not strictly necessary, just for + consistency) + + 3. scmd recovered + ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd + - shost->host_failed-- + - clear scmd->eh_eflags + - scsi_setup_cmd_retry() + - move from local eh_work_q to local eh_done_q + LOCKING: none + + 4. EH completes + ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper + layer of failure. + - scmd is removed from eh_done_q and scmd->eh_entry is cleared + - if retry is necessary, scmd is requeued using + scsi_queue_insert() + - otherwise, scsi_finish_command() is invoked for scmd + LOCKING: queue or finish function performs appropriate locking + + +[2-1-3] Flow of control + + EH through fine-grained callbacks start from scsi_unjam_host(). + +<<scsi_unjam_host>> + + 1. Lock shost->host_lock, splice_init shost->eh_cmd_q into local + eh_work_q and unlock host_lock. Note that shost->eh_cmd_q is + cleared by this action. + + 2. Invoke scsi_eh_get_sense. + + <<scsi_eh_get_sense>> + + This action is taken for each error-completed + (!SCSI_EH_CANCEL_CMD) commands without valid sense data. Most + SCSI transports/LLDDs automatically acquire sense data on + command failures (autosense). Autosense is recommended for + performance reasons and as sense information could get out of + sync inbetween occurrence of CHECK CONDITION and this action. + + Note that if autosense is not supported, scmd->sense_buffer + contains invalid sense data when error-completing the scmd + with scsi_done(). scsi_decide_disposition() always returns + FAILED in such cases thus invoking SCSI EH. When the scmd + reaches here, sense data is acquired and + scsi_decide_disposition() is called again. + + 1. Invoke scsi_request_sense() which issues REQUEST_SENSE + command. If fails, no action. Note that taking no action + causes higher-severity recovery to be taken for the scmd. + + 2. Invoke scsi_decide_disposition() on the scmd + + - SUCCESS + scmd->retries is set to scmd->allowed preventing + scsi_eh_flush_done_q() from retrying the scmd and + scsi_eh_finish_cmd() is invoked. + + - NEEDS_RETRY + scsi_eh_finish_cmd() invoked + + - otherwise + No action. + + 3. If !list_empty(&eh_work_q), invoke scsi_eh_abort_cmds(). + + <<scsi_eh_abort_cmds>> + + This action is taken for each timed out command. + hostt->eh_abort_handler() is invoked for each scmd. The + handler returns SUCCESS if it has succeeded to make LLDD and + all related hardware forget about the scmd. + + If a timedout scmd is successfully aborted and the sdev is + either offline or ready, scsi_eh_finish_cmd() is invoked for + the scmd. Otherwise, the scmd is left in eh_work_q for + higher-severity actions. + + Note that both offline and ready status mean that the sdev is + ready to process new scmds, where processing also implies + immediate failing; thus, if a sdev is in one of the two + states, no further recovery action is needed. + + Device readiness is tested using scsi_eh_tur() which issues + TEST_UNIT_READY command. Note that the scmd must have been + aborted successfully before reusing it for TEST_UNIT_READY. + + 4. If !list_empty(&eh_work_q), invoke scsi_eh_ready_devs() + + <<scsi_eh_ready_devs>> + + This function takes four increasingly more severe measures to + make failed sdevs ready for new commands. + + 1. Invoke scsi_eh_stu() + + <<scsi_eh_stu>> + + For each sdev which has failed scmds with valid sense data + of which scsi_check_sense()'s verdict is FAILED, + START_STOP_UNIT command is issued w/ start=1. Note that + as we explicitly choose error-completed scmds, it is known + that lower layers have forgotten about the scmd and we can + reuse it for STU. + + If STU succeeds and the sdev is either offline or ready, + all failed scmds on the sdev are EH-finished with + scsi_eh_finish_cmd(). + + *NOTE* If hostt->eh_abort_handler() isn't implemented or + failed, we may still have timed out scmds at this point + and STU doesn't make lower layers forget about those + scmds. Yet, this function EH-finish all scmds on the sdev + if STU succeeds leaving lower layers in an inconsistent + state. It seems that STU action should be taken only when + a sdev has no timed out scmd. + + 2. If !list_empty(&eh_work_q), invoke scsi_eh_bus_device_reset(). + + <<scsi_eh_bus_device_reset>> + + This action is very similar to scsi_eh_stu() except that, + instead of issuing STU, hostt->eh_device_reset_handler() + is used. Also, as we're not issuing SCSI commands and + resetting clears all scmds on the sdev, there is no need + to choose error-completed scmds. + + 3. If !list_empty(&eh_work_q), invoke scsi_eh_bus_reset() + + <<scsi_eh_bus_reset>> + + hostt->eh_bus_reset_handler() is invoked for each channel + with failed scmds. If bus reset succeeds, all failed + scmds on all ready or offline sdevs on the channel are + EH-finished. + + 4. If !list_empty(&eh_work_q), invoke scsi_eh_host_reset() + + <<scsi_eh_host_reset>> + + This is the last resort. hostt->eh_host_reset_handler() + is invoked. If host reset succeeds, all failed scmds on + all ready or offline sdevs on the host are EH-finished. + + 5. If !list_empty(&eh_work_q), invoke scsi_eh_offline_sdevs() + + <<scsi_eh_offline_sdevs>> + + Take all sdevs which still have unrecovered scmds offline + and EH-finish the scmds. + + 5. Invoke scsi_eh_flush_done_q(). + + <<scsi_eh_flush_done_q>> + + At this point all scmds are recovered (or given up) and + put on eh_done_q by scsi_eh_finish_cmd(). This function + flushes eh_done_q by either retrying or notifying upper + layer of failure of the scmds. + + +[2-2] EH through hostt->eh_strategy_handler() + + hostt->eh_strategy_handler() is invoked in the place of +scsi_unjam_host() and it is responsible for whole recovery process. +On completion, the handler should have made lower layers forget about +all failed scmds and either ready for new commands or offline. Also, +it should perform SCSI EH maintenance choirs to maintain integrity of +SCSI midlayer. IOW, of the steps described in [2-1-2], all steps +except for #1 must be implemented by eh_strategy_handler(). + + +[2-2-1] Pre hostt->eh_strategy_handler() SCSI midlayer conditions + + The following conditions are true on entry to the handler. + + - Each failed scmd's eh_flags field is set appropriately. + + - Each failed scmd is linked on scmd->eh_cmd_q by scmd->eh_entry. + + - SHOST_RECOVERY is set. + + - shost->host_failed == shost->host_busy + + +[2-2-2] Post hostt->eh_strategy_handler() SCSI midlayer conditions + + The following conditions must be true on exit from the handler. + + - shost->host_failed is zero. + + - Each scmd's eh_eflags field is cleared. + + - Each scmd is in such a state that scsi_setup_cmd_retry() on the + scmd doesn't make any difference. + + - shost->eh_cmd_q is cleared. + + - Each scmd->eh_entry is cleared. + + - Either scsi_queue_insert() or scsi_finish_command() is called on + each scmd. Note that the handler is free to use scmd->retries and + ->allowed to limit the number of retries. + + +[2-2-3] Things to consider + + - Know that timed out scmds are still active on lower layers. Make + lower layers forget about them before doing anything else with + those scmds. + + - For consistency, when accessing/modifying shost data structure, + grab shost->host_lock. + + - On completion, each failed sdev must have forgotten about all + active scmds. + + - On completion, each failed sdev must be ready for new commands or + offline. + + +-- +Tejun Heo +htejun@gmail.com +11th September 2005 |