diff options
| author | Tilman Schmidt <tilman@imap.cc> | 2010-02-22 13:08:51 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-02-26 01:24:22 -0800 |
| commit | 2ac2ed5f2dfc97ae9ed9f446ad6e064fa821ef6d (patch) | |
| tree | 2573550bf616aca85bad79a4bf868a5a4669989e /Documentation/isdn/README.gigaset | |
| parent | 9abd5438641425c2f8a3a399c921747a4fb55adc (diff) | |
| download | linux-2ac2ed5f2dfc97ae9ed9f446ad6e064fa821ef6d.tar.bz2 | |
gigaset: small documentation improvement
Clarify the non-support by isdnlog, and propose a better standard
debug mask.
Impact: Documentation
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/isdn/README.gigaset')
| -rw-r--r-- | Documentation/isdn/README.gigaset | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index 794941fc9493..e472df842323 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -292,10 +292,10 @@ GigaSet 307x Device Driver to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file. Problem: - Your isdn script aborts with a message about isdnlog. + The isdnlog program emits error messages or just doesn't work. Solution: - Try deactivating (or commenting out) isdnlog. This driver does not - support it. + Isdnlog supports only the HiSax driver. Do not attempt to use it with + other drivers such as Gigaset. Problem: You have two or more DECT data adapters (M101/M105) and only the @@ -321,8 +321,8 @@ GigaSet 307x Device Driver writing an appropriate value to /sys/module/gigaset/parameters/debug, e.g. echo 0 > /sys/module/gigaset/parameters/debug switches off debugging output completely, - echo 0x10a020 > /sys/module/gigaset/parameters/debug - enables the standard set of debugging output messages. These values are + echo 0x302020 > /sys/module/gigaset/parameters/debug + enables a reasonable set of debugging output messages. These values are bit patterns where every bit controls a certain type of debugging output. See the constants DEBUG_* in the source file gigaset.h for details. |