docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 92 insertions, 0 deletions

diff --git a/Documentation/hwmon/ir35221.rst b/Documentation/hwmon/ir35221.rst
new file mode 100644
index 000000000000..a83922e5ccb5
--- /dev/null
+++ b/Documentation/hwmon/ir35221.rst
@@ -0,0 +1,92 @@
+Kernel driver ir35221
+=====================
+
+Supported chips:
+  * Infineon IR35221
+
+    Prefix: 'ir35221'
+
+    Addresses scanned: -
+
+    Datasheet: Datasheet is not publicly available.
+
+Author: Samuel Mendoza-Jonas <sam@mendozajonas.com>
+
+
+Description
+-----------
+
+IR35221 is a Digital DC-DC Multiphase Converter
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Example: the following commands will load the driver for an IR35221
+at address 0x70 on I2C bus #4::
+
+	# modprobe ir35221
+	# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+
+
+Sysfs attributes
+----------------
+
+======================= =======================================================
+curr1_label		"iin"
+curr1_input		Measured input current
+curr1_max		Maximum current
+curr1_max_alarm		Current high alarm
+
+curr[2-3]_label		"iout[1-2]"
+curr[2-3]_input		Measured output current
+curr[2-3]_crit		Critical maximum current
+curr[2-3]_crit_alarm	Current critical high alarm
+curr[2-3]_highest	Highest output current
+curr[2-3]_lowest	Lowest output current
+curr[2-3]_max		Maximum current
+curr[2-3]_max_alarm	Current high alarm
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_crit		Critical maximum input voltage
+in1_crit_alarm		Input voltage critical high alarm
+in1_highest		Highest input voltage
+in1_lowest		Lowest input voltage
+in1_min			Minimum input voltage
+in1_min_alarm		Input voltage low alarm
+
+in[2-3]_label		"vout[1-2]"
+in[2-3]_input		Measured output voltage
+in[2-3]_lcrit		Critical minimum output voltage
+in[2-3]_lcrit_alarm	Output voltage critical low alarm
+in[2-3]_crit		Critical maximum output voltage
+in[2-3]_crit_alarm	Output voltage critical high alarm
+in[2-3]_highest		Highest output voltage
+in[2-3]_lowest		Lowest output voltage
+in[2-3]_max		Maximum output voltage
+in[2-3]_max_alarm	Output voltage high alarm
+in[2-3]_min		Minimum output voltage
+in[2-3]_min_alarm	Output voltage low alarm
+
+power1_label		"pin"
+power1_input		Measured input power
+power1_alarm		Input power high alarm
+power1_max		Input power limit
+
+power[2-3]_label	"pout[1-2]"
+power[2-3]_input	Measured output power
+power[2-3]_max		Output power limit
+power[2-3]_max_alarm	Output power high alarm
+
+temp[1-2]_input		Measured temperature
+temp[1-2]_crit		Critical high temperature
+temp[1-2]_crit_alarm	Chip temperature critical high alarm
+temp[1-2]_highest	Highest temperature
+temp[1-2]_lowest	Lowest temperature
+temp[1-2]_max		Maximum temperature
+temp[1-2]_max_alarm	Chip temperature high alarm
+======================= =======================================================