[media] doc-rst: move DVB avulse docs to Documentation/media

There are several documentation stuff under Documentation/dvb.

Move them to Documentation/media/dvb-drivers and rename them to
rst, as they'll soon be converted to rst files.

No changes at the documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 0 insertions, 159 deletions

diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
deleted file mode 100644
index a0be92012877..000000000000
--- a/Documentation/dvb/faq.txt
+++ /dev/null
@@ -1,159 +0,0 @@
-Some very frequently asked questions about linuxtv-dvb
-
-1. The signal seems to die a few seconds after tuning.
-
-	It's not a bug, it's a feature. Because the frontends have
-	significant power requirements (and hence get very hot), they
-	are powered down if they are unused (i.e. if the frontend device
-	is closed). The dvb-core.o module parameter "dvb_shutdown_timeout"
-	allow you to change the timeout (default 5 seconds). Setting the
-	timeout to 0 disables the timeout feature.
-
-2. How can I watch TV?
-
-	The driver distribution includes some simple utilities which
-	are mainly intended for testing and to demonstrate how the
-	DVB API works.
-
-	Depending on whether you have a DVB-S, DVB-C or DVB-T card, use
-	apps/szap/szap, czap or tzap. You must supply a channel list
-	in ~/.[sct]zap/channels.conf. If you are lucky you can just copy
-	one of the supplied channel lists, or you can create a new one
-	by running apps/scan/scan. If you run scan on an unknown network
-	you might have to supply some start data in apps/scan/initial.h.
-
-	If you have a card with a built-in hardware MPEG-decoder the
-	drivers create a video4linux device (/dev/v4l/video0) which
-	you can use to watch TV with any v4l application. xawtv is known
-	to work. Note that you cannot change channels with xawtv, you
-	have to zap using [sct]zap. If you want a nice application for
-	TV watching and record/playback, have a look at VDR.
-
-	If your card does not have a hardware MPEG decoder you need
-	a software MPEG decoder. Mplayer or xine are known to work.
-	Newsflash: MythTV also has DVB support now.
-	Note: Only very recent versions of Mplayer and xine can decode.
-	MPEG2 transport streams (TS) directly. Then, run
-	'[sct]zap channelname -r' in one xterm, and keep it running,
-	and start 'mplayer - < /dev/dvb/adapter0/dvr0' or
-	'xine stdin://mpeg2 < /dev/dvb/adapter0/dvr0' in a second xterm.
-	That's all far from perfect, but it seems no one has written
-	a nice DVB application which includes a builtin software MPEG
-	decoder yet.
-
-	Newsflash: Newest xine directly supports DVB. Just copy your
-	channels.conf to ~/.xine and start 'xine dvb://', or select
-	the DVB button in the xine GUI. Channel switching works using the
-	numpad pgup/pgdown (NP9 / NP3) keys to scroll through the channel osd
-	menu and pressing numpad-enter to switch to the selected channel.
-
-	Note: Older versions of xine and mplayer understand MPEG program
-	streams (PS) only, and can be used in conjunction with the
-	ts2ps tool from the Metzler Brother's dvb-mpegtools package.
-
-3. Which other DVB applications exist?
-
-	http://www.cadsoft.de/people/kls/vdr/
-		Klaus Schmidinger's Video Disk Recorder
-
-	http://www.metzlerbros.org/dvb/
-		Metzler Bros. DVB development; alternate drivers and
-		DVB utilities, include dvb-mpegtools and tuxzap.
-
-	http://sourceforge.net/projects/dvbtools/
-		Dave Chapman's dvbtools package, including
-		dvbstream and dvbtune
-
-	http://www.linuxdvb.tv/
-		Henning Holtschneider's site with many interesting
-		links and docs
-
-	http://www.dbox2.info/
-		LinuxDVB on the dBox2
-
-	http://www.tuxbox.org/
-	http://cvs.tuxbox.org/
-		the TuxBox CVS many interesting DVB applications and the dBox2
-		DVB source
-
-	https://linuxtv.org/downloads
-		DVB Swiss Army Knife library and utilities
-
-	http://www.nenie.org/misc/mpsys/
-		MPSYS: a MPEG2 system library and tools
-
-	http://mplayerhq.hu/
-		mplayer
-
-	http://xine.sourceforge.net/
-	http://xinehq.de/
-		xine
-
-	http://www.mythtv.org/
-		MythTV - analog TV PVR, but now with DVB support, too
-		(with software MPEG decode)
-
-	http://dvbsnoop.sourceforge.net/
-		DVB sniffer program to monitor, analyze, debug, dump
-		or view dvb/mpeg/dsm-cc/mhp stream information (TS,
-		PES, SECTION)
-
-4. Can't get a signal tuned correctly
-
-	If you are using a Technotrend/Hauppauge DVB-C card *without* analog
-	module, you might have to use module parameter adac=-1 (dvb-ttpci.o).
-
-5. The dvb_net device doesn't give me any packets at all
-
-	Run tcpdump on the dvb0_0 interface. This sets the interface
-	into promiscuous mode so it accepts any packets from the PID
-	you have configured with the dvbnet utility. Check if there
-	are any packets with the IP addr and MAC addr you have
-	configured with ifconfig.
-
-	If tcpdump doesn't give you any output, check the statistics
-	which ifconfig outputs. (Note: If the MAC address is wrong,
-	dvb_net won't get any input; thus you have to run tcpdump
-	before checking the statistics.) If there are no packets at
-	all then maybe the PID is wrong. If there are error packets,
-	then either the PID is wrong or the stream does not conform to
-	the MPE standard (EN 301 192, http://www.etsi.org/). You can
-	use e.g. dvbsnoop for debugging.
-
-6. The dvb_net device doesn't give me any multicast packets
-
-	Check your routes if they include the multicast address range.
-	Additionally make sure that "source validation by reversed path
-	lookup" is disabled:
-	  $ "echo 0 > /proc/sys/net/ipv4/conf/dvb0/rp_filter"
-
-7. What the hell are all those modules that need to be loaded?
-
-	For a dvb-ttpci av7110 based full-featured card the following
-	modules are loaded:
-
-	- videodev: Video4Linux core module. This is the base module that
-	  gives you access to the "analog" tv picture of the av7110 mpeg2
-	  decoder.
-
-	- v4l2-common: common functions for Video4Linux-2 drivers
-
-	- v4l1-compat: backward compatibility layer for Video4Linux-1 legacy
-	  applications
-
-	- dvb-core: DVB core module. This provides you with the
-	  /dev/dvb/adapter entries
-
-	- saa7146: SAA7146 core driver. This is need to access any SAA7146
-	  based card in your system.
-
-	- saa7146_vv: SAA7146 video and vbi functions. These are only needed
-	  for full-featured cards.
-
-	- videobuf-dma-sg: capture helper module for the saa7146_vv driver. This
-	  one is responsible to handle capture buffers.
-
-	- dvb-ttpci: The main driver for AV7110 based, full-featured
-	  DVB-S/C/T cards
-
-eof