docs: networking: convert fore200e.txt to ReST

- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 64 deletions

diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt
deleted file mode 100644
index 1f98f62b4370..000000000000
--- a/Documentation/networking/fore200e.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-
-FORE Systems PCA-200E/SBA-200E ATM NIC driver
----------------------------------------------
-
-This driver adds support for the FORE Systems 200E-series ATM adapters
-to the Linux operating system. It is based on the earlier PCA-200E driver
-written by Uwe Dannowski.
-
-The driver simultaneously supports PCA-200E and SBA-200E adapters on
-i386, alpha (untested), powerpc, sparc and sparc64 archs.
-
-The intent is to enable the use of different models of FORE adapters at the
-same time, by hosts that have several bus interfaces (such as PCI+SBUS,
-or PCI+EISA).
-
-Only PCI and SBUS devices are currently supported by the driver, but support
-for other bus interfaces such as EISA should not be too hard to add.
-
-
-Firmware Copyright Notice
--------------------------
-
-Please read the fore200e_firmware_copyright file present
-in the linux/drivers/atm directory for details and restrictions.
-
-
-Firmware Updates
-----------------
-
-The FORE Systems 200E-series driver is shipped with firmware data being 
-uploaded to the ATM adapters at system boot time or at module loading time. 
-The supplied firmware images should work with all adapters.
-
-However, if you encounter problems (the firmware doesn't start or the driver
-is unable to read the PROM data), you may consider trying another firmware
-version. Alternative binary firmware images can be found somewhere on the
-ForeThought CD-ROM supplied with your adapter by FORE Systems.
-
-You can also get the latest firmware images from FORE Systems at
-https://en.wikipedia.org/wiki/FORE_Systems. Register TACTics Online and go to
-the 'software updates' pages. The firmware binaries are part of
-the various ForeThought software distributions.
-
-Notice that different versions of the PCA-200E firmware exist, depending
-on the endianness of the host architecture. The driver is shipped with
-both little and big endian PCA firmware images.
-
-Name and location of the new firmware images can be set at kernel
-configuration time:
-
-1. Copy the new firmware binary files (with .bin, .bin1 or .bin2 suffix)
-   to some directory, such as linux/drivers/atm.
-
-2. Reconfigure your kernel to set the new firmware name and location.
-   Expected pathnames are absolute or relative to the drivers/atm directory.
-
-3. Rebuild and re-install your kernel or your module.
-
-
-Feedback
---------
-
-Feedback is welcome. Please send success stories/bug reports/
-patches/improvement/comments/flames to <lizzi@cnam.fr>.