docs: hwmon: pmbus files: convert to ReST format

Convert pmbus files to ReST format, in order to allow them to
be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 61 insertions, 8 deletions

diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 477a94b131ae..4029970bace4 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -2,57 +2,106 @@ Kernel driver zl6100
 ====================
 
 Supported chips:
+
   * Intersil / Zilker Labs ZL2004
+
     Prefix: 'zl2004'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn6847.pdf
+
   * Intersil / Zilker Labs ZL2005
+
     Prefix: 'zl2005'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn6848.pdf
+
   * Intersil / Zilker Labs ZL2006
+
     Prefix: 'zl2006'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn6850.pdf
+
   * Intersil / Zilker Labs ZL2008
+
     Prefix: 'zl2008'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn6859.pdf
+
   * Intersil / Zilker Labs ZL2105
+
     Prefix: 'zl2105'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn6851.pdf
+
   * Intersil / Zilker Labs ZL2106
+
     Prefix: 'zl2106'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn6852.pdf
+
   * Intersil / Zilker Labs ZL6100
+
     Prefix: 'zl6100'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn6876.pdf
+
   * Intersil / Zilker Labs ZL6105
+
     Prefix: 'zl6105'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
+
   * Intersil / Zilker Labs ZL9101M
+
     Prefix: 'zl9101'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn7669.pdf
+
   * Intersil / Zilker Labs ZL9117M
+
     Prefix: 'zl9117'
+
     Addresses scanned: -
+
     Datasheet: http://www.intersil.com/data/fn/fn7914.pdf
+
   * Ericsson BMR450, BMR451
+
     Prefix: 'bmr450', 'bmr451'
+
     Addresses scanned: -
+
     Datasheet:
+
 http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401
+
   * Ericsson BMR462, BMR463, BMR464
+
     Prefixes: 'bmr462', 'bmr463', 'bmr464'
+
     Addresses scanned: -
+
     Datasheet:
-http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
 
+	http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
 
 Author: Guenter Roeck <linux@roeck-us.net>
 
@@ -75,13 +124,15 @@ This driver does not auto-detect devices. You will have to instantiate the
 devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
-WARNING: Do not access chip registers using the i2cdump command, and do not use
-any of the i2ctools commands on a command register used to save and restore
-configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by
-this driver interpret any access to those command registers (including read
-commands) as request to execute the command in question. Unless write accesses
-to those registers are protected, this may result in power loss, board resets,
-and/or Flash corruption. Worst case, your board may turn into a brick.
+.. warning::
+
+  Do not access chip registers using the i2cdump command, and do not use
+  any of the i2ctools commands on a command register used to save and restore
+  configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by
+  this driver interpret any access to those command registers (including read
+  commands) as request to execute the command in question. Unless write accesses
+  to those registers are protected, this may result in power loss, board resets,
+  and/or Flash corruption. Worst case, your board may turn into a brick.
 
 
 Platform data support
@@ -110,6 +161,7 @@ Sysfs entries
 The following attributes are supported. Limits are read-write; all other
 attributes are read-only.
 
+======================= ========================================================
 in1_label		"vin"
 in1_input		Measured input voltage.
 in1_min			Minimum input voltage.
@@ -158,3 +210,4 @@ temp[12]_min_alarm	Chip temperature low alarm.
 temp[12]_max_alarm	Chip temperature high alarm.
 temp[12]_lcrit_alarm	Chip temperature critical low alarm.
 temp[12]_crit_alarm	Chip temperature critical high alarm.
+======================= ========================================================