docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 87 deletions

diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv
deleted file mode 100644
index 5d642bc3dec0..000000000000
--- a/Documentation/hwmon/ibmpowernv
+++ /dev/null
@@ -1,87 +0,0 @@
-Kernel Driver IBMPOWERNV
-========================
-
-Supported systems:
-
-  * Any recent IBM P servers based on POWERNV platform
-
-Author: Neelesh Gupta
-
-Description
------------
-
-This driver implements reading the platform sensors data like temperature/fan/
-voltage/power for 'POWERNV' platform.
-
-The driver uses the platform device infrastructure. It probes the device tree
-for sensor devices during the __init phase and registers them with the 'hwmon'.
-'hwmon' populates the 'sysfs' tree having attribute files, each for a given
-sensor type and its attribute data.
-
-All the nodes in the DT appear under "/ibm,opal/sensors" and each valid node in
-the DT maps to an attribute file in 'sysfs'. The node exports unique 'sensor-id'
-which the driver uses to make an OPAL call to the firmware.
-
-Usage notes
------------
-The driver is built statically with the kernel by enabling the config
-CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'.
-
-Sysfs attributes
-----------------
-
-======================= =======================================================
-fanX_input		Measured RPM value.
-fanX_min		Threshold RPM for alert generation.
-fanX_fault		- 0: No fail condition
-			- 1: Failing fan
-
-tempX_input		Measured ambient temperature.
-tempX_max		Threshold ambient temperature for alert generation.
-tempX_highest		Historical maximum temperature
-tempX_lowest		Historical minimum temperature
-tempX_enable		Enable/disable all temperature sensors belonging to the
-			sub-group. In POWER9, this attribute corresponds to
-			each OCC. Using this attribute each OCC can be asked to
-			disable/enable all of its temperature sensors.
-
-			- 1: Enable
-			- 0: Disable
-
-inX_input		Measured power supply voltage (millivolt)
-inX_fault		- 0: No fail condition.
-			- 1: Failing power supply.
-inX_highest		Historical maximum voltage
-inX_lowest		Historical minimum voltage
-inX_enable		Enable/disable all voltage sensors belonging to the
-			sub-group. In POWER9, this attribute corresponds to
-			each OCC. Using this attribute each OCC can be asked to
-			disable/enable all of its voltage sensors.
-
-			- 1: Enable
-			- 0: Disable
-
-powerX_input		Power consumption (microWatt)
-powerX_input_highest	Historical maximum power
-powerX_input_lowest	Historical minimum power
-powerX_enable		Enable/disable all power sensors belonging to the
-			sub-group. In POWER9, this attribute corresponds to
-			each OCC. Using this attribute each OCC can be asked to
-			disable/enable all of its power sensors.
-
-			- 1: Enable
-			- 0: Disable
-
-currX_input		Measured current (milliampere)
-currX_highest		Historical maximum current
-currX_lowest		Historical minimum current
-currX_enable		Enable/disable all current sensors belonging to the
-			sub-group. In POWER9, this attribute corresponds to
-			each OCC. Using this attribute each OCC can be asked to
-			disable/enable all of its current sensors.
-
-			- 1: Enable
-			- 0: Disable
-
-energyX_input		Cumulative energy (microJoule)
-======================= =======================================================