summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/max6650
diff options
context:
space:
mode:
authorHans-Juergen Koch <hjk@linutronix.de>2007-05-08 17:22:00 +0200
committerJean Delvare <khali@hyperion.delvare>2007-05-08 17:22:00 +0200
commitd20620de0c3de622a9d6a841725bafaed6d1aec2 (patch)
tree5dbd1f0f04b44c0af6711b28a4fccc41b8bdaace /Documentation/hwmon/max6650
parente84cfbcbe830c20af030fd7ba37edf8ed88fda5f (diff)
downloadlinux-d20620de0c3de622a9d6a841725bafaed6d1aec2.tar.bz2
hwmon: New max6650 driver
This driver supports the Maxim MAX6650 and MAX6651 fan speed monitoring and control chips. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'Documentation/hwmon/max6650')
-rw-r--r--Documentation/hwmon/max665053
1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650
new file mode 100644
index 000000000000..8be7beb9e3e8
--- /dev/null
+++ b/Documentation/hwmon/max6650
@@ -0,0 +1,53 @@
+Kernel driver max6650
+=====================
+
+Supported chips:
+ * Maxim 6650 / 6651
+ Prefix: 'max6650'
+ Addresses scanned: I2C 0x1b, 0x1f, 0x48, 0x4b
+ Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
+
+Authors:
+ Hans J. Koch <hjk@linutronix.de>
+ John Morris <john.morris@spirentcom.com>
+ Claus Gindhart <claus.gindhart@kontron.com>
+
+Description
+-----------
+
+This driver implements support for the Maxim 6650/6651
+
+The 2 devices are very similar, but the Maxim 6550 has a reduced feature
+set, e.g. only one fan-input, instead of 4 for the 6651.
+
+The driver is not able to distinguish between the 2 devices.
+
+The driver provides the following sensor accesses in sysfs:
+
+fan1_input ro fan tachometer speed in RPM
+fan2_input ro "
+fan3_input ro "
+fan4_input ro "
+fan1_target rw desired fan speed in RPM (closed loop mode only)
+pwm1_enable rw regulator mode, 0=full on, 1=open loop, 2=closed loop
+pwm1 rw relative speed (0-255), 255=max. speed.
+ Used in open loop mode only.
+fan1_div rw sets the speed range the inputs can handle. Legal
+ values are 1, 2, 4, and 8. Use lower values for
+ faster fans.
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the MAX6650/6651 correctly, you can
+simply load your module without parameters. It won't touch the configuration
+registers then. If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+
+voltage_12V: 5=5V fan, 12=12V fan, 0=don't change
+prescaler: Possible values are 1,2,4,8,16, or 0 for don't change
+clock: The clock frequency in Hz of the chip the driver should assume [254000]
+
+Please have a look at the MAX6650/6651 data sheet and make sure that you fully
+understand the meaning of these parameters before you attempt to change them.
+