Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm, I think I've got one later
  driver pull for mediatek SoC driver, I'm undecided on if it needs to
  go to you yet.

  Otherwise summary below:

  Core drm:
   - Atomic add driver private objects
   - Deprecate preclose hook in modern drivers
   - MST bandwidth tracking
   - Use kvmalloc in more places
   - Add mode_valid hook for crtc/encoder/bridge
   - Reduce sync_file construction time
   - Documentation updates
   - New DRM synchronisation object support

  New drivers:
   - pl111 - pl111 CLCD display controller

  Panel:
   - Innolux P079ZCA panel driver
   - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
   - panel-samsung-s6e3ha2: Add s6e3hf2 panel support

  i915:
   - SKL+ watermark fixes
   - G4x/G33 reset improvements
   - DP AUX backlight improvements
   - Buffer based GuC/host communication
   - New getparam for (sub)slice infomation
   - Cannonlake and Coffeelake initial patches
   - Execbuf optimisations

  radeon/amdgpu:
   - Lots of Vega10 bug fixes
   - Preliminary raven support
   - KIQ support for compute rings
   - MEC queue management rework
   - DCE6 Audio support
   - SR-IOV improvements
   - Better radeon/amdgpu selection support

  nouveau:
   - HDMI stereoscopic support
   - Display code rework for >= GM20x GPUs

  msm:
   - GEM rework for fine-grained locking
   - Per-process pagetable work
   - HDMI fixes for Snapdragon 820.

  vc4:
   - Remove 256MB CMA limit from vc4
   - Add out-fence support
   - Add support for cygnus
   - Get/set tiling ioctls support
   - Add T-format tiling support for scanout

  zte:
   - add VGA support.

  etnaviv:
   - Thermal throttle support for newer GPUs
   - Restore userspace buffer cache performance
   - dma-buf sync fix

  stm:
   - add stm32f429 display support

  exynos:
   - Rework vblank handling
   - Fixup sw-trigger code

  sun4i:
   - V3s display engine support
   - HDMI support for older SoCs
   - Preliminary work on dual-pipeline SoCs.

  rcar-du:
   - VSP work

  imx-drm:
   - Remove counter load enable from PRE
   - Double read/write reduction flag support

  tegra:
   - Documentation for the host1x and drm driver.
   - Lots of staging ioctl fixes due to grate project work.

  omapdrm:
   - dma-buf fence support
   - TILER rotation fixes"

* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
  drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  ...

8 files changed, 218 insertions, 69 deletions

diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst
index babfb6143bd9..0d936c67bf7d 100644
--- a/Documentation/gpu/drm-internals.rst
+++ b/Documentation/gpu/drm-internals.rst
@@ -98,6 +98,9 @@ DRIVER_ATOMIC
     implement appropriate obj->atomic_get_property() vfuncs for any
     modeset objects with driver specific properties.
 
+DRIVER_SYNCOBJ
+    Driver support drm sync objects.
+
 Major, Minor and Patchlevel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -149,60 +152,15 @@ Device Instance and Driver Handling
 Driver Load
 -----------
 
-IRQ Registration
-~~~~~~~~~~~~~~~~
-
-The DRM core tries to facilitate IRQ handler registration and
-unregistration by providing :c:func:`drm_irq_install()` and
-:c:func:`drm_irq_uninstall()` functions. Those functions only
-support a single interrupt per device, devices that use more than one
-IRQs need to be handled manually.
-
-Managed IRQ Registration
-''''''''''''''''''''''''
-
-:c:func:`drm_irq_install()` starts by calling the irq_preinstall
-driver operation. The operation is optional and must make sure that the
-interrupt will not get fired by clearing all pending interrupt flags or
-disabling the interrupt.
-
-The passed-in IRQ will then be requested by a call to
-:c:func:`request_irq()`. If the DRIVER_IRQ_SHARED driver feature
-flag is set, a shared (IRQF_SHARED) IRQ handler will be requested.
-
-The IRQ handler function must be provided as the mandatory irq_handler
-driver operation. It will get passed directly to
-:c:func:`request_irq()` and thus has the same prototype as all IRQ
-handlers. It will get called with a pointer to the DRM device as the
-second argument.
-
-Finally the function calls the optional irq_postinstall driver
-operation. The operation usually enables interrupts (excluding the
-vblank interrupt, which is enabled separately), but drivers may choose
-to enable/disable interrupts at a different time.
-
-:c:func:`drm_irq_uninstall()` is similarly used to uninstall an
-IRQ handler. It starts by waking up all processes waiting on a vblank
-interrupt to make sure they don't hang, and then calls the optional
-irq_uninstall driver operation. The operation must disable all hardware
-interrupts. Finally the function frees the IRQ by calling
-:c:func:`free_irq()`.
-
-Manual IRQ Registration
-'''''''''''''''''''''''
-
-Drivers that require multiple interrupt handlers can't use the managed
-IRQ registration functions. In that case IRQs must be registered and
-unregistered manually (usually with the :c:func:`request_irq()` and
-:c:func:`free_irq()` functions, or their :c:func:`devm_request_irq()` and
-:c:func:`devm_free_irq()` equivalents).
-
-When manually registering IRQs, drivers must not set the
-DRIVER_HAVE_IRQ driver feature flag, and must not provide the
-irq_handler driver operation. They must set the :c:type:`struct
-drm_device <drm_device>` irq_enabled field to 1 upon
-registration of the IRQs, and clear it to 0 after unregistering the
-IRQs.
+
+IRQ Helper Library
+~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/drm_irq.c
+   :doc: irq helpers
+
+.. kernel-doc:: drivers/gpu/drm/drm_irq.c
+   :export:
 
 Memory Manager Initialization
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
index c075aadd7078..7c5e2549a58a 100644
--- a/Documentation/gpu/drm-kms-helpers.rst
+++ b/Documentation/gpu/drm-kms-helpers.rst
@@ -143,6 +143,12 @@ Bridge Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_bridge.c
    :export:
 
+Panel-Bridge Helper Reference
+-----------------------------
+
+.. kernel-doc:: drivers/gpu/drm/bridge/panel.c
+   :export:
+
 .. _drm_panel_helper:
 
 Panel Helper Reference
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index bfecd21a8cdf..2d77c9580164 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -612,8 +612,8 @@ operation handler.
 Vertical Blanking and Interrupt Handling Functions Reference
 ------------------------------------------------------------
 
-.. kernel-doc:: include/drm/drm_irq.h
+.. kernel-doc:: include/drm/drm_vblank.h
    :internal:
 
-.. kernel-doc:: drivers/gpu/drm/drm_irq.c
+.. kernel-doc:: drivers/gpu/drm/drm_vblank.c
    :export:
diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst
index 96b9c34c21e4..9412798645c1 100644
--- a/Documentation/gpu/drm-mm.rst
+++ b/Documentation/gpu/drm-mm.rst
@@ -484,3 +484,15 @@ DRM Cache Handling
 
 .. kernel-doc:: drivers/gpu/drm/drm_cache.c
    :export:
+
+DRM Sync Objects
+===========================
+
+.. kernel-doc:: drivers/gpu/drm/drm_syncobj.c
+   :doc: Overview
+
+.. kernel-doc:: include/drm/drm_syncobj.h
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/drm_syncobj.c
+   :export:
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst
index c572f092739e..35d673bf9b56 100644
--- a/Documentation/gpu/index.rst
+++ b/Documentation/gpu/index.rst
@@ -12,6 +12,8 @@ Linux GPU Driver Developer's Guide
    drm-uapi
    i915
    meson
+   pl111
+   tegra
    tinydrm
    vc4
    vga-switcheroo
diff --git a/Documentation/gpu/pl111.rst b/Documentation/gpu/pl111.rst
new file mode 100644
index 000000000000..9b03736d33dd
--- /dev/null
+++ b/Documentation/gpu/pl111.rst
@@ -0,0 +1,6 @@
+==========================================
+ drm/pl111 ARM PrimeCell PL111 CLCD Driver
+==========================================
+
+.. kernel-doc:: drivers/gpu/drm/pl111/pl111_drv.c
+   :doc: ARM PrimeCell PL111 CLCD Driver
diff --git a/Documentation/gpu/tegra.rst b/Documentation/gpu/tegra.rst
new file mode 100644
index 000000000000..d2ed8938ca43
--- /dev/null
+++ b/Documentation/gpu/tegra.rst
@@ -0,0 +1,178 @@
+===============================================
+ drm/tegra NVIDIA Tegra GPU and display driver
+===============================================
+
+NVIDIA Tegra SoCs support a set of display, graphics and video functions via
+the host1x controller. host1x supplies command streams, gathered from a push
+buffer provided directly by the CPU, to its clients via channels. Software,
+or blocks amongst themselves, can use syncpoints for synchronization.
+
+Up until, but not including, Tegra124 (aka Tegra K1) the drm/tegra driver
+supports the built-in GPU, comprised of the gr2d and gr3d engines. Starting
+with Tegra124 the GPU is based on the NVIDIA desktop GPU architecture and
+supported by the drm/nouveau driver.
+
+The drm/tegra driver supports NVIDIA Tegra SoC generations since Tegra20. It
+has three parts:
+
+  - A host1x driver that provides infrastructure and access to the host1x
+    services.
+
+  - A KMS driver that supports the display controllers as well as a number of
+    outputs, such as RGB, HDMI, DSI, and DisplayPort.
+
+  - A set of custom userspace IOCTLs that can be used to submit jobs to the
+    GPU and video engines via host1x.
+
+Driver Infrastructure
+=====================
+
+The various host1x clients need to be bound together into a logical device in
+order to expose their functionality to users. The infrastructure that supports
+this is implemented in the host1x driver. When a driver is registered with the
+infrastructure it provides a list of compatible strings specifying the devices
+that it needs. The infrastructure creates a logical device and scan the device
+tree for matching device nodes, adding the required clients to a list. Drivers
+for individual clients register with the infrastructure as well and are added
+to the logical host1x device.
+
+Once all clients are available, the infrastructure will initialize the logical
+device using a driver-provided function which will set up the bits specific to
+the subsystem and in turn initialize each of its clients.
+
+Similarly, when one of the clients is unregistered, the infrastructure will
+destroy the logical device by calling back into the driver, which ensures that
+the subsystem specific bits are torn down and the clients destroyed in turn.
+
+Host1x Infrastructure Reference
+-------------------------------
+
+.. kernel-doc:: include/linux/host1x.h
+
+.. kernel-doc:: drivers/gpu/host1x/bus.c
+   :export:
+
+Host1x Syncpoint Reference
+--------------------------
+
+.. kernel-doc:: drivers/gpu/host1x/syncpt.c
+   :export:
+
+KMS driver
+==========
+
+The display hardware has remained mostly backwards compatible over the various
+Tegra SoC generations, up until Tegra186 which introduces several changes that
+make it difficult to support with a parameterized driver.
+
+Display Controllers
+-------------------
+
+Tegra SoCs have two display controllers, each of which can be associated with
+zero or more outputs. Outputs can also share a single display controller, but
+only if they run with compatible display timings. Two display controllers can
+also share a single framebuffer, allowing cloned configurations even if modes
+on two outputs don't match. A display controller is modelled as a CRTC in KMS
+terms.
+
+On Tegra186, the number of display controllers has been increased to three. A
+display controller can no longer drive all of the outputs. While two of these
+controllers can drive both DSI outputs and both SOR outputs, the third cannot
+drive any DSI.
+
+Windows
+~~~~~~~
+
+A display controller controls a set of windows that can be used to composite
+multiple buffers onto the screen. While it is possible to assign arbitrary Z
+ordering to individual windows (by programming the corresponding blending
+registers), this is currently not supported by the driver. Instead, it will
+assume a fixed Z ordering of the windows (window A is the root window, that
+is, the lowest, while windows B and C are overlaid on top of window A). The
+overlay windows support multiple pixel formats and can automatically convert
+from YUV to RGB at scanout time. This makes them useful for displaying video
+content. In KMS, each window is modelled as a plane. Each display controller
+has a hardware cursor that is exposed as a cursor plane.
+
+Outputs
+-------
+
+The type and number of supported outputs varies between Tegra SoC generations.
+All generations support at least HDMI. While earlier generations supported the
+very simple RGB interfaces (one per display controller), recent generations no
+longer do and instead provide standard interfaces such as DSI and eDP/DP.
+
+Outputs are modelled as a composite encoder/connector pair.
+
+RGB/LVDS
+~~~~~~~~
+
+This interface is no longer available since Tegra124. It has been replaced by
+the more standard DSI and eDP interfaces.
+
+HDMI
+~~~~
+
+HDMI is supported on all Tegra SoCs. Starting with Tegra210, HDMI is provided
+by the versatile SOR output, which supports eDP, DP and HDMI. The SOR is able
+to support HDMI 2.0, though support for this is currently not merged.
+
+DSI
+~~~
+
+Although Tegra has supported DSI since Tegra30, the controller has changed in
+several ways in Tegra114. Since none of the publicly available development
+boards prior to Dalmore (Tegra114) have made use of DSI, only Tegra114 and
+later are supported by the drm/tegra driver.
+
+eDP/DP
+~~~~~~
+
+eDP was first introduced in Tegra124 where it was used to drive the display
+panel for notebook form factors. Tegra210 added support for full DisplayPort
+support, though this is currently not implemented in the drm/tegra driver.
+
+Userspace Interface
+===================
+
+The userspace interface provided by drm/tegra allows applications to create
+GEM buffers, access and control syncpoints as well as submit command streams
+to host1x.
+
+GEM Buffers
+-----------
+
+The ``DRM_IOCTL_TEGRA_GEM_CREATE`` IOCTL is used to create a GEM buffer object
+with Tegra-specific flags. This is useful for buffers that should be tiled, or
+that are to be scanned out upside down (useful for 3D content).
+
+After a GEM buffer object has been created, its memory can be mapped by an
+application using the mmap offset returned by the ``DRM_IOCTL_TEGRA_GEM_MMAP``
+IOCTL.
+
+Syncpoints
+----------
+
+The current value of a syncpoint can be obtained by executing the
+``DRM_IOCTL_TEGRA_SYNCPT_READ`` IOCTL. Incrementing the syncpoint is achieved
+using the ``DRM_IOCTL_TEGRA_SYNCPT_INCR`` IOCTL.
+
+Userspace can also request blocking on a syncpoint. To do so, it needs to
+execute the ``DRM_IOCTL_TEGRA_SYNCPT_WAIT`` IOCTL, specifying the value of
+the syncpoint to wait for. The kernel will release the application when the
+syncpoint reaches that value or after a specified timeout.
+
+Command Stream Submission
+-------------------------
+
+Before an application can submit command streams to host1x it needs to open a
+channel to an engine using the ``DRM_IOCTL_TEGRA_OPEN_CHANNEL`` IOCTL. Client
+IDs are used to identify the target of the channel. When a channel is no
+longer needed, it can be closed using the ``DRM_IOCTL_TEGRA_CLOSE_CHANNEL``
+IOCTL. To retrieve the syncpoint associated with a channel, an application
+can use the ``DRM_IOCTL_TEGRA_GET_SYNCPT``.
+
+After opening a channel, submitting command streams is easy. The application
+writes commands into the memory backing a GEM buffer object and passes these
+to the ``DRM_IOCTL_TEGRA_SUBMIT`` IOCTL along with various other parameters,
+such as the syncpoints or relocations used in the job submission.
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 6162d0e9dc28..1ae42006deea 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -177,19 +177,6 @@ following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and
 
 Contact: Daniel Vetter, respective driver maintainers
 
-Switch to drm_connector_list_iter for any connector_list walking
-----------------------------------------------------------------
-
-Connectors can be hotplugged, and we now have a special list of helpers to walk
-the connector_list in a race-free fashion, without incurring deadlocks on
-mutexes and other fun stuff.
-
-Unfortunately most drivers are not converted yet. At least all those supporting
-DP MST hotplug should be converted, since for those drivers the difference
-matters. See drm_for_each_connector_iter() vs. drm_for_each_connector().
-
-Contact: Daniel Vetter
-
 Core refactorings
 =================