docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 137 insertions, 0 deletions

diff --git a/Documentation/hwmon/lm25066.rst b/Documentation/hwmon/lm25066.rst
new file mode 100644
index 000000000000..da15e3094c8c
--- /dev/null
+++ b/Documentation/hwmon/lm25066.rst
@@ -0,0 +1,137 @@
+Kernel driver lm25066
+=====================
+
+Supported chips:
+
+  * TI LM25056
+
+    Prefix: 'lm25056'
+
+    Addresses scanned: -
+
+    Datasheets:
+
+	http://www.ti.com/lit/gpn/lm25056
+
+	http://www.ti.com/lit/gpn/lm25056a
+
+  * National Semiconductor LM25066
+
+    Prefix: 'lm25066'
+
+    Addresses scanned: -
+
+    Datasheets:
+
+	http://www.national.com/pf/LM/LM25066.html
+
+	http://www.national.com/pf/LM/LM25066A.html
+
+  * National Semiconductor LM5064
+
+    Prefix: 'lm5064'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+	http://www.national.com/pf/LM/LM5064.html
+
+  * National Semiconductor LM5066
+
+    Prefix: 'lm5066'
+
+    Addresses scanned: -
+
+    Datasheet:
+
+	http://www.national.com/pf/LM/LM5066.html
+
+  * Texas Instruments LM5066I
+
+    Prefix: 'lm5066i'
+
+    Addresses scanned: -
+
+	Datasheet:
+
+    http://www.ti.com/product/LM5066I
+
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for National Semiconductor / TI LM25056,
+LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
+Control, and Protection ICs.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= =======================================================
+in1_label		"vin"
+in1_input		Measured input voltage.
+in1_average		Average measured input voltage.
+in1_min			Minimum input voltage.
+in1_max			Maximum input voltage.
+in1_min_alarm		Input voltage low alarm.
+in1_max_alarm		Input voltage high alarm.
+
+in2_label		"vmon"
+in2_input		Measured voltage on VAUX pin
+in2_min			Minimum VAUX voltage (LM25056 only).
+in2_max			Maximum VAUX voltage (LM25056 only).
+in2_min_alarm		VAUX voltage low alarm (LM25056 only).
+in2_max_alarm		VAUX voltage high alarm (LM25056 only).
+
+in3_label		"vout1"
+			Not supported on LM25056.
+in3_input		Measured output voltage.
+in3_average		Average measured output voltage.
+in3_min			Minimum output voltage.
+in3_min_alarm		Output voltage low alarm.
+
+curr1_label		"iin"
+curr1_input		Measured input current.
+curr1_average		Average measured input current.
+curr1_max		Maximum input current.
+curr1_max_alarm		Input current high alarm.
+
+power1_label		"pin"
+power1_input		Measured input power.
+power1_average		Average measured input power.
+power1_max		Maximum input power limit.
+power1_alarm		Input power alarm
+power1_input_highest	Historical maximum power.
+power1_reset_history	Write any value to reset maximum power history.
+
+temp1_input		Measured temperature.
+temp1_max		Maximum temperature.
+temp1_crit		Critical high temperature.
+temp1_max_alarm		Chip temperature high alarm.
+temp1_crit_alarm	Chip temperature critical high alarm.
+======================= =======================================================