Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks
   - Make better attempt at matching device with the correct OF node
   - Allow batch removal of hierarchical sub-devices

  New Drivers
   - Add STM32 Clocksource driver
   - Add support for Khadas System Control Microcontroller

  Driver Removal
   - Remove unused driver for TI's SMSC ECE1099

  New Device Support
   - Add support for Intel Emmitsburg PCH to Intel LPSS PCI
   - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
   - Add support for Dialog DA revision to Dialog DA9063

  New Functionality
   - Add support for AXP803 to be probed by I2C

  Fix-ups
   - Numerous W=1 warning fixes
   - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
   - Enabled Regmap 'fast I/O' in stm32-lptimer
   - Change BUG_ON to WARN_ON in arizona-core
   - Remove superfluous code/initialisation (madera, max14577)
   - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
   - Switch to of_platform_populate() in sprd-sc27xx-spi
   - Expand out set/get brightness/pwm macros in lm3533-ctrlbank
   - Disable IRQs on suspend in motorola-cpcap
   - Clean-up error handling in intel_soc_pmic_mrfld
   - Ensure correct removal order of sub-devices in madera
   - Many s/HTTP/HTTPS/ link changes
   - Ensure name used with Regmap is unique in syscon

  Bug Fixes
   - Properly 'put' clock on unbind and error in arizona-core
   - Fix revision handling in da9063
   - Fix 'assignment of read-only location' error in kempld-core
   - Avoid using the Regmap API when atomic in rn5t618
   - Redefine volatile register description in rn5t618
   - Use locking to protect event handler in dln2"

* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
  mfd: syscon: Use a unique name with regmap_config
  mfd: Replace HTTP links with HTTPS ones
  mfd: dln2: Run event handler loop under spinlock
  mfd: madera: Improve handling of regulator unbinding
  mfd: mfd-core: Add mechanism for removal of a subset of children
  mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
  mfd: max14577: Remove redundant initialization of variable current_bits
  mfd: rn5t618: Fix caching of battery related registers
  mfd: max77693-private: Drop a duplicated word
  mfd: da9055: pdata.h: Drop a duplicated word
  mfd: rn5t618: Make restart handler atomic safe
  mfd: kempld-core: Fix 'assignment of read-only location' error
  mfd: axp20x: Allow the AXP803 to be probed by I2C
  mfd: da9063: Add support for latest DA silicon revision
  mfd: da9063: Fix revision handling to correctly select reg tables
  dt-bindings: mfd: st,stmfx: Remove I2C unit name
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
  mfd: motorola-cpcap: Disable interrupt for suspend
  mfd: smsc-ece1099: Remove driver
  mfd: core: Add OF_MFD_CELL_REG() helper
  ...

2 files changed, 0 insertions, 61 deletions

diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index 902b93b17235..5ef2cfe3a16b 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -100,7 +100,6 @@ available subsections can be seen below.
    rfkill
    serial/index
    sm501
-   smsc_ece1099
    switchtec
    sync_file
    vfio-mediated-device
diff --git a/Documentation/driver-api/smsc_ece1099.rst b/Documentation/driver-api/smsc_ece1099.rst
deleted file mode 100644
index 079277421eaf..000000000000
--- a/Documentation/driver-api/smsc_ece1099.rst
+++ /dev/null
@@ -1,60 +0,0 @@
-=================================================
-Msc Keyboard Scan Expansion/GPIO Expansion device
-=================================================
-
-What is smsc-ece1099?
-----------------------
-
-The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion
-or GPIO Expansion device. The device supports a keyboard
-scan matrix of 23x8. The device is connected to a Master
-via the SMSC BC-Link interface or via the SMBus.
-Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals
-are multiplexed with GPIOs.
-
-Interrupt generation
---------------------
-
-Interrupts can be generated by an edge detection on a GPIO
-pin or an edge detection on one of the bus interface pins.
-Interrupts can also be detected on the keyboard scan interface.
-The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if
-any bit in one of the Interrupt Status registers is 1 and
-the corresponding Interrupt Mask bit is also 1.
-
-In order for software to determine which device is the source
-of an interrupt, it should first read the Group Interrupt Status Register
-to determine which Status register group is a source for the interrupt.
-Software should read both the Status register and the associated Mask register,
-then AND the two values together. Bits that are 1 in the result of the AND
-are active interrupts. Software clears an interrupt by writing a 1 to the
-corresponding bit in the Status register.
-
-Communication Protocol
-----------------------
-
-- SMbus slave Interface
-	The host processor communicates with the ECE1099 device
-	through a series of read/write registers via the SMBus
-	interface. SMBus is a serial communication protocol between
-	a computer host and its peripheral devices. The SMBus data
-	rate is 10KHz minimum to 400 KHz maximum
-
-- Slave Bus Interface
-	The ECE1099 device SMBus implementation is a subset of the
-	SMBus interface to the host. The device is a slave-only SMBus device.
-	The implementation in the device is a subset of SMBus since it
-	only supports four protocols.
-
-	The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the
-	only valid SMBus protocols for the device.
-
-- BC-LinkTM Interface
-	The BC-Link is a proprietary bus that allows communication
-	between a Master device and a Companion device. The Master
-	device uses this serial bus to read and write registers
-	located on the Companion device. The bus comprises three signals,
-	BC_CLK, BC_DAT and BC_INT#. The Master device always provides the
-	clock, BC_CLK, and the Companion device is the source for an
-	independent asynchronous interrupt signal, BC_INT#. The ECE1099
-	supports BC-Link speeds up to 24MHz.