summaryrefslogtreecommitdiffstats
path: root/Documentation/pwm.txt
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@free-electrons.com>2016-04-14 21:17:42 +0200
committerThierry Reding <thierry.reding@gmail.com>2016-05-17 14:48:04 +0200
commita07136fdcf12281781142caf1f78c6696721accd (patch)
treec8d1ddbc038bb2e27af3fe508e51dcccb4b78ea7 /Documentation/pwm.txt
parent5ec803edcb703fe379836f13560b79dfac79b01d (diff)
downloadlinux-a07136fdcf12281781142caf1f78c6696721accd.tar.bz2
pwm: Update documentation
Update the PWM subsystem documentation to reflect the atomic PWM changes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Diffstat (limited to 'Documentation/pwm.txt')
-rw-r--r--Documentation/pwm.txt30
1 files changed, 28 insertions, 2 deletions
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt
index ca895fd211e4..789b27c6ec99 100644
--- a/Documentation/pwm.txt
+++ b/Documentation/pwm.txt
@@ -42,9 +42,26 @@ variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist.
After being requested, a PWM has to be configured using:
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
+int pwm_apply_state(struct pwm_device *pwm, struct pwm_state *state);
-To start/stop toggling the PWM output use pwm_enable()/pwm_disable().
+This API controls both the PWM period/duty_cycle config and the
+enable/disable state.
+
+The pwm_config(), pwm_enable() and pwm_disable() functions are just wrappers
+around pwm_apply_state() and should not be used if the user wants to change
+several parameter at once. For example, if you see pwm_config() and
+pwm_{enable,disable}() calls in the same function, this probably means you
+should switch to pwm_apply_state().
+
+The PWM user API also allows one to query the PWM state with pwm_get_state().
+
+In addition to the PWM state, the PWM API also exposes PWM arguments, which
+are the reference PWM config one should use on this PWM.
+PWM arguments are usually platform-specific and allows the PWM user to only
+care about dutycycle relatively to the full period (like, duty = 50% of the
+period). struct pwm_args contains 2 fields (period and polarity) and should
+be used to set the initial PWM config (usually done in the probe function
+of the PWM user). PWM arguments are retrieved with pwm_get_args().
Using PWMs with the sysfs interface
-----------------------------------
@@ -105,6 +122,15 @@ goes low for the remainder of the period. Conversely, a signal with inversed
polarity starts low for the duration of the duty cycle and goes high for the
remainder of the period.
+Drivers are encouraged to implement ->apply() instead of the legacy
+->enable(), ->disable() and ->config() methods. Doing that should provide
+atomicity in the PWM config workflow, which is required when the PWM controls
+a critical device (like a regulator).
+
+The implementation of ->get_state() (a method used to retrieve initial PWM
+state) is also encouraged for the same reason: letting the PWM user know
+about the current PWM state would allow him to avoid glitches.
+
Locking
-------