summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
diff options
context:
space:
mode:
authorErik Rosen <erik.rosen@metormote.com>2021-02-18 12:52:49 +0100
committerGuenter Roeck <linux@roeck-us.net>2021-04-20 06:50:14 -0700
commit42bfe7dd0f9918fb796049e2d159dedc6865f480 (patch)
tree67d82ef24084307f9ca60dbcf0aa770b6296837f /Documentation/hwmon
parentd3e33067a6e4594edc70d0687feedb249079547c (diff)
downloadlinux-42bfe7dd0f9918fb796049e2d159dedc6865f480.tar.bz2
hwmon: (pmbus/stpddc60) Add ST STPDDC60 pmbus driver
Add hardware monitoring support for ST STPDDC60 Unversal Digital Multicell Controller. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-3-erik.rosen@metormote.com [groeck: Fixed whitespace error in Makefile] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'Documentation/hwmon')
-rw-r--r--Documentation/hwmon/index.rst1
-rw-r--r--Documentation/hwmon/stpddc60.rst90
2 files changed, 91 insertions, 0 deletions
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index b34894403c2b..d4b422edbe3a 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -169,6 +169,7 @@ Hardware Monitoring Kernel Drivers
smsc47m192
smsc47m1
sparx5-temp
+ stpddc60
tc654
tc74
thmc50
diff --git a/Documentation/hwmon/stpddc60.rst b/Documentation/hwmon/stpddc60.rst
new file mode 100644
index 000000000000..7f7ce7f7871b
--- /dev/null
+++ b/Documentation/hwmon/stpddc60.rst
@@ -0,0 +1,90 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver stpddc60
+======================
+
+Supported chips:
+
+ * ST STPDDC60
+
+ Prefix: 'stpddc60', 'bmr481'
+
+ Addresses scanned: -
+
+ Datasheet: https://flexpowermodules.com/documents/fpm-techspec-bmr481
+
+Author: Erik Rosen <erik.rosen@metormote.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for ST STPDDC60 controller chip and
+compatible modules.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+The vout under- and over-voltage limits are set in relation to the commanded
+output voltage as a positive or negative offset in the interval 50mV to 400mV
+in 50mV steps. This means that the absolute values of the limits will change
+when the commanded output voltage changes. Also, care should be taken when
+writing to those limits since in the worst case the commanded output voltage
+could change at the same time as the limit is written to, wich will lead to
+unpredictable results.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Vin, iout, pout and temp limits
+are read-write; all other attributes are read-only.
+
+======================= ========================================================
+in1_label "vin"
+in1_input Measured input voltage.
+in1_lcrit Critical minimum input voltage.
+in1_crit Critical maximum input voltage.
+in1_lcrit_alarm Input voltage critical low alarm.
+in1_crit_alarm Input voltage critical high alarm.
+
+in2_label "vout1"
+in2_input Measured output voltage.
+in2_lcrit Critical minimum output voltage.
+in2_crit Critical maximum output voltage.
+in2_lcrit_alarm Critical output voltage critical low alarm.
+in2_crit_alarm Critical output voltage critical high alarm.
+
+curr1_label "iout1"
+curr1_input Measured output current.
+curr1_max Maximum output current.
+curr1_max_alarm Output current high alarm.
+curr1_crit Critical maximum output current.
+curr1_crit_alarm Output current critical high alarm.
+
+power1_label "pout1"
+power1_input Measured output power.
+power1_crit Critical maximum output power.
+power1_crit_alarm Output power critical high alarm.
+
+temp1_input Measured maximum temperature of all phases.
+temp1_max Maximum temperature limit.
+temp1_max_alarm High temperature alarm.
+temp1_crit Critical maximum temperature limit.
+temp1_crit_alarm Critical maximum temperature alarm.
+======================= ========================================================