docs: hwmon: convert three docs to ReST format

Those three new drivers were missed on the initial conversion
to ReST format. So:

- Rename them to .rst;
- Add them to the hwmon index.rst index;
- add some blank lines at the "Supported systems:" part, in
  order to allow Sphinx to properly identify new lines,
  suppressing warnings and avoid it to output some random
  lines in bold;
- When multiple authors are involved, change the authors
  part to a list, in order to avoid adding blank lines.
- adjust the table cells (one of the tables seemed to be
  assuming that tab is 4 positions instead of 8) and add
  the table markup.
- be sure that the section markups have the same number of
  characters as the section title.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 66 insertions, 0 deletions

diff --git a/Documentation/hwmon/ir38064.rst b/Documentation/hwmon/ir38064.rst
new file mode 100644
index 000000000000..c455d755a267
--- /dev/null
+++ b/Documentation/hwmon/ir38064.rst
@@ -0,0 +1,66 @@
+Kernel driver ir38064
+=====================
+
+Supported chips:
+
+  * Infineon IR38064
+
+    Prefix: 'ir38064'
+    Addresses scanned: -
+
+    Datasheet: Publicly available at the Infineon webiste
+      https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
+
+Authors:
+      - Maxim Sloyko <maxims@google.com>
+      - Patrick Venture <venture@google.com>
+
+Description
+-----------
+
+IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+======================= ===========================
+curr1_label		"iout1"
+curr1_input		Measured output current
+curr1_crit		Critical maximum current
+curr1_crit_alarm	Current critical high alarm
+curr1_max		Maximum current
+curr1_max_alarm		Current high alarm
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_crit		Critical maximum input voltage
+in1_crit_alarm		Input voltage critical high alarm
+in1_min			Minimum input voltage
+in1_min_alarm		Input voltage low alarm
+
+in2_label		"vout1"
+in2_input		Measured output voltage
+in2_lcrit		Critical minimum output voltage
+in2_lcrit_alarm		Output voltage critical low alarm
+in2_crit		Critical maximum output voltage
+in2_crit_alarm		Output voltage critical high alarm
+in2_max			Maximum output voltage
+in2_max_alarm		Output voltage high alarm
+in2_min			Minimum output voltage
+in2_min_alarm		Output voltage low alarm
+
+power1_label		"pout1"
+power1_input		Measured output power
+
+temp1_input		Measured temperature
+temp1_crit		Critical high temperature
+temp1_crit_alarm	Chip temperature critical high alarm
+temp1_max		Maximum temperature
+temp1_max_alarm		Chip temperature high alarm
+======================= ===========================