docs: fb: convert docs to ReST and rename to *.rst

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Also, removed the Maintained by, as requested by Geert.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

1 files changed, 0 insertions, 278 deletions

diff --git a/Documentation/fb/intel810.txt b/Documentation/fb/intel810.txt
deleted file mode 100644
index a8e9f5bca6f3..000000000000
--- a/Documentation/fb/intel810.txt
+++ /dev/null
@@ -1,278 +0,0 @@
-Intel 810/815 Framebuffer driver
- 	Tony Daplas <adaplas@pol.net>
-	http://i810fb.sourceforge.net
-
-	March 17, 2002
-
-	First Released: July 2001
-	Last Update:    September 12, 2005
-================================================================
-
-A. Introduction
-
-	This is a framebuffer driver for various Intel 810/815 compatible
-	graphics devices.  These include:
-
-	Intel 810
-	Intel 810E
-	Intel 810-DC100
-	Intel 815 Internal graphics only, 100Mhz FSB
-	Intel 815 Internal graphics only
-	Intel 815 Internal graphics and AGP
-
-B.  Features
-
-	- Choice of using Discrete Video Timings, VESA Generalized Timing
-	  Formula, or a framebuffer specific database to set the video mode
-
-	- Supports a variable range of horizontal and vertical resolution and
-	  vertical refresh rates if the VESA Generalized Timing Formula is
-	  enabled.
-
-	- Supports color depths of 8, 16, 24 and 32 bits per pixel
-
-	- Supports pseudocolor, directcolor, or truecolor visuals
-
-	- Full and optimized hardware acceleration at 8, 16 and 24 bpp
-
-	- Robust video state save and restore
-
-	- MTRR support
-
-	- Utilizes user-entered monitor specifications to automatically
-	  calculate required video mode parameters.
-
-	- Can concurrently run with xfree86 running with native i810 drivers
-
-	- Hardware Cursor Support
- 
-	- Supports EDID probing either by DDC/I2C or through the BIOS
-
-C.  List of available options
-
-   a. "video=i810fb"
-	enables the i810 driver
-
-	Recommendation: required
-
-   b. "xres:<value>"
-	select horizontal resolution in pixels. (This parameter will be
-	ignored if 'mode_option' is specified.  See 'o' below).
-
-	Recommendation: user preference
-	(default = 640)
-
-   c. "yres:<value>"
-	select vertical resolution in scanlines. If Discrete Video Timings
-	is enabled, this will be ignored and computed as 3*xres/4.  (This
-	parameter will be ignored if 'mode_option' is specified.  See 'o'
-	below)
-
-	Recommendation: user preference
-	(default = 480)
-
-   d. "vyres:<value>"
-	select virtual vertical resolution in scanlines. If (0) or none
-	is specified, this will be computed against maximum available memory.
-
-	Recommendation: do not set
-	(default = 480)
-
-   e. "vram:<value>"
-	select amount of system RAM in MB to allocate for the video memory
-
-	Recommendation: 1 - 4 MB.
-	(default = 4)
-
-   f. "bpp:<value>"
-	select desired pixel depth
-
-	Recommendation: 8
-	(default = 8)
-
-   g. "hsync1/hsync2:<value>"
-	select the minimum and maximum Horizontal Sync Frequency of the
-	monitor in kHz.  If using a fixed frequency monitor, hsync1 must
-	be equal to hsync2. If EDID probing is successful, these will be
-	ignored and values will be taken from the EDID block.
-
-	Recommendation: check monitor manual for correct values
-	(default = 29/30)
-
-   h. "vsync1/vsync2:<value>"
-	select the minimum and maximum Vertical Sync Frequency of the monitor
-	in Hz. You can also use this option to lock your monitor's refresh
-	rate. If EDID probing is successful, these will be ignored and values
-	will be taken from the EDID block.
-
-	Recommendation: check monitor manual for correct values
-	(default = 60/60)
-
-	IMPORTANT:  If you need to clamp your timings, try to give some
-	leeway for computational errors (over/underflows).  Example: if
-	using vsync1/vsync2 = 60/60, make sure hsync1/hsync2 has at least
-	a 1 unit difference, and vice versa.
-
-   i. "voffset:<value>"
-	select at what offset in MB of the logical memory to allocate the
-	framebuffer memory.  The intent is to avoid the memory blocks
-	used by standard graphics applications (XFree86).  The default
-	offset (16 MB for a 64 MB aperture, 8 MB for a 32 MB aperture) will
-	avoid XFree86's usage and allows up to 7 MB/15 MB of framebuffer
-	memory.  Depending on your usage, adjust the value up or down
-	(0 for maximum usage, 31/63 MB for the least amount).  Note, an
-	arbitrary setting may conflict with XFree86.
-
-	Recommendation: do not set
-	(default = 8 or 16 MB)
-
-   j. "accel"
-	enable text acceleration.  This can be enabled/reenabled anytime
-	by using 'fbset -accel true/false'.
-
-	Recommendation: enable
-	(default = not set)
-
-   k. "mtrr"
-	enable MTRR.  This allows data transfers to the framebuffer memory
-	to occur in bursts which can significantly increase performance.
-	Not very helpful with the i810/i815 because of 'shared memory'.
-
-	Recommendation: do not set
-	(default = not set)
-
-   l. "extvga"
-	if specified, secondary/external VGA output will always be enabled.
-	Useful if the BIOS turns off the VGA port when no monitor is attached.
-	The external VGA monitor can then be attached without rebooting.
-
-	Recommendation: do not set
-	(default = not set)
-
-   m. "sync"
-	Forces the hardware engine to do a "sync" or wait for the hardware
-	to finish before starting another instruction. This will produce a
-	more stable setup, but will be slower.
-
-	Recommendation: do not set
-	(default = not set)
-
-   n. "dcolor"
-        Use directcolor visual instead of truecolor for pixel depths greater
-	than 8 bpp.  Useful for color tuning, such as gamma control.
-
-	Recommendation: do not set
-	(default = not set)
-
-   o. <xres>x<yres>[-<bpp>][@<refresh>]
-	The driver will now accept specification of boot mode option.  If this
-	is specified, the options 'xres' and 'yres' will be ignored. See
-	Documentation/fb/modedb.txt for usage.
-
-D. Kernel booting
-
-Separate each option/option-pair by commas (,) and the option from its value
-with a colon (:) as in the following:
-
-video=i810fb:option1,option2:value2
-
-Sample Usage
-------------
-
-In /etc/lilo.conf, add the line:
-
-append="video=i810fb:vram:2,xres:1024,yres:768,bpp:8,hsync1:30,hsync2:55, \
-        vsync1:50,vsync2:85,accel,mtrr"
-
-This will initialize the framebuffer to 1024x768 at 8bpp.  The framebuffer
-will use 2 MB of System RAM. MTRR support will be enabled. The refresh rate
-will be computed based on the hsync1/hsync2 and vsync1/vsync2 values.
-
-IMPORTANT:
-You must include hsync1, hsync2, vsync1 and vsync2 to enable video modes
-better than 640x480 at 60Hz. HOWEVER, if your chipset/display combination
-supports I2C and has an EDID block, you can safely exclude hsync1, hsync2,
-vsync1 and vsync2 parameters.  These parameters will be taken from the EDID
-block.
-
-E.  Module options
-
-The module parameters are essentially similar to the kernel
-parameters. The main difference is that you need to include a Boolean value
-(1 for TRUE, and 0 for FALSE) for those options which don't need a value.
-
-Example, to enable MTRR, include "mtrr=1".
-
-Sample Usage
-------------
-
-Using the same setup as described above, load the module like this:
-
-	modprobe i810fb vram=2 xres=1024 bpp=8 hsync1=30 hsync2=55 vsync1=50 \
-	         vsync2=85 accel=1 mtrr=1
-
-Or just add the following to a configuration file in /etc/modprobe.d/
-
-	options i810fb vram=2 xres=1024 bpp=16 hsync1=30 hsync2=55 vsync1=50 \
-	vsync2=85 accel=1 mtrr=1
-
-and just do a
-
-	modprobe i810fb
-
-
-F.  Setup
-
-	a. Do your usual method of configuring the kernel.
-
-	make menuconfig/xconfig/config
-
-	b. Under "Code maturity level options" enable "Prompt for development
-	   and/or incomplete code/drivers".
-
- 	c. Enable agpgart support for the Intel 810/815 on-board graphics.
-	   This is required.  The option is under "Character Devices".
-
-	d. Under "Graphics Support", select "Intel 810/815" either statically
-	   or as a module.  Choose "use VESA Generalized Timing Formula" if
-	   you need to maximize the capability of your display.  To be on the
-	   safe side, you can leave this unselected.
-
-	e. If you want support for DDC/I2C probing (Plug and Play Displays),
-	   set 'Enable DDC Support' to 'y'. To make this option appear, set
-	   'use VESA Generalized Timing Formula' to 'y'.
-
-        f. If you want a framebuffer console, enable it under "Console
-	   Drivers".
-
-	g. Compile your kernel.
-
-	h. Load the driver as described in sections D and E.
-
-	i.  Try the DirectFB (http://www.directfb.org) + the i810 gfxdriver
-	    patch to see the chipset in action (or inaction :-).
-
-G.  Acknowledgment:
-
-	1.  Geert Uytterhoeven - his excellent howto and the virtual
-	    framebuffer driver code made this possible.
-
-	2.  Jeff Hartmann for his agpgart code.
-
-	3.  The X developers.  Insights were provided just by reading the
-	    XFree86 source code.
-
-	4.  Intel(c).  For this value-oriented chipset driver and for
-	    providing documentation.
-
-	5. Matt Sottek.  His inputs and ideas  helped in making some
-	   optimizations possible.
-
-H.  Home Page:
-
-	A more complete, and probably updated information is provided at
-	http://i810fb.sourceforge.net.
-
-###########################
-Tony
-