Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These rework the system-wide PM driver flags, make runtime switching
  of cpuidle governors easier, improve the user space hibernation
  interface code, add intel-speed-select interface documentation, add
  more debug messages to the ACPI code handling suspend to idle, update
  the cpufreq core and drivers, fix a minor issue in the cpuidle core
  and update two cpuidle drivers, improve the PM-runtime framework,
  update the Intel RAPL power capping driver, update devfreq core and
  drivers, and clean up the cpupower utility.

  Specifics:

   - Rework the system-wide PM driver flags to make them easier to
     understand and use and update their documentation (Rafael Wysocki,
     Alan Stern).

   - Allow cpuidle governors to be switched at run time regardless of
     the kernel configuration and update the related documentation
     accordingly (Hanjun Guo).

   - Improve the resume device handling in the user space hibernarion
     interface code (Domenico Andreoli).

   - Document the intel-speed-select sysfs interface (Srinivas
     Pandruvada).

   - Make the ACPI code handing suspend to idle print more debug
     messages to help diagnose issues with it (Rafael Wysocki).

   - Fix a helper routine in the cpufreq core and correct a typo in the
     struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
     Wenhu).

   - Update cpufreq drivers:

      - Make the intel_pstate driver start in the passive mode by
        default on systems without HWP (Rafael Wysocki).

      - Add i.MX7ULP support to the imx-cpufreq-dt driver and add
        i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).

      - Convert the qoriq cpufreq driver to a platform one, make the
        platform code create a suitable device object for it and add
        platform dependencies to it (Mian Yousaf Kaukab, Geert
        Uytterhoeven).

      - Fix wrong compatible binding in the qcom driver (Ansuel Smith).

      - Build the omap driver by default for ARCH_OMAP2PLUS (Anders
        Roxell).

      - Add r8a7742 SoC support to the dt cpufreq driver (Lad
        Prabhakar).

   - Update cpuidle core and drivers:

      - Fix three reference count leaks in error code paths in the
        cpuidle core (Qiushi Wu).

      - Convert Qualcomm SPM to a generic cpuidle driver (Stephan
        Gerhold).

      - Fix up the execution order when entering a domain idle state in
        the PSCI driver (Ulf Hansson).

   - Fix a reference counting issue related to clock management and
     clean up two oddities in the PM-runtime framework (Rafael Wysocki,
     Andy Shevchenko).

   - Add ElkhartLake support to the Intel RAPL power capping driver and
     remove an unused local MSR definition from it (Jacob Pan, Sumeet
     Pawnikar).

   - Update devfreq core and drivers:

      - Replace strncpy() with strscpy() in the devfreq core and use
        lockdep asserts instead of manual checks for a locked mutex in
        it (Dmitry Osipenko, Krzysztof Kozlowski).

      - Add a generic imx bus scaling driver and make it register an
        interconnect device (Leonard Crestez, Gustavo A. R. Silva).

      - Make the cpufreq notifier in the tegra30 driver take boosting
        into account and delete an unuseful error message from that
        driver (Dmitry Osipenko, Markus Elfring).

   - Remove unneeded semicolon from the cpupower code (Zou Wei)"

* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
  cpuidle: Fix three reference count leaks
  PM: runtime: Replace pm_runtime_callbacks_present()
  PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
  PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
  PM / devfreq: Replace strncpy with strscpy
  PM / devfreq: imx: Register interconnect device
  PM / devfreq: Add generic imx bus scaling driver
  PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
  PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
  PM: hibernate: Restrict writes to the resume device
  PM: runtime: clk: Fix clk_pm_runtime_get() error path
  cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
  ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
  ACPI: PM: s2idle: Print type of wakeup debug messages
  powercap: RAPL: remove unused local MSR define
  PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
  Documentation: admin-guide: pm: Document intel-speed-select
  PM: hibernate: Split off snapshot dev option
  PM: hibernate: Incorporate concurrency handling
  Documentation: ABI: make current_governer_ro as a candidate for removal
  ...

1 files changed, 28 insertions, 30 deletions

diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
index 0924d29636ad..1831e431f725 100644
--- a/Documentation/power/pci.rst
+++ b/Documentation/power/pci.rst
@@ -1004,41 +1004,39 @@ including the PCI bus type.  The flags should be set once at the driver probe
 time with the help of the dev_pm_set_driver_flags() function and they should not
 be updated directly afterwards.
 
-The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete
-mechanism allowing device suspend/resume callbacks to be skipped if the device
-is in runtime suspend when the system suspend starts.  That also affects all of
-the ancestors of the device, so this flag should only be used if absolutely
-necessary.
-
-The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a
-positive value from pci_pm_prepare() if the ->prepare callback provided by the
+The DPM_FLAG_NO_DIRECT_COMPLETE flag prevents the PM core from using the
+direct-complete mechanism allowing device suspend/resume callbacks to be skipped
+if the device is in runtime suspend when the system suspend starts.  That also
+affects all of the ancestors of the device, so this flag should only be used if
+absolutely necessary.
+
+The DPM_FLAG_SMART_PREPARE flag causes the PCI bus type to return a positive
+value from pci_pm_prepare() only if the ->prepare callback provided by the
 driver of the device returns a positive value.  That allows the driver to opt
-out from using the direct-complete mechanism dynamically.
+out from using the direct-complete mechanism dynamically (whereas setting
+DPM_FLAG_NO_DIRECT_COMPLETE means permanent opt-out).
 
 The DPM_FLAG_SMART_SUSPEND flag tells the PCI bus type that from the driver's
 perspective the device can be safely left in runtime suspend during system
 suspend.  That causes pci_pm_suspend(), pci_pm_freeze() and pci_pm_poweroff()
-to skip resuming the device from runtime suspend unless there are PCI-specific
-reasons for doing that.  Also, it causes pci_pm_suspend_late/noirq(),
-pci_pm_freeze_late/noirq() and pci_pm_poweroff_late/noirq() to return early
-if the device remains in runtime suspend in the beginning of the "late" phase
-of the system-wide transition under way.  Moreover, if the device is in
-runtime suspend in pci_pm_resume_noirq() or pci_pm_restore_noirq(), its runtime
-power management status will be changed to "active" (as it is going to be put
-into D0 going forward), but if it is in runtime suspend in pci_pm_thaw_noirq(),
-the function will set the power.direct_complete flag for it (to make the PM core
-skip the subsequent "thaw" callbacks for it) and return.
-
-Setting the DPM_FLAG_LEAVE_SUSPENDED flag means that the driver prefers the
-device to be left in suspend after system-wide transitions to the working state.
-This flag is checked by the PM core, but the PCI bus type informs the PM core
-which devices may be left in suspend from its perspective (that happens during
-the "noirq" phase of system-wide suspend and analogous transitions) and next it
-uses the dev_pm_may_skip_resume() helper to decide whether or not to return from
-pci_pm_resume_noirq() early, as the PM core will skip the remaining resume
-callbacks for the device during the transition under way and will set its
-runtime PM status to "suspended" if dev_pm_may_skip_resume() returns "true" for
-it.
+to avoid resuming the device from runtime suspend unless there are PCI-specific
+reasons for doing that.  Also, it causes pci_pm_suspend_late/noirq() and
+pci_pm_poweroff_late/noirq() to return early if the device remains in runtime
+suspend during the "late" phase of the system-wide transition under way.
+Moreover, if the device is in runtime suspend in pci_pm_resume_noirq() or
+pci_pm_restore_noirq(), its runtime PM status will be changed to "active" (as it
+is going to be put into D0 going forward).
+
+Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows its
+"noirq" and "early" resume callbacks to be skipped if the device can be left
+in suspend after a system-wide transition into the working state.  This flag is
+taken into consideration by the PM core along with the power.may_skip_resume
+status bit of the device which is set by pci_pm_suspend_noirq() in certain
+situations.  If the PM core determines that the driver's "noirq" and "early"
+resume callbacks should be skipped, the dev_pm_skip_resume() helper function
+will return "true" and that will cause pci_pm_resume_noirq() and
+pci_pm_resume_early() to return upfront without touching the device and
+executing the driver callbacks.
 
 3.2. Device Runtime Power Management
 ------------------------------------