diff options
author | Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 2019-06-28 09:19:59 -0300 |
---|---|---|
committer | Benjamin Tissoires <benjamin.tissoires@redhat.com> | 2019-07-02 10:19:34 +0200 |
commit | cca4786174656673f89684347e0028c88df57031 (patch) | |
tree | 9ae5ebb561ac93fc6138758acaae1b1e5fdb8c9d /Documentation/hid/hid-alps.rst | |
parent | 763cf1f2d9bfc8349c5791689074c8c17edf660d (diff) | |
download | linux-cca4786174656673f89684347e0028c88df57031.tar.bz2 |
docs: hid: convert to ReST
Rename the HID documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
While here, fix the sysfs example from hid-sensor.txt, that
has a lot of "?" instead of the proper UTF-8 characters that
are produced by the tree command.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Diffstat (limited to 'Documentation/hid/hid-alps.rst')
-rw-r--r-- | Documentation/hid/hid-alps.rst | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/Documentation/hid/hid-alps.rst b/Documentation/hid/hid-alps.rst new file mode 100644 index 000000000000..e2f4c4c11e3f --- /dev/null +++ b/Documentation/hid/hid-alps.rst @@ -0,0 +1,180 @@ +========================== +ALPS HID Touchpad Protocol +========================== + +Introduction +------------ +Currently ALPS HID driver supports U1 Touchpad device. + +U1 device basic information. + +========== ====== +Vender ID 0x044E +Product ID 0x120B +Version ID 0x0121 +========== ====== + + +HID Descriptor +-------------- + +======= ==================== ===== ======================================= +Byte Field Value Notes +======= ==================== ===== ======================================= +0 wHIDDescLength 001E Length of HID Descriptor : 30 bytes +2 bcdVersion 0100 Compliant with Version 1.00 +4 wReportDescLength 00B2 Report Descriptor is 178 Bytes (0x00B2) +6 wReportDescRegister 0002 Identifier to read Report Descriptor +8 wInputRegister 0003 Identifier to read Input Report +10 wMaxInputLength 0053 Input Report is 80 Bytes + 2 +12 wOutputRegister 0000 Identifier to read Output Report +14 wMaxOutputLength 0000 No Output Reports +16 wCommandRegister 0005 Identifier for Command Register +18 wDataRegister 0006 Identifier for Data Register +20 wVendorID 044E Vendor ID 0x044E +22 wProductID 120B Product ID 0x120B +24 wVersionID 0121 Version 01.21 +26 RESERVED 0000 RESERVED +======= ==================== ===== ======================================= + + +Report ID +--------- + +========== ================= ========================================= +ReportID-1 (Input Reports) (HIDUsage-Mouse) for TP&SP +ReportID-2 (Input Reports) (HIDUsage-keyboard) for TP +ReportID-3 (Input Reports) (Vendor Usage: Max 10 finger data) for TP +ReportID-4 (Input Reports) (Vendor Usage: ON bit data) for GP +ReportID-5 (Feature Reports) Feature Reports +ReportID-6 (Input Reports) (Vendor Usage: StickPointer data) for SP +ReportID-7 (Feature Reports) Flash update (Bootloader) +========== ================= ========================================= + + +Data pattern +------------ + +===== ========== ===== ================= +Case1 ReportID_1 TP/SP Relative/Relative +Case2 ReportID_3 TP Absolute + ReportID_6 SP Absolute +===== ========== ===== ================= + + +Command Read/Write +------------------ +To read/write to RAM, need to send a commands to the device. + +The command format is as below. + +DataByte(SET_REPORT) + +===== ====================== +Byte1 Command Byte +Byte2 Address - Byte 0 (LSB) +Byte3 Address - Byte 1 +Byte4 Address - Byte 2 +Byte5 Address - Byte 3 (MSB) +Byte6 Value Byte +Byte7 Checksum +===== ====================== + +Command Byte is read=0xD1/write=0xD2 . + +Address is read/write RAM address. + +Value Byte is writing data when you send the write commands. + +When you read RAM, there is no meaning. + +DataByte(GET_REPORT) + +===== ====================== +Byte1 Response Byte +Byte2 Address - Byte 0 (LSB) +Byte3 Address - Byte 1 +Byte4 Address - Byte 2 +Byte5 Address - Byte 3 (MSB) +Byte6 Value Byte +Byte7 Checksum +===== ====================== + +Read value is stored in Value Byte. + + +Packet Format +Touchpad data byte +------------------ + + +======= ======= ======= ======= ======= ======= ======= ======= ===== +- b7 b6 b5 b4 b3 b2 b1 b0 +======= ======= ======= ======= ======= ======= ======= ======= ===== +1 0 0 SW6 SW5 SW4 SW3 SW2 SW1 +2 0 0 0 Fcv Fn3 Fn2 Fn1 Fn0 +3 Xa0_7 Xa0_6 Xa0_5 Xa0_4 Xa0_3 Xa0_2 Xa0_1 Xa0_0 +4 Xa0_15 Xa0_14 Xa0_13 Xa0_12 Xa0_11 Xa0_10 Xa0_9 Xa0_8 +5 Ya0_7 Ya0_6 Ya0_5 Ya0_4 Ya0_3 Ya0_2 Ya0_1 Ya0_0 +6 Ya0_15 Ya0_14 Ya0_13 Ya0_12 Ya0_11 Ya0_10 Ya0_9 Ya0_8 +7 LFB0 Zs0_6 Zs0_5 Zs0_4 Zs0_3 Zs0_2 Zs0_1 Zs0_0 + +8 Xa1_7 Xa1_6 Xa1_5 Xa1_4 Xa1_3 Xa1_2 Xa1_1 Xa1_0 +9 Xa1_15 Xa1_14 Xa1_13 Xa1_12 Xa1_11 Xa1_10 Xa1_9 Xa1_8 +10 Ya1_7 Ya1_6 Ya1_5 Ya1_4 Ya1_3 Ya1_2 Ya1_1 Ya1_0 +11 Ya1_15 Ya1_14 Ya1_13 Ya1_12 Ya1_11 Ya1_10 Ya1_9 Ya1_8 +12 LFB1 Zs1_6 Zs1_5 Zs1_4 Zs1_3 Zs1_2 Zs1_1 Zs1_0 + +13 Xa2_7 Xa2_6 Xa2_5 Xa2_4 Xa2_3 Xa2_2 Xa2_1 Xa2_0 +14 Xa2_15 Xa2_14 Xa2_13 Xa2_12 Xa2_11 Xa2_10 Xa2_9 Xa2_8 +15 Ya2_7 Ya2_6 Ya2_5 Ya2_4 Ya2_3 Ya2_2 Ya2_1 Ya2_0 +16 Ya2_15 Ya2_14 Ya2_13 Ya2_12 Ya2_11 Ya2_10 Ya2_9 Ya2_8 +17 LFB2 Zs2_6 Zs2_5 Zs2_4 Zs2_3 Zs2_2 Zs2_1 Zs2_0 + +18 Xa3_7 Xa3_6 Xa3_5 Xa3_4 Xa3_3 Xa3_2 Xa3_1 Xa3_0 +19 Xa3_15 Xa3_14 Xa3_13 Xa3_12 Xa3_11 Xa3_10 Xa3_9 Xa3_8 +20 Ya3_7 Ya3_6 Ya3_5 Ya3_4 Ya3_3 Ya3_2 Ya3_1 Ya3_0 +21 Ya3_15 Ya3_14 Ya3_13 Ya3_12 Ya3_11 Ya3_10 Ya3_9 Ya3_8 +22 LFB3 Zs3_6 Zs3_5 Zs3_4 Zs3_3 Zs3_2 Zs3_1 Zs3_0 + +23 Xa4_7 Xa4_6 Xa4_5 Xa4_4 Xa4_3 Xa4_2 Xa4_1 Xa4_0 +24 Xa4_15 Xa4_14 Xa4_13 Xa4_12 Xa4_11 Xa4_10 Xa4_9 Xa4_8 +25 Ya4_7 Ya4_6 Ya4_5 Ya4_4 Ya4_3 Ya4_2 Ya4_1 Ya4_0 +26 Ya4_15 Ya4_14 Ya4_13 Ya4_12 Ya4_11 Ya4_10 Ya4_9 Ya4_8 +27 LFB4 Zs4_6 Zs4_5 Zs4_4 Zs4_3 Zs4_2 Zs4_1 Zs4_0 +======= ======= ======= ======= ======= ======= ======= ======= ===== + + +SW1-SW6: + SW ON/OFF status +Xan_15-0(16bit): + X Absolute data of the "n"th finger +Yan_15-0(16bit): + Y Absolute data of the "n"th finger +Zsn_6-0(7bit): + Operation area of the "n"th finger + + +StickPointer data byte +---------------------- + +======= ======= ======= ======= ======= ======= ======= ======= ===== +- b7 b6 b5 b4 b3 b2 b1 b0 +======= ======= ======= ======= ======= ======= ======= ======= ===== +Byte1 1 1 1 0 1 SW3 SW2 SW1 +Byte2 X7 X6 X5 X4 X3 X2 X1 X0 +Byte3 X15 X14 X13 X12 X11 X10 X9 X8 +Byte4 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 +Byte5 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8 +Byte6 Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0 +Byte7 T&P Z14 Z13 Z12 Z11 Z10 Z9 Z8 +======= ======= ======= ======= ======= ======= ======= ======= ===== + +SW1-SW3: + SW ON/OFF status +Xn_15-0(16bit): + X Absolute data +Yn_15-0(16bit): + Y Absolute data +Zn_14-0(15bit): + Z |