diff options
| author | Bjorn Helgaas <bhelgaas@google.com> | 2019-10-08 15:28:00 -0500 |
|---|---|---|
| committer | Bjorn Helgaas <bhelgaas@google.com> | 2019-11-20 17:33:46 -0600 |
| commit | 85a9b0507db2fbbfe7912dc3b33d322f200e2ca7 (patch) | |
| tree | 31cec9768bc0e39466f2c7bd7d5e96815f2c12d9 /Documentation/power | |
| parent | 6da2f2ccfd2deb81a63fc23a505ccd72de005c39 (diff) | |
| download | linux-85a9b0507db2fbbfe7912dc3b33d322f200e2ca7.tar.bz2 | |
PCI/PM: Note that PME can be generated from D0
Per PCIe r5.0 sec 7.5.2.1, PME may be generated from D0, so update
Documentation/power/pci.rst to reflect that.
Link: https://lore.kernel.org/r/20191016194450.68959-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'Documentation/power')
| -rw-r--r-- | Documentation/power/pci.rst | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst index 1525c594d631..8a4abb7c7363 100644 --- a/Documentation/power/pci.rst +++ b/Documentation/power/pci.rst @@ -130,8 +130,8 @@ a full power-on reset sequence and the power-on defaults are restored to the device by hardware just as at initial power up. PCI devices supporting the PCI PM Spec can be programmed to generate PMEs -while in a low-power state (D1-D3), but they are not required to be capable -of generating PMEs from all supported low-power states. In particular, the +while in any power state (D0-D3), but they are not required to be capable +of generating PMEs from all supported power states. In particular, the capability of generating PMEs from D3cold is optional and depends on the presence of additional voltage (3.3Vaux) allowing the device to remain sufficiently active to generate a wakeup signal. |